Answer:
Defined as a situation in which the financial investments or holdings of Stanford University or the personal financial interests or holdings of institutional leaders might affect or reasonably appear to affect institutional processes for the design, conduct, reporting, review, or oversight of human subjects research.
3)A steel plant is to be constructed at a site where cooling water can be taken from a groundwater aquifer. It is planned to discharge the used cooling water to a small river. Summer flows and temperatures have historically ranged from 25 to 40 m3/s and 15 to 22 oC, respectively. The TCEQ has set a maximum stream temperature requirement of 25oC below the proposed discharge. Groundwater temperature is known to be constant at 120C. Heat dissipation requirements are 2x108J/s. Determine the maximum groundwater flow rate required to meet TCEQ requirements in water temperature. (4pts)
Check photos (2 pictures)
For an electrical system, short dashed lines indicate?
A solid line around a component indicates that the component is complete. A dashed line around the component indicates that the component is being shown is not complete.
Why did you choose agricultural and biosystem as a course? Help me guys
Answer:
To be able to develop as a human and give back to the community. To ensure that people have safe food and water to drink, clean fuel and energy sources, and in general a safe enviornment to live in.
Explanation:
The reasons why someone might choose to study agricultural and biosystems engineering are highly individual and can depend on a variety of factors, such as personal interests, career goals, and educational background.
What is agricultural and biosystem engineering?Many students who decide to study agricultural and biosystems engineering are interested in farming, making food, and sustainable agriculture. They might want to find new ways to make more food or improve how farmers work.
Agricultural and biosystems engineering is a field that focuses on creating systems and processes that are good for the environment.
Students who care about the environment may decide to learn about this subject because it focuses on reducing waste, saving resources, and causing less harm to the environment.
Agricultural and biosystems engineering is a field that combines different areas of knowledge such as biology, chemistry, physics, and computer science. Students who like to work in different subjects might find this field perfect for their interests and abilities.
Learn more on biosystem on https://brainly.in/question/53109597
#SPJ2
what are the temperature ranges in which a piece of equipment is classified to work?
A gas can auto ignite when exposed to a temperature higher than its
autoignition temperature
Temperature ranges gives the maximum exposed surface temperature
allowable of a device that is to be used in a hazardous, atmosphere
To enable end users determine the suitability of a product for a particular
usage, an equipment is put through test in order to classify them according
to temperature of exposed (to the atmosphere) unprotected surface
Whereby the atmosphere is explosive, there is a temperature at which the
it can spontaneously ignite known as the autoignition temperature,
therefore, it is important to use only equipment that belong to a temperature classification that is less than the auto ignition temperature of the location
The temperature classification can be presented as follows;
[tex]\begin{array}{|c|c|}Class&Surface \ Temperature \ ^{\circ }C\\T1&<450\\T2&<300\\T3&<200\\T4&<135 \\T5&<100\\T6&<85\end{array}[/tex]
The maximum allowable surface temperature of operation of a device
intended for use in an hazardous atmosphere is defined by the
temperature classification, which is also known as the T class
With knowledge of the gases present in the atmosphere, and the
autoignition temperature, accidents can be prevented
Learn more about operating temperature classification here:
https://brainly.com/question/18199083
The use of seatbelts in a car has significantly reduced the number of crash fatalities. Which statement best explains how societal demand guided the development of the seatbelt technology
as the public need for preventing injuries and deaths from car crashes became known,laws were enacted to mandate the inclusion of seatbelts in almost all passengers vehicles
Escribe dos gemplos de los cambios de conducta que
adquiere el trabajador
al momento de capacitarse.
Aprendizajes del buen vivir ya que al compartir con la comunidad y te desarrollas, tu desarrollas otra manera de pensar y adquieres el aprendizaje del buen vivir con todos sin excepción alguna
Además el aprendizaje de experimentar compartir con otras personas que no son tu familia, eso hará que desarrolles el aprendizaje de tus cualidades y en este caso sería la cualidad de la imparcialidad
1. The reference OSHA standard requires several important characteristics of a PFAS:
It must limit the maximum arresting force imparted to the body to
with the full
body harness.
