among the three named compounds, predict which one has the highest viscosity at 25°c. ethane pentane decane

Answers

Answer 1

Decane has the highest viscosity at 25°C.

The viscosity of a fluid is a measure of its resistance to gradual deformation by shear stress or tensile stress.

Viscosity depends on intermolecular interactions and molar mass of the substance.

Ethane, pentane and decane are acyclic saturated hydrocarbons (alkanes).

At 25°C, ethane (C₂H₆) is in gaseous state of matter. Its molecular mass is the smallest of these three molecules, so it has lowest viscosity.

Decane (C₁₀H₂₂) and pentane (C₅H₁₂) are liquids at 25°C, but decane has greater molecular mass, therefore the highest viscosity.

M(C₂H₆) = 30 g/mol; molar mass of an ethene

M(C₁₀H₂₂) = 72 g/mol; molar mass of pentane

M(C₅H₁₂) = 144 g/mol; molar mass of decane

More about viscosity: brainly.com/question/2568610

#SPJ4


Related Questions

A graduated cylinder is filled 10.10 mL with water and a piece of granite is placed in the cylinder, displacing the level to 19.45 mL. What is the volume of the granite piece in mL?

Answers

The volume of the granite piece in milliliters if a graduated cylinder is filled 10.10 mL with water and a piece of granite is placed in the cylinder, displacing the level to 19.45 mL is 9.35mL.

How to calculate volume?

Volume of a substance refers to the amount of that substance in a container. The volume is measured in litres (L), which can be converted to milliliters (mL) as follows:

1 Litre = 1000 milliliters

According to this question, a graduated cylinder is filled 10.10 mL with water and a piece of granite is placed in the cylinder, displacing the level to 19.45 mL.

This means that the volume the granite occupies is as follows:

Volume of granite = 19.45mL - 10.10mL = 9.35mL

Therefore, the volume of the granite piece in milliliters if a graduated cylinder is filled 10.10 mL with water and a piece of granite is placed in the cylinder, displacing the level to 19.45 mL is 9.35mL.

Learn more about volume at: https://brainly.com/question/18090062

#SPJ1

An unknown substance has a density of 2.5g/ml. is this a physical or
chemical property? how do you know?
1 point
density is a chemical property because every substance has a unique density that we
can use to identify it.
density is a physical property because we can find it for a substance without
changing the identity of the substance.
o density is a chemical property because all chemicals have a density.
o density is a physical property because we can measure it.

Answers

An unknown substance has a density of 2.5g/ml. Density is a physical property because we can find it for a substance without changing the identity of the substance. The correct option is B.

What are physical properties?

Physical properties are those properties that can be seen by seeing the matter of the object. Density is a physical property. It does not depend upon the chemical composition of the object.

Thus, the correct option is B. Density is a physical property because we can find it for a substance without changing the identity of the substance.

To learn more about physical properties, refer to the link:

https://brainly.com/question/2217499

#SPJ4

A flask weighs 43.50 g when it is empty and 105.50
g when filled with water. when the same flask is
filled to the same volume with another liquid, the
mass is 96.75 g. what is the density of the second
liquid? (the density of water is 1 g/ml.)

Answers

The density of the second liquid is 0.4496.

What is density?

"Density is the mass per unit volume." Density is known as a scalar quantity. It is denoted by a small d and the symbol for density is given as rho, a Greek symbol. Density is calculated as mass divided by volume.

The first density is

A flask weighs 43.50 g = M1

The mass is 96.75 g = M2

D1 = 1 g/ml

Density 2 = ?

The formula

M1 x D1 = M2 x D2

43.50 g x 1 g/ml = 96.75 g x D2

D2 = 43.50 g x 1 g/ml / 96.75 g = 0.4496.

D2 = 0.4496

Thus, the density of the second liquid is 0.4496.

To learn more about density, refer to the link:

https://brainly.com/question/13225050

#SPJ4

1. 34g of CaCO3 was heated and decomposed completely. The reaction equation is shown below.
CaCO3(s) --> CaO(s) + CO2(g)

1.1 calculate the number of moles of CaCO3 that decomposed
1.2. Calculate the number of particles of CaO that can be produced

Answers

The number of particles produced is 8.1 * 10^21 particles.

