Find the momentum (in kg m/s) for a 1.6 kg brick parachuting straight downward at a constant speed of 9.9 m/s

The force resultant is 10N.

We need to know about force resultant to solve this problem. The force resultant can be described as the sum of force according to the magnitude and direction. It can be written as

∑F = F1 + F2 + .... + Fn

where ∑F is force resultant, F1 is the first force and Fn is the n-force.

From the question above, the parameter given is

F1 = 5 N

F2 = 5 N

Because of the same direction, the force will be added up each other.

∑F = F1 + F2

∑F = 5 + 5

∑F = 10 N

Hence, the force resultant is 10N.

For more on force resultant at: https://brainly.com/question/25239010

#SPJ4

The magnitude of the acceleration of the moon towards the earth is 0.003 [tex]m/s^2[/tex].

The acceleration means the rate with which the velocity of an object changes.

The time the moon takes to complete one revolution, t = 27.3 days = 2358720 s

The distance travelled in circular path, d = [tex]2\pi r[/tex] = [tex]24015\times 10^8[/tex] m

where radius r = [tex]3.844\times 10^8[/tex] m

The formula in circular motion is :

[tex]a=\frac{v^2}{r}[/tex]

[tex]v=\frac{d}{t}[/tex]

So substituting the values:

[tex]a=\frac{(1.024\times 10^3)^2}{3.844\times 10^8}[/tex]

[tex]a\approx 2.8\times 10^{-3} \ m/s^2[/tex]

[tex]\therefore a\approx 0.003 \ m/s^2[/tex]

The value of the acceleration of the moon towards the earth is 0.003 [tex]m/s^2[/tex].

To learn more about Attention here:

https://brainly.in/question/29716405

#SPJ4

The position where the package strikes the ground is 136.3m.

Use the following kinematic equation;

h = vt + ¹/₂gt²

179 = 47t  +  ¹/₂(9.8)t²

179 = 47t + 4.9t²

4.9t² + 47t - 179 = 0

solve the quadratic equation using formula method;

a = 4.9, b = 47, c = -179

t = 2.9 seconds

X = vt

X = 47m/s x 2.9 s

X = 136.3 m

Thus, the position where the package strikes the ground is 136.3m.

Learn more about time of motion here: https://brainly.com/question/2364404

#SPJ1

1.22 x 10⁸ nm is the wavelength of radiation.

2.45 x 10⁹ = frequency(v)

3.00 x 10⁸ = speed of light(c)

(3.00 x 10⁸ m/s)/(2.45 x 10⁹ Hz)= 1.22 x 10⁸ nm

1.22 x 10⁸ nm is the wavelength of radiation.

learn more about wavelength here

https://brainly.com/question/6297363

#SPJ4

A. The frisbee will remain in the air for 5.88 s

B. The horizontal distance the frisbee will go is 29.4 m

The time the frisbee will spend in the air can be obtained as illustrated below:

169.2 = ½gt²

169.2 = ½ × 9.8 × t²

169.2 = 4.9 × t²

Divide both side by 4.9

t² = 169.2 / 4.9

Take the square root of both side

t = √(169.2 / 4.9)

Time = 5.88 s

The horizontal distance travelled by the frisbee can be obtained as follow:

s = ut

s = 5 × 5.88

Horizontal distance = 29.4 m

Learn more about motion under gravity:

https://brainly.com/question/22719691

#SPJ1

F is continuous on (2,5) and the range is provided as a bounded interval

Although not true for all functions listed [2,5], this is conceivable. For instance, the unbounded range of the function f(x)=x3 is (), which is defined and continuous on the interval [2,5].

When a function is specified at each point along an interval without any gaps, leaps, or interruptions, the interval is said to be continuous for that function.

We say that a function f(x) is continuous on the interval [a, b] if it meets these requirements from x=a to x=b, for instance.

At the right endpoint b, a function is continuous if. The reasons why the endpoints are defined individually.

Because only one way can be used to check for continuity, the endpoints are defined independently. The values will not be in the domain and won’t apply to the function if the limit of an endpoint is checked from a side that is outside the domain.

To know more about continuity of A function visit:

https://brainly.com/question/12990870

#SPJ4

32.9%, is the percentage of compound left after 6.07 minutes.

We utilize the equation A(t) = A0e-kt for decomposition, where A0 is the beginning amount of the decomposed substance at time t = 0, k is the decay constant, t is the passing of time, and A(t) is the amount at the end of time t.

The original amount, [A0], multiplied by 100 to get [A(t)], or A/A0*100, is the fraction of the decomposed molecule that is still present after time t:

A = A0e-kt

Divide both sides by A0, k = 0.00299, and A/A0 = e-0.00299t.