The reference OSHA standard requires several important characteristics of a PFAS. The employer must ensure that personal fall arrest systems (PFAs) must:
a. Limit the maximum arresting force on the employee to 1,800 pounds (8 kN). The figure used above must be based on the use of a full body harness.
Maximum arresting force is the highest amount of force that the fall protection system and the individual attached to the system will face as gotten by the deceleration device.OSHA regulations gives the system performance criteria for a personal fall arrest system.
From the above, we can therefore say that The reference OSHA standard requires several important characteristics of personal fall arrest systems (PFAs) as employers must reduce the maximum arresting force on the employee to 1,800 pounds (8 kN) using full body harness.
Learn more
https://brainly.com/question/15049508
__________ is an example of an electrical device.
Plug
Cord
Cable
All of the above
Explanation:
is an example of an electrical device.
Cable
It is given thatopen parenthesis, x minus 2y, close parenthesis, times open parenthesis, x + 2y, close parenthesis, = 4Quantity A: x squared, minus, 4 times the quantity y squared Quantity B: 8 A. Quantity A is greater. B. Quantity B is greater. C. The two quantities are equal. D. The relationship cannot be determined from the information given.
Answer:
Quantity B is greater.
Explanation:
Given:
(x -2y)(x +2y) = 4
A = x² -4y²
B = 8
Find:
the relationship between A and B
Solution:
The given expression can be expanded to give ...
x(x +2y) -2y(x +2y) = x² +2xy -2xy -4y² = x² -4y²
This is precisely the expression designated as A. Its value is 4.
4 < 8
A < B
Quantity B is greater.
Project stem unit 0 lesson 5
Answer: Project STEM
Explanation: Develop a model to illustrate the role of photosynthesis and cellular respiration in the cycling of carbon among the biosphere
The device in Figure P6.27 is a sloshing bath used to wash vegetable produce. For the configuration shown, use the relative velocity method to graphically determine the angular velocity of the water bath as the crank is driven clockwise at 75 rpm.
check photo (answer)
The angular velocity of the water bath as the crank is driven clockwise is 6.66rpm/ms.
How to calculate the angular velocity?From the complete information, we are to use the relative velocity method to determine the angular velocity of the water bath.
This will be:
60/V = 1085.4/120.58
Cross multiply.
(1085.4 × V) = (120.58 × 60)
V = (120.58 × 60/1085.4)
V = 6.66rpm/ms
Learn more about angular velocity on:
https://brainly.com/question/626479
#SPJ2
Determine the gage pressure at the center of pipe A in pounds per square inch and
in kilopascals.
Answer: the stress is 384 pounds per square inch.
Step-by-step explanation:
Let S represent the stress in the material of the pipe.
Let P represent internal pressure of the pipe.
Let D represent internal diameter of the pipe.
Let T represent the thickness of the pipe.
The stress in the material of a pipe subject to internal pressure varies jointly with the internal pressure and the internal diameter of the pipe and inversely with the thickness of the pipe. Introducing a constant of proportionality, k, the expression becomes
S = kPD/T
The stress is 100 pounds per square inch when the diameter is 5 inches, the thickness is 0.75 inch, and the internal pressure is 25 pounds per square inch. It means that
100 = (k × 25 × 5)/0.75
125k = 100 × 0.75 = 75
k = 75/125 = 0.6
The equation representing the relationship becomes
S = 0.6PD/T
If the internal pressure is 40 pounds per square inch, the diameter is 8 inches and the thickness is 0.50 inch, then the stress would be
S = (0.6 × 40 × 8)/0.5
S = 384
4. When welding, the practice metal is called a
Answer:
Nonstandard
Explanation:
The mechanical energy of an object is a combination of its potential energy and its
The mechanical energy of an object is a combination of its potential energy and its kinetic energy.
If a construction company is considering a new type of material to use in their construction, which factors would they
focus on? (Select all that apply.)
that the new material does the same thing as an existing material but better
that the new material does the same thing as an existing material but cheaper
that the science behind the material be familiar to and understood by its employees
that the properties of the new material meet their construction needs
I would honestly select every one of the given options. Gor a company evaluating this new material it would be very valuable to hit each of these factors.