What is number of particles?

The equation of the reaction is; [tex]CaCO3(s)-- > CaO(s) + CO2(g)[/tex]. We can be able to obtain the number of moles of the calcium carbonate can be obtained from;

Mass = 1.34 g

Molar mass = 100g

Number of moles =  1.34 g/ 100g = 0.0134 moles

Thus, the number of moles of carbonate that decomposed is  0.0134 moles

Given that the reaction is 1:1 and there are 6.02 * 10^23 particles in 1 mole of CaO, the number of particles of  CaO produced is;

0.0134 moles *  6.02 * 10^23 particles = 8.1 * 10^21 particles

Learn more about reaction equation:https://brainly.com/question/3588292

#SPJ1

3. Which of the following is not an example of acceleration?
a. A car coming to a stop at a stoplight.
b. An avalanche increasing speed down the side of a mountain.
c. A cheetah running at a constant speed on a hunt.
d. A jet making a sharp turn in an air show.

Answers

Answer:

C: The Cheetah running at a constant speed.

Explanation:

Acceleration can be defined as:

1: A decrease in speed

2: An increase in speed

3: A change in direction.

The cheetah is the only object that does not meet any criteria for acceleration.

The example that is not an example of acceleration is a cheetah running at a constant speed on a hunt. The correct option is option (c).

Acceleration refers to a change in velocity, either in magnitude or direction. In the case of the cheetah running at a constant speed, there is no change in velocity, so there is no acceleration.

The cheetah maintains a steady speed,  there is no change in velocity hence, it is not accelerating.

Therefore, a cheetah runs at a constant speed on a hunt. The correct option is option (c).

To know more about acceleration:

https://brainly.com/question/30499732

#SPJ6

Which combinations of single and double bonds are possible around a carbon atom?

Answers

Two Single and One Double Covalent Bond  are possible around a carbon atom. After the hydrogen, helium, and oxygen, carbon is the fourth most prevalent element in the universe by mass and the fifteenth most abundant element in the crust of the Earth.

Carbon can be considered a common component of all known life due to its abundance, distinctive diversity of organic compounds Bond and exceptional capacity to build polymers at Earth's typical temperatures. After oxygen, it makes up around 18.5% of the total mass of the human body. The allotropic form of carbon exhibits a wide range of physical properties.

To learn more about Carbon, click here.

https://brainly.com/question/22530423

#SPJ4

2. What is the concentration in mol dm-3 of a solution which contains 3 moles of a given solute in 0.25dm³ (250cm³) of solution.​

Answers

The concentration in mol dm-³ of a solution which contains 3 moles of a given solute in 0.25dm³ (250cm³) of solution is 12 mol/dm³.

How to calculate molarity?

The concentration of a solution can be calculated by dividing the number of moles of the solution by its volume as per the following formula;

Concentration = moles ÷ volume

According to this question, a solution contains 3 moles of a given solute in 0.25dm³ (250cm³) of solution. The concentration of the solution can be calculated as follows:

Concentration = 3moles ÷ 0.25dm³

Concentration = 12 mol/dm³

Therefore, the concentration in mol dm-³ of a solution which contains 3 moles of a given solute in 0.25dm³ (250cm³) of solution is 12 mol/dm³.

Learn more about concentration at: https://brainly.com/question/202460

#SPJ1

The chemical released by the synaptic vesicles of neurons during synaptic transmission is called:___.

Answers

Answer:

a neurotransmitter

Explanation:

What is reduced and what is oxidized in the reaction between a monosaccharide and a ferric ion?

Answers

In the reaction between a monosaccharide and a ferric ion, The carbonyl carbon is oxidized to a carboxyl group, the cupric ion is reduced.

Chemical reactions often involve color changes, temperature changes, gas evolution, or precipitate formation. Simple examples of everyday reactions are digestion, combustion, and cooking. The definition of reaction is a reaction. An example of a reaction is someone stopping their car at a stop sign. noun. response to stimuli.

