[tex]\\ \sf\longmapsto Force=ma=250(10)=2500N[/tex]
Area=150cm^2=0.015m^2[tex]\\ \sf\longmapsto Pressure=\dfrac{Force}{Area}[/tex]
[tex]\\ \sf\longmapsto Pressure=\dfrac{2500}{0.015}=1.6666.6Pa[/tex]
What is the initial velocity of a moose who
accelerates uniformly at 1.5 m/s/s for 5 seconds and
finishes with a velocity of 7 m/s?
Answer:
- 0.5 m/s
Explanation:
(1) Acceleration = change in velocity / time
(2) Change in velocity = (Final velocity - Initial velocity)
We know:
acceleration = 1.5 m/s/s
time = 5 seconds
final velocity = 7 m/s
x = initial velocity)
1.5 = ( 7 - x ) / 5
1.5 x 5 = ( 7 - x )
7.5 = 7 - x
x = -0.5 m/s
You can check the answer by plugging in the values to equation (1).
will give correct answer brainliest
Which factors below will increase the momentum of a rolling ball of constant mass m? (Select only the answers that will increase the momentum of the ball.) Moving from a flat surface to moving downhill. Colliding with a ball of much lower mass moving in the opposite direction of the ball. A moving object traveling in the same direction as the ball colliding with it. Rolling uphill onto an inclined surface. Rolling onto a surface with high amounts of friction with the ball.
In order to increase the momentum of the ball, you have to increase its speed.
The first and third choices on the list ('A' and 'C') will do that.
The factors that will increase momentum of a rolling ball are:
A. Moving from a flat surface to moving downhill.
C. A moving object traveling in the same direction as the ball colliding with it.
Factors that increase momentum:The gravitational power of the Earth ready makes the ball speed up, and in this manner pick up speed.
If you increase either mass or velocity, the momentum of the object increases proportionally.
Thus, the factors that increase the momentum of a rolling ball are
A. Moving from a flat surface to moving downhill.
C. A moving object traveling in the same direction as the ball colliding with it.
Find more information about momentum here:
brainly.com/question/402617
Newton's second law of motion gives the .............
definition of force
unit of force
nature of force
none of the above
Answer:
definition of force
Explanation:
It states that "the rate of change in momentum is proprtional to the force applied"
[tex]{ \rm{momentum = mass \times velocity}} \\ [/tex]
• from the law stated:
[tex]{ \rm{ \frac{ \delta momentum}{time} = force}} \\ \\ { \rm{ \frac{mv - mu}{time} = force}} \\ \\ { \rm{ \frac{mass(v - u)}{time} = force}} \\ \\ { \rm{mass \times \frac{(v - u)}{time} = force }}[/tex]
• from first newton equation:
[tex]{ \boxed{ \tt{ \frac{v - u}{t} = acceleration}}} \\ [/tex]
• therefore
[tex]{ \rm{mass \times acceleration = force}} \\ \\ { \boxed{ \rm{force = mass \times acceleration}}}[/tex]
v is final velocityu is initial velocityt is timeA pugdoodle runs 120 meters
in 18 seconds. What was its
speed?
Answer:
6.66666 sec/m or 6 2/3 sec/m
Answer:
6.67 meters per second
Explanation:
120/18=6.67 meters per second
A cat falls from a table of height 1.3 m. What is the impact speed of the cat?
O A. 7.5 m/s
O B. 2.5 m/s
O C. 5.0 m/s
O D. 25.5 m/s
SUBMIT
The impact speed will be
v^2 = 2*9.8*1.3
v^2 = 25.48
v= 5.04 m/s or O C. 5.0 m/s
Volcanic Island Arcs, such as Japan, form when a(n) __________ plate is subducted below a(n) _________________ and takes seawater with it. A rock and water mixture will break through the crust.
Volcanic Island arcs form when an oceanic tectonic plate is subducted below a tectonic plate taking seawater with it.
Volcanic island arcs occur offshore during volcanoes. They occur due to the subduction of an oceanic plate under another tectonic plate. Volcanic Island arcs occur mostly in ocean basins.
Due to the subduction of oceanic plates under tectonic plates, Island Arcs are found, mostly along the margins of continent.
Hence we can conclude that Volcanic Island arcs Form when an oceanic tectonic plate is subducted below a tectonic plate taking seawater with it.
Learn more : https://brainly.com/question/18662349
why do we need to know physical and chemical change?
It is important to understand the differences between physical and chemical changes. ... It helps to think of physical changes as those involving changes that don't change the make up of the substance, while chemical changes are those that create a new substance. Physical Changes involve energy.
The answer is 84N, but what is the mass and weight calculation?