Which of these include some basic characteristics of taxi services? (Select all that apply.)Transactions are often negotiated at the time of use.Many taxi services are one-person and mom-and-pop businesses.Few taxi services are as extensive in range as either urban mass transit orcommercial airlines options.They do not usually involve long-term planning, beyond a single use.
The basic characteristic of the taxi service is that some taxi services are as extensive in range as either urban mass transit or commercial airlines.
Waht is a taxi service?A taxi is a cab that one hired b a single person or a group and they have a nonshared ride. The taxi service is found in various international destinations all over the world and especially at the airports, restaurants and hotels. Some place's taxi services are extensive and include the urban transits.
Find out more informaion about the taxi services.
brainly.com/question/25672789
A two-stage air compressor operates at steady state, compressing 10 m3 /min of air from 100 kPa, 300 K, to 1200 kPa. An intercooler between the two stages cools the air to 300 K at a constant pressure of 350 kPa. The compression processes are isentropic. Calculate the power required to run the compressor, in kW, and compare the result to the power required for isentropic compression from the same inlet state to the same final pressure.
check photos (answer)
Comparing this to the actual power required for the two-stage compressor (242.6 kW), we can see that the actual power required is significantly higher.
What is work done?Work done is the amount of energy transferred to or from a system as a result of a force acting on it over a distance.
To solve this problem, we can use the following steps:
Step 1: Determine the state points of the air at various stages of the compression process.
Stage 1: Inlet state = State 1
P1 = 100 kPa, T1 = 300 K, V1 = 10 m³/min
Stage 2: After the first stage of compression = State 2
P2 = 1200 kPa, T2 = ? (isentropic compression)
Stage 3: After intercooling = State 3
P3 = 350 kPa, T3 = 300 K, V3 = V2
Stage 4: After the second stage of compression = State 4
P4 = 1200 kPa, T4 = ? (isentropic compression)
Step 2: Calculate the temperature and specific volume at states 2 and 4 using the isentropic compression process.
For an isentropic compression process, we have:
(P2/P1)^((γ-1)/γ) = T2/T1
(P4/P3)^((γ-1)/γ) = T4/T3
where γ is the ratio of specific heats for air, which is approximately 1.4.
Solving for T2 and T4, we get:
T2 = T1*(P2/P1)^((γ-1)/γ) = 300*(1200/100)^((1.4-1)/1.4) = 742.6 K
T4 = T3*(P4/P3)^((γ-1)/γ) = 300*(1200/350)^((1.4-1)/1.4) = 892.5 K
Next, we can use the ideal gas law to calculate the specific volume of air at states 2 and 4:
V2 = V1*(P1/P2)(T2/T1) = 10(100/1200)(742.6/300) = 0.1867 m³/kg
V4 = V3(P3/P4)(T4/T3) = 10(350/1200)*(892.5/300) = 0.2604 m³/kg
Step 3: Calculate the work done in each stage of the compressor.
For an isentropic compression process, the work done can be calculated using the following equation:
W = (mCp)(T2-T1) = (mCp)(T4-T3)
where m is the mass flow rate of air, which can be calculated using the specific volume and inlet volumetric flow rate:
m = V1/(v160) = 10/(0.831460) = 0.2016 kg/s
Cp is the specific heat at constant pressure for air, which is approximately 1.005 kJ/kg-K.
Thus, the work done in each stage of the compressor is:
W1 = (0.20161.005)(742.6-300) = 77.2 kW
W2 = (0.20161.005)(892.5-300) = 116.9 kW
The total work done by the compressor is:
W_total = W1 + W2 = 77.2 + 116.9 = 194.1 kW
Step 4: Calculate the power required to run the compressor.
The power required to run the compressor can be calculated using the following equation:
Power = W_total/η
where η is the compressor efficiency.
We are not given the efficiency, but for a two-stage compressor, a reasonable estimate for η is reasonable estimate for the efficiency of a two-stage compressor is around 75-85%. Therefore, we can assume η = 0.8.
Using this efficiency value, the power required to run the compressor is:
Power = W_total/η = 194.1/0.8 = 242.6 kW
Step 5: Compare the result to the power required for isentropic compression from the same inlet state to the same final pressure.