The five basic types of chemical reactions are combination, decomposition, single exchange, double exchange, and combustion. By analyzing the reactants and products of a particular reaction, we can classify them into one of these categories. Some responses fit into multiple categories. It is modeled after the old Italian reaction, the French response, derived from the medieval Latin response (nominative to react). It is a noun of action formed in Late Latin from the past participle stem of the Latin reader.

Learn more about the reaction  here

https://brainly.com/question/11231920

#SPJ4

Energy-requiring reactions can occur in biological systems because they can be coupled with reactions that are?

Answers

Energy-requiring reactions can occur in biological systems because they can be coupled with reactions that are exergonic reaction.

In chemical thermodynamics, an exergonic reaction is a chemical reaction where the conversion in the free energy is negative (there is a net allow to leave of free energy). This shows a unbidden reaction if the structure is closed and starting and final temperatures are the similar.

Formula of exergonic reaction :

∆G = Gproducts - Greactants

where

∆G = change in free energy

G-products = free energy of products

G-reactants = free energy of reactants

Now, it can understood that "Energy - requiring reactions can occur in biological systems because they can be coupled with reactions that are exergonic reactions."

To know more about Exergonic Reactions here :

https://brainly.com/question/11064909

#SPJ4

What are the equilibrium partial pressures of coco and co2co2 if coco is the only gas present initially, at a partial pressure of 0.900 atmatm ?

Answers

                                                 CO                     CO2

Initial partial pressure               1                        0.9

Equilibrium partial pressure     1 - x                     0.9 + x

The equilibrium constant is Kp=PCO2/PCO.

Substitute values: 0.259=(0.9+x) / 1−x

Hence, x = .  -0.509

Hence, the equilibrium partial pressures of CO and CO2 are 1.509 atm, -0.509 atm respectively.

The pressure that is exerted with the aid of one among the mixture of gases if it occupies the identical quantity on its very own is acknowledged as Partial pressure. Every gasoline exerts sure strain in a mixture.

Learn more about  Partial pressure here:

https://brainly.com/question/13199169

#SPJ4

if anyone sees this can they help out?

Examine the table for the densities of various substances above. If a student has an unknown substance with a mass of 51.3 g and a volume of 4.5 ml. A milliliter is equivalent to a cubic centimeter. Which statements can be supported by the information given here? Select ALL that apply.

A The substance is likely nickel.
B The substance is likely gold.
C The substance will float in water.
D The substance will sink in water.
E The substance is likely lead.

Answers

Answer:

The answers are is that they are likely lead and the substance will sink in water.

Explanation:

First of you have the formula Density=Mass/volume

I substituted 51.4 for mass and 4.5 for volume and divided it to get 11.4. According to the table Lead has 11.4 density. Then once you got that you redo the formula and the substance will most likely sink because it has more than 1 g/cm^3.

Hope this helps!

Also I did it on USA Test Prep c:

identify the properly written and balanced equation for the precipitation reaction between potassium phosphate and magnesium sulfate.

Answers

Balanced equation for the precipitation reaction between potassium phosphate and magnesium sulfate:

2K₃PO₄(aq) + 3MgSO₄ → Mg₃(PO₄)₂ + 3K₂SO₄

K₃PO₄ is the salt potassium phosphate, it is soluble in water

MgSO₄ is the salt magnesium sulfate

Mg₃(PO₄)₂ is the insoluble salt magnesium phosphate, it forms precipate in this reaction

K₂SO₄ is the salt potassium sulphate, it is soluble in water

In a precipitation reaction substances react to form one or more solid products (in this example magnesium phosphate).

This chemical reaction is double displacement reaction - cations and anions of the two reactants switch places and form two new compounds.

More about chemical reaction: brainly.com/question/6876669

#SPJ4

A solution with ph 4 has __________ the h concentration of a solution with ph 8.

Answers

A solution with ph 4 has 10000 times the h concentration of a solution with ph 8.

the solution, in chemistry, is a homogeneous mixture of two or more substances whose relative amounts can be varied continuously up to the so-called solubility limit. The term solution is usually applied to the liquid state of aggregation, but gaseous and solid solutions are also possible. Hypotonic, isotonic, and hypertonic solutions (tonic).