A/Ao is equal to e-0.00299*372, where

t = 6.2 min*(60 sec/ 1 min)

= 372 sec.

A/A0 = .3288 = 32.9%,

Learn more about compound here-

https://brainly.com/question/13516179

#SPJ4

The body would be moved in the forward direction by a net force of 10N.

We know that force is a vector quantity. This implies that it has both magnitude and direction. The net force that acts on a body is the resultant force and this is the force that would move the object in a given direction. The object moves in the direction of the net force.

We are told that the forward force =  60 N

The backwards force = 50 N

We now have to determine the net force in order to understand the direction in which the body would move.

Net force = 60 N - 50 N = 10 N

It then follows that the body would be moved in the forward direction by a net force of 10N.

Learn more about net force:https://brainly.com/question/27573481

#SPJ1

The fusion of hydrogen nuclei in stars produced all of the helium in the Universe.

However, most stars undergo an internal transformation after turning a considerable percentage of their hydrogen to helium. The interior core compresses and warms up until it is hot enough to fuse helium into bigger atoms, for as by fusing three helium atoms into carbon. At the same time, some helium will combine with the carbon to generate oxygen. Outside the core, in what is known as the envelope, there is still enough hydrogen to fuse into additional helium. However, the center starts fusing heavier nuclei. This, by the way, is the transition from a 'regular' star like our Sun to a Red Giant.

After the red giant phase, the Sun will shed its outer layers, leaving behind a helium-rich core that will gradually cool throughout the course of the Universe. After the red giant phase with stars more massive than the Sun, it becomes practically a free for all for producing heavier and heavier atoms. When the helium in the core runs out, the star collapses again, heats up, and begins fusing carbon and oxygen into bigger atoms. If the star is large enough, this will continue until iron is fused. At such time, a hotter core will still not result in fusion. The star falls, becomes unstable, and explodes, resulting in supernovae and neutron stars (or black hole).

To learn more about fusion in the solar core. Click https://brainly.com/question/14445690

#SPJ4

Answer:

Option C

Explanation:

Initial frequency of rotation ν

i

=1800 rpm =1800/60=30 rps

Thus initial angular frequency w

i

=2πν

i

=60π rad/s

Final frequency of rotation ν

f

=3000 rpm =3000/60=50 rps

Thus final angular frequency w

f

=2πν

f

=100π rad/s

∴ Angular acceleration α=

t

w

f

−w

i

OR α=

20

100π−60π

=2π rad/s

2

The resultant voltage is calculated as 0.315 V

It is given that

E = 91.9 mj

Q = 2.91c

V = E/Q

=91.9 x [tex]10^{-3}[/tex] / 2.91

= 31.58 mV

= 0.03158 V

Thus, the resultant voltage is calculated as 0.315 V

The difference in electric potential between two points, which is defined as the work required per unit of charge to move a test charge between the two points, is known as voltage, electric potential difference, electric pressure, or electric tension.

Voltage can also be described as the pressure from an electrical circuit's power source that helps to push the charged electrons (current) through a conducting loop, that enables them to do work such as illuminating a light.

To know more about voltage, visit:

https://brainly.com/question/13521443

#SPJ4

The integers can be arranged in the form of 10p - 1 such that p = 1-7 in the was as follows:

10p-1 = (10*1) - 1 = 9 = [tex]3^{2}[/tex] = 3x3

10p-1 = (10*2) - 1 = 19 = [tex]19^{1}[/tex]

10p-1 = (10*3) - 1 = 29 = [tex]29^{1}[/tex]

10p-1 = (10*4) - 1 = 39 = 3x13

10p-1 = (10*5) - 1 = 49 = [tex]7^{2}[/tex] = 7x7

10p-1 = (10*6) - 1 = 59 = [tex]59^{1}[/tex]

10p-1 = (10*7) - 1 = 69 = 3x23

Here we see that not all are in the form of 2^n x 5^m where n and m are non-negative integers.

As per the rule, if A =p/q be a rational number such that p and q are co-prime and the prime factorization of q is not in the form of 2^n x 5^m where n and m are non-negative integers, then A has a decimal expansion which is non-terminating recurring decimal.