For isentropic compression from the same inlet state to the same final pressure, the work done can be calculated using the following equation:
W = (mCp)(T2-T1) = (mCp)(T4-T3) = (m*Cp)*ΔT
where ΔT = T2-T1 = T4-T3 = 442.5 K
Thus, the work done for isentropic compression is: W_iso = (0.2016*1.005)*442.5 = 89.1 kW
For more details regarding work done, visit:
https://brainly.com/question/13662169
#SPJ2
Calculate moments about points A,B,C,D
Answer:
24cm sureeeereereeeeee
Steam enters the first-stage turbine shown in the figure at 40 bar and 400oC with a mass flow rate of 60,000 kg/hr. Steam exits the first-stage turbine at 20 bar and 400oC. The steam is then reheated at constant pressure to 500oC before entering the second-stage turbine. Steam leaves the second stage as saturated vapor at 0.6 bar. Assume steady state operation and ignore stray heat transfer and kinetic and potential energy effects. Determine the volumetric flow rate of the steam at the inlet to the first-stage turbine, in m3/min, the rate of heat transfer to the steam flowing through the reheater, in kW, and the total power produced by the two stages of the turbine, in kW.
Answer:
a) 62460 kg/hr
(b) 17,572.95 kW
(c) 3,814.57 kW
Explanation:
Which of the following workers are not likely to be paid during an election?
campaign press secretary
volunteer coordinator
poll worker
director of communications
Answer:
volunteer coordinator
Explanation:
because they are volunteering for that and in most of the cases they do not expect to be paid
Alvaro designs machinery and equipment for ships. His job title is best described as . Jeanette draws maps and plans for freeway projects. Her job title is best described as . Joseph designs a new airport. His job title is best described as . Geraldine designs imaging systems that use light. Her job title is best described as .
Answer:
Alvaro designs machinery and equipment for ships. His job title is best described as Marine Engineer.
Jeanette draws maps and plans for freeway projects. Her job title is best described as Civil Drafter.
Joseph designs a new airport. His job title is best described as Transportation Engineer.
Geraldine designs imaging systems that use light. Her job title is best described as Photonics Engineer.
Hope this helps sorry I am late to respond, but anyone else who needs the answer it is here.
Based on the above, Alvaro is a Marine Engineer;
Jeanette is a Civil Drafter.Joseph is a Transportation Engineer.Geraldine is a Photonics Engineer.What is machinery and equipment?Machinery and Equipment are known to be a type of industrial tools, devices, and items that aids facilities.
Conclusively, They are said to be tangible personal property that are used as a tool for repair parts, etc. Professions in ship jobs includes, Marine Engineer, Photonics Engineer, etc.
Learn more about machinery and equipment from
https://brainly.com/question/1203520
why a hard disk called a random access stroage device
RAM is called “random access” because any storage location on the computer can be accessed directly (as opposed to randomly).
How to make coconut harder
Now hear me out: Steel-Coated Coconuts
If you want to make a coconut harder you can take that shell up to heights its natural husk never even knew it could reach! Combining the raw, brown scraglley-ness with the tough, durable properties of steel would most definitely make a coconut harder.
Valid answer? Probably not.
Thank you for coming to TedTalk :))
An ideal Otto cycle with air as the working fluid has a compression ratio of 8. The minimum and maximum temperatures in the cycle are 540 and 2400 R. Accounting for the variation of specific heats with temperature, determine (a) the amount of heat transferred to the air during the heat-addition process, (b) the thermal efficiency, and (c) the thermal efficiency of a Carnot cycle operating between the same temperature limits
Please check all the photos ( answer)
5. What is the biggest danger when using
electric drills?
O A. Using the wrong size bit for the hole
required can ruin the drill.
O B. The bit could get caught and throw the
user.
O C. The bit coming loose in the drill can
cause a loss of torque.
O D. Static electricity can build up and
deliver an electric shock to the user.
Answer:
Static electricity can build up and
deliver an electric shock to the user drilling with an electric drill or any drill can create static electricity but with electric drills the static electricity can react with the drills power supply creating a short circuit proceeding to shock you which is why electric drills have rubber grips around them to INSULATE the shock if It does happen (also that's why the drills mostly are made up of non conductive materials.)