A solution is a homogeneous mixture of two or more components with particle sizes less than 1 nm. Common examples of solutions are the sugar in water and salt in water, soda water, etc. In solution, all components appear as a single phase.

Learn more about solutions here

https://brainly.com/question/25326161

#SPJ4

Classify these amino acids as acidic, basic, neutral polar, or neutral nonpolar. drag each item to the appropriate bin.

Answers

The classification is:

Basic: ArginineNeutral polar: GlutamineNeutral nonpolar: Alanine

Organic substances known as amino acids have both amino and carboxylic acid functional groups. Only 22 of the hundreds of amino acids found in nature are alpha amino acids, which are by far the most common and make up proteins. Only 22 alpha amino acids are found in the genetic code. Alpha-, beta-, gamma-, or delta-amino acids can be categorized according to where the main structural functional groups are located; further classifications relate to polarity, ionization, and the kind of side chain group (aliphatic, acyclic, aromatic, containing hydroxyl or sulfur, etc.). Amino acid residues are the second-largest component of human muscles and other tissues, behind water, in the form of proteins.

To know more about amino acids refer to https://brainly.com/question/21327676

#SPJ4

Most elements are metals. What is a
physical property of metals?
A. They conduct heat.
B. They are man-made.
C. They float in water.

Answers

Answer:

A. They conduct heat.

Explanation:

A. They conduct heat

If the recommended daily allowance (RDA) for vitamin C is 60 mg per day and there are 70 mg of vitamin C per 100 g of orange, how many 3 oz. oranges would you have to eat each week to meet this requirement?

Please help, I'm terrible with Dimensional Analysis!!

Answers

The number of oranges to be eaten each week to meet the requirement is 7.

How are the RDA calculations done?

Mass of vitamin C is 70 mg.That is it is equal to 0.070 g.

as 1 mg=1×10[tex]^-3[/tex] g. And 60 mg is equal to 0.060 g according to this conversion.

The mass of orange in ounces is given as 3 oz.

As 1 oz=28.3495 g.Therefore,3 oz=(3×28.3495)g

which is equal to 85.045 g.

Given that 100 g orange has 0.070 g of vitamin C.Mass of vitamin C in 85.045 g of oranges is,

                               0.070/100×85.045=0.0595 g

Vitamin C consumed in 1 day is 0.060 g. Therefore in a week vitamin C consumed is 7×0.060=0.42 g.

To calculate the number of oranges to be eaten in a week it is calculated as,

Number of oranges=mass of vitamin C consumed in a week /mass of 3 oz oranges

Number of oranges=0.42 g/0.0595 g

                              =7.05≈7

Therefore,number of oranges to be eaten in a week are 7.

To know more about mathematical conversions click here:

 https://brainly.com/question/11853932

#SPJ1

   

               

6. the molecular weight of potassium chloride (kcl) is 74.55 g/mol. how many grams would you need for 650 ml of a 35 mm solution?

Answers

Mass of potassium chloride (KCl) is 1.7 grams.

M(KCl) = 74.55 g/mol; molar mass of potassium chloride

V(KCl) = 650 ml = 0.65 l; volume of potassium chloride solution

c(KCl) = 35 mM = 0.035 M; concentration of potassium chloride solution

m(KCl) = c(KCl) × V(KCl) × M(KCl)

m(KCl) = 0.035 M × 0.65 l × 74.55 g/mol

m(KCl) = 1.7 g; mass of potassium chloride

Potassium chloride (KCl) is a salt with ionic bond.

Molecular weight is  the sum of the atomic weight values of the atoms in a molecule.

The concentration is the amount of solute that has been dissolved in a given amount solution.

More about concentration: brainly.com/question/4789731

#SPJ4

What organelle surrounds and supports plant cells to give them support and structure?
Group of answer choices

Cell Wall

Nucleus

Cell membrane

Answers

The cell wall (which is made of cellulose)

Answer:Cell membrane

Explanation:Plant cells don’t have cell wall

Complete each row of the table below by filling in the missing prefix or missing exponent.