Answer:
weight= density ×volume× 9.8
mass=density×volume
Explanation:
[tex]weight = 0.12 \times 0.04 \times 0.04 \times 3.14 \times 13600 \\ \times 9.8 = 80.351 \: n \\ \\ mass = 0.12 \times 0.04 \times 0.4 \times 3.14 \times 13600 = \\ = 8.199 \: kg[/tex]
what is the difference between true north and magnetic north called?
true North is fixed point on the globe
magnetic North is the direction that a compass needle points to as it aligns with the earths magnetic field and what is interesting is that the magnetic North pole shifts and changes over time in response to change in the earth's magnetic core
The table describes the properties of four compounds.
Which compounds are most likely ionic?
compounds A and B
compounds B and C
compounds C and D
compounds D and A
The characteristics of the ionic bonds allows to find the results for the question about which compound are ionic is:
d) Compounds D and A.
Chemical compounds are formed by atoms linked by electrostatic forces, where one of the elements gave up some electrons and the other element acquired these electrons, the two atoms being in an ionic state, consequently the bond is strong and has several characteristics:
High melting point. It dissolves in polar solvent (water). In general they are hard and brittle solids (NaCl). In solution they are conductors of electricity.
In these characteristics, let's analyze the compounds in the table.
With the property of high melting point the compounds A and D can be ionic. According to the dissolution property all could be ionic. According to the conduction property of electricity, compounds A and D can be ionic
Let's review the different alternatives:
a) False. Compound A and B has a low melting point.
b) False. The B and C compounds have low melting points.
c) False. Compound C has a low melting point.
d) True. The two compounds meet all the characteristics of ionic compounds.
In conclusion with the characteristics of the ionic bonds we can find the results for the question about which compound are ionic is:
d) Compounds D and A are ionics.
Learn more about ionic bonding here: brainly.com/question/13526463
Define the words offense and defense in flag football
Answer: I believe offense is the attacking team and defense is the defending team
Source: I just peeked at dad watching football
15. What is velocity, and how is it useful for describing an object's motion?
Velocity describes motion by indicating how fastan object moves and in what direction. Speed is a magnitude of velocity, which indicates only how fast an object moves. Speed shows how much distance is traversed in a given interval of time: In a general case of motion,.
make a island with all renewable energy soursws and how it works and about it but at year 9 level
Answer:
How are we expected to make an island
what is magnetic force?
i
Answer:
The force by which a substance (magnet) attracts a body(metals) towards it is called magnetic force
Answer:
Magnetic force, attraction or repulsion that arises between electrically charged particles because of their motion. The magnetic force between two moving charges may be described as the effect exerted upon either charge by a magnetic field created by the other.
Explanation:
Hope this helps you. Please mark as brainliest. It helps a lot. :)
farmer joe drives a tractor for 4 hours. his tractor is pulling a heavy plow across a rocky field. over the course of 4 hours, is the plow gaining or losing energy?
Over the course of the 4 hours for which farmer Joe's tractor is pulling the heavy plow, the plow is gaining energy by virtue of its displacement --termed the Kinetic energy.
According to the question, Farmer Joe drives the tractor for 4 hours.
However, the tractor is connected to a heavy plow and is used to pull the plow across a rocky field.
The question requires that we determine if the plow is gaining or losing energy.
In the plow's state of rest, prior to when it is connected to the tractor and pulled by the tractor; the plow possess a form of energy by virtue of its position termed the Potential energy.However, the focus of the question is during the pulling action of the tractor on the plow.
As such, the plow now has a kinetic energy by virtue of its displacement..Ultimately, the plow is gaining energy as it is being pulled by the tractor and now has Kinetic energy.
Read more:
https://brainly.com/question/15879747
what is another name for the magnitude of the velocity vector
Answer:dddddddddddddddddddd
Explanation:
sometimes when a chemical change ----------- occurs of a substance will change
shape
color
size
mass
Answer:
Chemical changes occur when a substance combines with another to form
Explanation:
Chemical changes occur when a substance combines with another to form a new substance, called chemical synthesis or, alternatively, chemical decomposition into two or more different substances. These processes are called chemical reactions and, in general, are not reversible except by further chemical reactions.
An object is traveling at a constant velocity of 8 m/s when it experiences a constant acceleration of 3.5 m/s2 for a time of 40 s. What will its velocity be after that acceleration? *
Answer:
140 m/s
Explanation:
v = u + at
v = 8 + 3.5(40) = 140 + 8 = 140
A person travels 350 km at an average speed of 60 km/hr. How long did it take?
Answer: 5.8 hours
Explanation:
Time= distance divided by speed, so:
350 divided by 60= 5.8 hours
Sound is caused by:
Air
Electricity
Force
Vibrations
sound is caused by vibrations
Answer:
Vibrations
Explanation:
Sounds are produced by vibrations.