To know more about prime factorization, visit:

https://brainly.com/question/10454590

#SPJ4

The rate at which F is decreasing is 0.12 mol / L s

Given that,

2 D(g) + 3 E(g) + F(g) → 2 G(g) + H(g)

Rate of reaction = - ΔD / 2 Δt = - ΔE / 3 Δt = - ΔF / Δt = ΔG / 2 Δt = ΔH / Δt

Given that,

- ΔE / Δt = 0.36 mol / L s

- ΔE / 3 Δt = - ΔF / Δt

- 0.36 / 3 = - ΔF / Δt

- ΔF / Δt = - 0.12 mol / L s

The rate of reaction is the measure of how quickly or slowly that a reaction proceeds.

Therefore, the rate at which F is decreasing is 0.12 mol / L s

To know more about rate of reaction

brainly.com/question/8526467

#SPJ4

It is false that asteroids were recently formed by the collision and breakup of an object orbiting in the asteroid belt.

Asteroids are stony objects that orbit the sun but are too tiny to be classified as planets. They're also referred to as planetoids or small planets. There are millions of asteroids that range in size from hundreds of kilometers to a few feet. The combined mass of all asteroids is less than that of Earth's moon.

The solar system's makeup is fairly uniform. The combined mass of the planets is substantially less than that of the Sun. The majority of comets have short periods and orbit near the ecliptic plane.

The asteroid belt is a torus-shaped area in the Solar System lying roughly between Jupiter and Mars' orbits. It is home to a large number of solid, irregularly shaped things of various sizes, but far smaller than planets, known as asteroids or minor planets. To distinguish it from other asteroid populations in the Solar System, such as near-Earth asteroids and Trojan asteroids, this asteroid belt is sometimes known as the major asteroid belt or main belt.

To learn more about asteroids. Click, https://brainly.com/question/19161842

#SPJ4

The ribbon replaces the menus and toolbars in previous versions. The Ribbon makes available most of the functions that were previously hidden in the File menus.

The ribbon is a command panel that organizes program functions into a series of tabs at the top of the screen. Ribbon tabs consist of groups of closely related commands to help users quickly find the commands they want. Each ribbon is a bar across the page.

The advantages of using the ribbons are:

To know more about ribbon,

https://brainly.com/question/13151054

#SPJ4

The presentation layer is sometimes known as the syntax layer since it is in charge of ensuring that the data it either receives or transmits to other layers has the correct syntax. Data sent across the network is formatted and encrypted by the presentation layer.

The presentation layer, which is layer 6 in the seven-layer OSI model of computer networking, acts as a network's data translator. It is referred to as the syntactic layer at times.

The communication is given to the top layer in a defined format thanks to the presentation layer (Layer 6). It deals with the messages' syntax and meaning. Communication across disparate systems, encrypts messages from the user-dependent format to the common format and vice versa.

The presentation layer, which is located at Layer 6 of the Open Systems Interconnection (OSI) communications architecture, makes sure that all communications passing through it are in the right format for the destination application. In other words, from the application layer's point of view, it provides the data in a comprehensible format.

To learn more about the presentation layer, refer to:

https://brainly.com/question/12974549

#SPJ4

Atp, or Adenosine triphosphate, provides energy for nerve impulse conduction, muscle contraction, and many other chemical reactions necessary for life.

Adenosine triphosphate is an essential molecule in cellular energy production such as protein phosphorylation and RNA production. It is produced during photophosphorylation and cellular respiration, and is consumed by many enzymes in the catalysis of numerous chemical processes.

It is composed in the center of the molecule by: a five-carbon sugar (ribose), which binds to the nitrogenous base adenine and a chain of three phosphates. Its molecular formula is C₁₀H₁₆N₅O₁₃P₃

It is the science or branch of biology that studies the structure of living beings in their evolutionary stages. Anatomy is subdivided into: plant and animal.

Learn more about anatomy at brainly.com/question/14760340

#SPJ4

Charge enter a length of the axon during this process is 1.2544C

CHARGE : It is a physical property of matter that causes it to experience a first, then it placed in between the electromagnetic field.

During the inflow part of a cycle in the neurons approximately

5.6× 10¹¹Na ions per meter,

each with a charge of +e enter the axon.

Therefore, ions will be (5.6 ×10¹¹) × (1.4/100)

                                 =  7.84 × 10⁸  Na ions

Charge of an electron is 1.6 × 10⁻¹⁹Coulombs

Thus; 7.84 ×10⁸ ×1.6 ×10⁻¹⁹

= 1.2544×10⁻¹⁰ coulombs

Charge enter a length of the axon during this process is 1.2544C

The given question is incomplete the complete question is  

How many coulombs of charge enter a 1.4 cm length of the axon during this process?

To know more about charge

https://brainly.com/question/2805673

#SPJ4

A solution is prepared by adding 1.43 mol of KCL to 889 g of water. The concentration of KCL is 1.61 molal.