Answers

The metric prefixes are a follows;

1 ng = 10^-9 g1 dg = 10^-10 g1μg = 10^-6 g1Mg = 10^6 g

What are metric prefixes?

The SI unit is the international system for the measurement of quantities. We  know that the SI system is based on the metric system. The metric system has the units meter, gram and seconds as part of it.

Sometimes we use prefixes to show the magnitude of quantities when we are using the metric system. Let us now try to find the correct prefix or power in the following cases;

1 ng = 10^-9 g1 dg = 10^-10 g1μg = 10^-6 g1Mg = 10^6 g

Learn more about metric prefixes:https://brainly.com/question/2085287

#SPJ1

Select the correct mass for each of the samples described below.

8.32 × 10^20 formula units CaBr2

Answers

Answer:

Explanation:

To determine the mass of each compound, we need to convert them into units of moles first. We use avogadros number to do this and use the molar mass of the compounds to convert to mass.

3.01 × 1023 molecules H2O ( 1 mole / 6.022x10^23 kg) (18.02 g / 1 mole) = 9.01 g

8.32 × 1020 formula units CaBr2 ( 1 mole / 6.022x10^23 kg) (199.89 g / 1 mole) = 0.28 g

1.93 × 1026 molecules XeF6 ( 1 mole / 6.022x10^23 kg) (245.28 g / 1 mole) = 78610.16 g

7. convert 22.7g to μg

Answers

The 22.7 g  in μg ( micro gram )  is 22.7 × [tex]10^{-6}[/tex] .

We need to convert between units in order to ensure accuracy and prevent measurement misinterpretation.

For example , we do not measure a pencil's length in kilometers . In this situation , one must convert from kilometers  ( km ) to centimeters ( cm ) . In most cases, multiplicative conversion factors are used to convert one unit to another of the same quantity .

Sometimes the units of measurement used may not correspond to the standards required for a particular process or application, as well as the measuring choice and convenience. The mass of object in micro gram unit is less than gram .

to learn more about  μg please click here ,

https://brainly.com/question/16630356

#SPJ1

In the mass spectrum of pentane, the presence of a peak with m/z = 57 is most likely to the detection of:?

Answers

In the mass spectrum of pentane, the presence of a peak with m/z = 57 is most likely to the detection of a butyl radical cation.

What does the mass spectrum of pentane look like at the molecular level?

Because all molecular ions fragment, a few compounds have mass spectra that lack a molecular ion peak. That is not a problem you will encounter at A'level. In the mass spectrum of pentane, for example, the heaviest ion has an m/z value of 72.

In pentane, what is the m/z of the fragment ion?

Lines with m/z values one or two lower than one of the simple lines, for example, are frequently caused by the loss of one or more hydrogen atoms during the fragmentation process. The base peak (the tallest peak and thus the most common fragment ion) is at m/z = 57 this time. This, however, is not produced by the same ion as the pentane m/z value peak.

Learn more about the fragmentation process here:-

https://brainly.com/question/26260432

#SPJ4

Does the water testing protocol described in the lab manual involve serial dilution? justify your answer

Answers

Adding different amounts of contaminated water to each tube rather than diluting between tubes. Frequently, county health agencies will assist you with nitrate or bacteria testing. If not, you can ask a state-approved laboratory to test your water. Call the Safe Drinking Water Hotline at 800-426-4791 to locate one in your region.

Tests of the water's quality will reveal information on the condition of the river. The quality of the water might fluctuate over time, and this can be noticed by testing tubes it repeatedly. Temperature, pH, turbidity, salinity, nitrates, and phosphates are just a few of the variables that can be measured.

To learn more about water, click here.

https://brainly.com/question/16630851

#SPJ4

What is the forward rate with continuous compounding for a three-month period starting in one year?

Answers

Answer:8.7%

Explanation:

The forward rate for a three-month period starting in one year is 11.36% per annum.

The forward rate for a specific time period represents the interest rate for borrowing or lending money during that period in the future.