Sound travels as waves, which in turn create other particles to vibrate creating vibrating particles and change sound.
Sound waves are reflected by surfaces.
The brakes are slammed on a speeding truck and it skids to a stop. If the truck were heavily loaded so it had twice the total mass, the skidding distance would be...
A) the same
B) one and one-half times as far
C) twice as far
D) four times as far
Explain your answer
Answer:
twice more but I have to make it 20 characters so h8 how u doing I hear yelling outside my room and exstasional dread in my head
If the mass of the truck is doubled, the force of friction is doubled, and the skidding distance is doubled.
Hence, the correct option is C.
The skidding distance is proportional to the mass of the truck. If the truck is heavily loaded so it has twice the total mass, the skidding distance will be twice as far.
This is because the force of friction is proportional to the normal force, which is in turn proportional to the mass of the truck. The greater the mass of the truck, the greater the force of friction, and the longer the skidding distance.
In equation form, the skidding distance is given by:
s = μ * d / f
where:
s is the skidding distance
μ is the coefficient of friction
d is the distance traveled before the truck stops
f is the force of friction
The force of friction is given by:
f = μ * mg
where:
m is the mass of the truck
g is the acceleration due to gravity
Therefore, If the mass of the truck is doubled, the force of friction is doubled, and the skidding distance is doubled.
Hence, the correct option is C.
To know more about distance here
https://brainly.com/question/34779919
#SPJ3
Four different blocks are resting on the floor. They each have a different mass, and they are each made of a different material, so the coefficients of friction are not the same. Using the information in the table below, rank, from highest to lowest, the magnitude of the maximum horizontal force
To answer this question, it is necessary to apply the static condition from Newton´s Laws
The solution is:
Fd > Fc > Fa > Fb
From the body free diagram, and from the second Newton´s law of movement we get:
∑ Fx = 0 F - Fr = 0 F = Fr Fr = μ×N
∑ Fy = 0 N = m×g ⇒ Therefore Fr = μ×m×g
F = μ×m×g g is the same in all the cases, then we just compare the products μ×m
So when F is just greater than Fr, the body will start moving
we make a table, with values from the information table.
1.- μ×m = 0.5× 40 = 20
2.-μ×m = 0.4× 80 = 16
3.- μ×m = 0.7× 30 = 21
4.- μ×m = 0.9× 35 = 31.5
According to the table, from highest to lowest the magnitude of the horizontal force is:
Fd > Fc > Fa > Fb
RelatedLink: https://brainly.com/question/16799228
How is air resistance similar to gravity? give me two reasons
Explanation:
I think this would help you. Read this and make your own answer ok.
Describe how energy is transferred in one of the sequences.
Answer:
Energy transfer describes the changes in energy (a state function) that occur between organisms within an ecosystem. ... A food chain is a sequence of organisms that are connected by their feeding and productivity relationships; a food web is the interconnected set of many food chains. Energy transfer is a one-way process.
Mark me as the brainlist
I know that the answer is 20, but I don’t know if it’s B or D. Please help
No links
Answer:
d makes the most sense sorry if it is wrong
Which of the following accurately describes circuits? Question 5 options: A) In a series circuit, the amount of current passing through each part of the circuit may vary. B) In a parallel circuit, the same amount of current flows through each part of the circuit. C) In a series circuit, the current can flow through only one path from start to finish. D) In a parallel circuit, there's only one path for the current to travel.
Answer:
The Answer would be C
In a series circuit , the current can only flow through only one path from start to finisb
one sports where it would be good to have long thick bones , explain your answer
Answer:
Marathon/Long distance running, swimming, etc
6. An object has a volume 30ml and a mass of 30g. What is the density
Answer:
1 g/mLExplanation:
The density of a substance can be found by using the formula
[tex]density = \frac{mass}{volume} \\[/tex]
From the question
mass = 30 g
volume = 30 mL
We have
[tex]density = \frac{30}{30} = 1 \\ [/tex]
We have the final answer as
1 g/mLHope this helps you
Freud was an influential and controversial psychologist who believed that psychology should study the unconscious mind. Describe
the two books Freud published in the early 1900s. (Site 2)
Answer:
The Interpretation of Dreams": Freud noticed that dreams played an important role in his analysis of neurotic and "hysterical" patients. When he asked his patients to talk about whatever came into their minds, they often referred to their dreams, which would set off other associations and often illuminate other important connections in their past experience. It took Freud about two years to write the book, finishing it in September 1897.
PLS HELP 15 PNTS AND BRAINLSIT FOR CORRECT ASNWER PLSSSS HELP MEEE