Molar concentration, also known as molarity, quantity concentration, or substance concentration, is a unit used to describe the amount of a substance in a solution expressed as a percentage of its volume.

The number of moles per liter, denoted by the unit symbol mol/L or mol/dm3 in SI units, is the most often used unit denoting molarity in chemistry. One mol/L of a solution’s concentration is referred to as one molar or 1 M.

Mol of Kcl (potassium chloride) = 1.43

water = 889 g = 0.889kg

Molality = Moles of solute/kilograms of solvent

So, it comes as m = 1.43/0.889 = 1.61 molal

To know more about molality, visit:

https://brainly.com/question/4479955

#SPJ4

The analysts at techno infosystems are considering the four-model approach to system development for a new client. if they make use of the four-model approach, the outcome will be the time taken to develop the model increases.

With a commitment to giving Government PSUs, Educational Institutions, and All Organizations across the country a competitive advantage by making current operations efficient & cost-effective, Techno is a brand name of Richa Infosystems Limited, which is working under the government's initiative to support "Vocal for Local."

The speed of techno, a kind of electronic dance music, frequently ranges between 120 and 150 beats per minute and is typically generated for usage in a continuous DJ set. Common time is usually used for the core rhythm, which is frequently distinguished by a repeating four on the floor beat.

Electronic dance music without vocals or a typical popular song structure, with a quick pace and artificial noises.

Learn more about techno infosystem:

https://brainly.com/question/14993208

#SPJ4

A laser emits light with a frequency of 5.69 x 10^14 s-1 then the energy of one photon of the radiation from this laser is 3.7 x 10^(-19).

The energy emission in the form of electromagnetic waves or in the form of moving subatomic particles which are especially high-energy particles which cause ionization is called as the phenomenon of radiation.

Any kind of energy that emanates from a source and moves through space at the speed of light is referred to as radiation. This energy has wave-like qualities and is accompanied by an electric field and a magnetic field.

Here ∨ = 5.69 x 10^(14) s-1

we know E=h∨

where h = 6.626 x 10^(-34) js

putting the value in the formula, we have,

6.626 x 10^(-34)  x 5.69 x 10^(-34)

=3.7 x 10^(-19)

To know more about radiation, visit:

https://brainly.com/question/20604369

#SPJ4

Bulk modulus of Oxygen is 1.44×10^5 Pa

Given:

mass of Oxygen = 39.9 g

volume of Oxygen = 27.9 l

speed of sound in oxygen = 342 m/s

To Find:

Bulk modulus of Oxygen

Solution:

The density of oxygen gas is

ρ = 0.0399/0.0279 = 1.43 kg/m^3

From v = √B/ρ we find

B = v^2ρ

B = (317 m/s)^2 x (1.43 kg/m^3)

B = 1.44×10^5 Pa

Hence, Bulk modulus of Oxygen is 1.44×10^5 Pa

Learn more about Bulk modulus here:

https://brainly.com/question/24179667

#SPJ4

Yes, the given statement is true.

An electron not only moves around the nucleus but also rotates on its own axis, thus generating a tiny magnetic field. The direction of the field is described by the spin quantum number, ms, which is not related to any specific orbital but is a property of the electron itself.

An atom is made up of three fundamental particles electrons, protons, and neutrons, and a positively charged nucleus. In an atom, electrons rotate on their axis as well as aorund the nucleus.

The rotational movement of electrons around the nucleus creates a magnetic field.

However, the magnetic forces cancel out each other due to the opposite spins of the electrons.

similarly, in a wire, the movement of electrons generates a magnetic field around the wire.

If you need to learn more about magnetic fields click here:

https://brainly.com/question/27939568

#SPJ4

To include a css file in an html document, you use the link element.

While CSS determines the look and layout of a website, HTML defines its content and organisational structure. Together, the two languages make it possible to build a well-organized, useful website.

The id selector chooses a particular HTML element by using the id property. The id selector is used to choose a single distinct element since each element's id is distinct inside a page. A hash (#) character should be written after the element's id in order to pick it.

There are three techniques to include CSS in HTML documents: Using the style property inside HTML elements is known as "inline." Utilizing a "style" element in the "head" section is one internal method. External – by linking to an external CSS file using the link> element.

learn more about css file  refer

https://brainly.com/question/27818468

#SPJ4

During the time that a planet is in its period of apparent retrograde motion, over many weeks or days, the planet moves west relative to the stars, rather than the usual east relative to the stars

All the planets orbit the Sun in the exact direction, and if you envision a place above the Earth's north pole, you can see them traveling anticlockwise. The normal motion is anticlockwise and is recognized as 'prograde.'