Let's denote:

[tex]r_1[/tex] = Spot rate for one year (annual rate)

[tex]r_2[/tex] = Spot rate for one year and three months (annual rate)

The formula for the forward rate with continuous compounding is given by:

[tex]\[ F = \frac{e^{(r2 * t2)} - e^{(r1 * t1)}}{t2 - t1} \][/tex]

where:

F is the forward rate

[tex]t_1[/tex] is the starting time in years (one year)

[tex]t_2[/tex] is the ending time in years (one year and three months)

Substituting the value

[tex]\[ r_1 = 9.5\% \\r_1 = 0.095)[/tex]

[tex]r_2 = 0.096\\\[ t1 = 1 \text{ year} \][/tex]

[tex]\[ t2 = 1 + \frac{3}{12}[/tex] = 1.25 year back to the formula as

[tex]\[ F = \frac{e^{(0.096 * 1.25)} - e^{(0.095 * 1)}}{1.25 - 1} \][/tex]

[tex]\[ F = \frac{e^{0.12} - e^{0.095}}{0.25} \][/tex]

[tex]\[ F = \dfrac{1.1275 - 1.0991}{0.25} \][/tex]

[tex]\[ F= \dfrac{0.0284}{0.25} \][/tex]

F= 0.1136

Now, convert the forward rate back to percentage:

Forward rate (F) ≈ 0.1136 * 100% = 11.36%

So, the forward rate is 11.36% per annum.

Learn more about Forward rate here:

https://brainly.com/question/34332862

#SPJ7

The missing table attached at the end.

What concentration gradients are established and maintained by the sodium-potassium exchange pump?.

Answers

The concentration of sodium is high outside the cell (extracellular fluid) and the concentration of potassium is high inside the cell (cytoplasm).

Potassium is important for keeping the body hydrated and with sodium support cellular function (sodium-potassium (Na⁺/K⁺) pump).

The sodium-potassium pump releases three Na+ ions, while in the same time two K+ ions exit the cell. For this process one molecule of ATP is consumed.

The sodium and potassium cations move against the concentration gradients.

The sodium-potassium pump keeps a higher concentration of sodium extracellularly and a higher level of potassium intracellularly.

It is very important for many physiological processes in organism.

More about sodium-potassium pump: brainly.com/question/14101500

#SPJ4

4. Manik saw his father watering his garden plants in hot weather. He noticed that
water doesn’t stick to the plant leaves and leaves become dry but looked fresh. He asked

following questions to his teacher

a. Which tissue forms the outer covering of a plant and does it have a protective role

to play?How ?

b. Why does water not stick to the leaves?

Answers

Water does  not stick to the leaves of the plant  owing to the fact that the leaves has a waterproof cuticle.

What tissues protects the leaves?

We know that the leaves are the parts of the plant that are involved in photosynthesis. Photosynthesis is the process by which green plants produce their own food in the presence of sunlight and chlorophyll. We know that the leave has an outer protective covering.

The tissue that plays this outer covering of a plant for is the  epidermis and its waxy cuticle. It prevents damage to the plant.

Water does  not stick to the leaves of the plant  owing to the fact that the leaves has a waterproof cuticle.

Learn more about leaves:https://brainly.com/question/12539285

#SPJ1

A ball-and-stick model of a molecule of formaldehyde, ch2o, is made from the following components: what do the sticks represent?

Answers

In chemistry, the ball-and-stick model is a molecular ideal of a chemical matter which is to expose both the three-dimensional position of the atoms and the bonds among them. The atoms are normally symbolise by spheres, join by rods which shows the bonds.

Formaldehyde forms formaldehyde structure bond it shares double bond with O2 atoms.

Formaldehyde also known as methanol .

Methanol is colourless.

It is flammable.

It is gas at room temperature.

Methanol having pungent odor and it is a volatile organic compounds.

It is made by the composition of Hydrogen, oxygen, and carbons.

To know more about Formaldehyde here :

https://brainly.com/question/14895085?referrer=searchResults

#SPJ4

What is the state of hybridization of the central 0 atom in 03? describe the bonding in 03 in terms of delocalized molecular orbitals.