A house that was heated by electric resistance heaters consumed 1500 kWh of electric
energy in a winter month. If this house were heated instead by a heat pump that has an
average COP of 2.5, determine how much money the homeowner would have saved
that month. Assume a price of Tk 6/kWh for electricity.
Answer:
2.5=1500/Whp=> Whp=600 kWh
delWgain=1500-600=900 kWh
Money saved= 900* 6tk*=5400 tk
Who is Mario and Luigi
Answer:
they are fictional characters featured in video games etc
Answer: Mario and Luigi are game characters, which feature in the Super Mario Maker series, the Paper Mario series, but most notably, the Super Mario Bros. series. Mario debuted in Donkey Kong (1981), while Luigi debuted in Mario Bros (1983, not to be confused with Super Mario Bros, which released two years after Mario Bros).
Why do some ladders have a white tip or reflective tape attached to the tip?
i need your help to answer in the picture plss help me!
this looks like its the different phases of a single cylinder 4 stroke engine what are you doing in the picture or assignment though matching the numbers to the descriptions on the side?
2. A silo (base not included) is to be constructed in the form of a cylinder surmounted by a hemisphere. The cost of construction per square unit
of surface area is twice as great for the for the hemisphere as it is for the cylindrical side wall. Determine the dimensions to be used if the volume is fixed and the cost of construction is to be kept to a minimum. Neglect the thickness of the silo and waste in construction.
An extremum is a point where the function has its highest or lowest value, and at which the slope is zero.
The dimensions to be used if the volume is fixed and the cost of construction is to be kept to a minimum is as follows;
Height of cylinder = 2 × Radius of cylinderReason:
The given parameters are;
Form of silo = Cylinder surmounted by a hemisphere
Cost of construction of hemisphere per square unit = 2 × The cost of of construction of the cylindrical side wall
Required:
The dimensions to be used if the volume is fixed and the cost of construction is to be kept to a minimum
Solution:
The fixed volume of the silo, V, can be expressed as follows;
[tex]V = \pi \cdot r^2 \cdot h + \dfrac{2}{3} \cdot \pi \cdot r^3[/tex]
[tex]h = \dfrac{V - \dfrac{2}{3} \cdot \pi \cdot r^3 }{\pi \cdot r^2 }[/tex]Where;
h = The height of the cylinder
r = The radius of the cylinder
The surface area is, Surface Area = 2·π·r·h + 2·π·r²
The cost, C = 2·π·r·h + 2×2·π·r² = 2·π·r·h + 4·π·r²
Therefore;
[tex]C = 2 \times \pi \times r\times \dfrac{V - \dfrac{2}{3} \cdot \pi \cdot r^3 }{\pi \cdot r^2 } + 4 \cdot \pi \cdot r^2 = \dfrac{8 \cdot r^3 \cdot \pi + 6 \cdot V}{3 \cdot r}[/tex]
[tex]C = \dfrac{8 \cdot r^3 \cdot \pi + 6 \cdot V}{3 \cdot r}[/tex]At the minimum value, we have;
[tex]\dfrac{dC}{dr} =0 = \dfrac{d}{dr} \left(\dfrac{8 \cdot r^3 \cdot \pi + 6 \cdot V}{3 \cdot r} \right) = \dfrac{16 \cdot r^3 \cdot \pi - 6 \cdot V}{3 \cdot r^2}[/tex]Which gives;
16·π·r³ = 6·V
[tex]V = \dfrac{16 \cdot \pi \cdot r^3}{6} = \dfrac{8 \cdot \pi \cdot r^3}{3}[/tex]Which gives;
[tex]h = \dfrac{\dfrac{8 \cdot \pi \cdot r^3}{3} - \dfrac{2}{3} \cdot \pi \cdot r^3 }{\pi \cdot r^2 } = 2 \cdot r[/tex]
h = 2·r
The height of the silo, h = 2 × The radius, 2
Therefore, the dimensions to be used if the volume is fixed and the cost is to be kept to a minimum is, height, h = 2 times the radius
Learn more about extremum point here:
https://brainly.com/question/2869450