When a planet is in apparent retrograde motion, it appears to be the planet moving west relative to the stars, rather than the usual east relative to the stars, frequently zigzagging or looping as it goes. The planet appears to be moving backward to the viewer. The word "retrograde" means "to move backward."

To learn more about the retrograde motion: brainly.com/question/22921263

The vector v with the given magnitude and the same direction as u. magnitude direction v = 4 u =< 1, 1>

=4/[tex]\sqrt2{^{2} }[/tex] i + 4/[tex]\sqrt2{^{2} }[/tex] j

Vector, in physics, a quantity that has both magnitude and the direction. It is a typically represented by an arrow whose direction is the same as that of the quantity and whose length is proportional to the quantity’s magnitude. Although vector has magnitude and direction, it does not have the position. That is, as long as its length is not changed, vector is not altered if it is displaced parallel to itself.

In contrast to vectors, ordinary quantities that have a magnitude but not a direction are called the scalars. For example, displacement, velocity, and acceleration are vector quantities, while the speed (the magnitude of velocity), time, and mass are scalars.

To qualify as a vector, a quantity having magnitude and direction must also obey certain rules of the combination.

Therefore,

A vector a with given magnitude in the direction of b, is given by:

(||a||.b)/||b||

||u||=[tex]\sqrt{1^{2}+1^{2} }= \sqrt{2^{2} }[/tex]

||v||=4

[4(1+1)]/[tex]\sqrt{2^{2} }[/tex]= 4/[tex]\sqrt2{^{2} }[/tex] i + 4/[tex]\sqrt2{^{2} }[/tex] j

To know more about scalar visit: https://brainly.com/question/21925479

#SPJ4

Here is the difference between contact forces and non-contact forces:

Contact forces are forces that result from two objects coming into physical contact with each other. Non-contact forces are forces that result from the interaction of objects that are not in contact with each other.

The charge of the ion is +3. Because there are 3 extra or +3 when you subtract 83 from 80, bismuth is Bi+3 (plus 3 is the ion charge)

Conventionally, the charge of an electron is thought to be negative; this charge is equal to and opposite to the charge of a proton, which is thought to be positive. Because the total number of electrons in an ion is more than the total number of protons, the net charge of an ion is not zero.

In contrast to an anion, which is negatively charged but has more electrons than protons, a cation is an ion that is positively charged but has fewer electrons than protons.

Electrostatic force causes opposite electric charges to be drawn towards one another, causing cations and anions to attract one another and easily form ionic compounds.

To know more about charge of an ion visit:

https://brainly.com/question/11938054

#SPJ4

The distance travelled by the body on last second of its upwards journey is 4.935m

What is projectile motion?

A projectile is an object or particle that is launched toward the surface of the Earth and moves along a curved path only under the influence of gravity.

To solve this question, consider the horizontal distance to be H and

distance traveled by the body in the last second be d

[tex]H=U^{2} /2g[/tex]

[tex]H=100^{2} /2*9.8[/tex]

H=510.2m

Now time taken to reach a height of

510.2 m= [tex]\sqrt[n]{2H/g}[/tex]

=10.2 seconds

Now,

[tex]s=ut+1/2gt^{2}[/tex]

[tex]H-d= (100)(t-1)-1/2g(t-1)^{2}[/tex]

[tex]510.2-d=100*9.2-1/2*9.8*9.2^{2}[/tex]

d=4936m

So, the correct answer is '4.936m'.

To know more about projectile motion visit:

https://brainly.com/question/11049671

#SPJ4

Astronomers are interested in building observatories capable of detecting neutrinos, cosmic rays, and gravitational waves because these are not forms of light, they can provide information about the objects that emit them that light cannot.

Astronomers study the heavens at X-ray wavelengths using satellites and earth-orbiting observatories. Because X-rays and gamma rays are absorbed high in the Earth's atmosphere, instruments to observe this radiation must be placed in orbit above the atmosphere.

 Astronomy relies on electromagnetic radiation to help us see the universe. It allows us to see (visual light) on Earth. Pulsars, for example, emit X-rays but not visible light, which is how we know they exist. Neutrinos are also made up of energy, but they are made up of radioactive decay.

This enables scientists to measure them despite the fact that they can pass through almost anything without being noticed. Gravitational waves are disturbances caused by the curvature of space that expand at a specific rhythm or "force" that travels at the speed of time. Because they can all be measured without being light, they are ideal for being found in space to create more knowledge about the universe.

Learn to know more about astronomers at

https://brainly.com/question/1003405

#SPJ4