Answers

The hybridization of O in ozone molecule [tex]O_3[/tex] is [tex]sp^{2}[/tex]

The bond angle of ozone is 117.5° which is close to 120° , thus it show trigonal planar geometry and is [tex]sp^{2}[/tex] hybridized.

Bonding of oxygen in ozone can be stated as

Three sets of [tex]sp^{2}[/tex]  hybrid orbital overlap to produce two [tex]O-O[/tex] σ bonds and five lone pair of electrons , two on both side oxygen atom and one pair on central atom.

The π bonding is formed by unhybridized [tex]2p_z[/tex] orbital on every oxygen atom . This π bonding is delocalized over all three oxygen atoms of ozone molecule.

To know more about ozone molecule

https://brainly.com/question/25180993

#SPJ4

10. Stephen is worried he has a fever. His dad is a scientist though, and only has a thermometer
that measures in Kelvin, and it measures Stephen's temperature to be 312 Kelvin. If Stephen's
temperature is above 100°F, he isn't allowed to go to school. Can Stephen go to school today?

Answers

To get temperature in Celsius: temperature in Kelvin - 273.15: degrees C=312-273.15= 38.85
To get farenheit from Celsius: (9/5degrees C) + 32 = 104.93.
Stephen cannot go to school today and his dad should probably call the doctor for that high fever
Other Questions
A ________ is a website that allows multiple users to create and edit pages collaboratively. To prevent the accumulation of hormones in our bodies, the hormones are constantly being metabolized and excreted. where are adrenal and gonadal steroid hormones excreted? why did luther ultimately deny? what did he have to say about priesthood? at the risk of seeming boring or monotonous, properties will still be at their highest value if the neighborhood exhibits 1. a requested task is subject to be reported when: requesting for a screenshot when it is asking for 3 proofs when it contain an expired offer when it requests for an app to be tested alista is struggling to balance her home life, part-time job, and school work. Her grades have begun to slip, and she is considering dropping out completely in order to work full time. What advice would you give Calista? The order in which a ratio is written is _____ to the meaning. A frequency distribution in which there are too few scores at the extremes of the distribution said to be:_____. I love to explore and travel. When traveling and exploring, I learn a lot of super coolthings. I have been to a lot of places over the states never outside of the U.S Here's whathappened!My cousin wanted to get married in cali. The family went to cali to celibate his newmarriage. It was mostly all of my 1st cousins' then a few of 2nd and 3rd cousins came too. Mymom, dad, brother Nate, and sister Anna all flew Delta so did my 1st cousin. Some of my otherfamily members flew different airlines. My mom, dad, brother, and sister were the only ones indelta sky lounge. It's another level at the DTW which they sever us drinks, food, and severs withall our needs. We get to the airport always a few hours earlier so that we can enjoy that luxury.The fight was four hours and 10 minute long. We got severed cinnamon crackers, water, popsand sun chips. I really love salty snacks and I asked the flight attendant in Make a list of at least three specific details about the wallpaper, as described by the narrator, and determine how these details shape the central idea. Please help me In the context of the physiological effects of nicotine, nicotine mimics blank______ by acting at several nicotinic subtypes of cholinergic receptor site. The nerve cell stage in which potassium returns to the inside of the cell and sodium returns to the outside of the cell is called what? Just+paid+a+dividend+of+$1+and+it+is+expected+to+increase+its+dividend+by+2%+per+year.+if+the+market+requires+a+return+of+15%+on+assets+of+this+risk+level,+how+much+should+the+stock+be+selling+for? nobody speaks the truth ......? (question tag) Find four relations from {a, b} to {x, y} that are not func- tions from {a, b} to {x, y}. Which finding is most important for the nurse to confirm prior to hanging an intravenous (iv) bag containing potassium? The price of a product increases by 15 nd its price elasticity of demand is 3. what is the change in quantity demanded? whats 9 and 4 exponent time negative 1/3 and 4 exponent? Economists reason that the optimal decision is to continue any activity up to the point where the. 3. If a = -2 and b = 6, find the value of each of thefollowing.ii) 6a - bi) 2a + biii) 3a - 26v) a +3abiv) 4abvi) a + b