which is a good description of kinetic energy?(1 point) responses stored energy stored energy energy from the sun energy from the sun conserved energy conserved energy energy of motion

Different substances also have different specific heat capacities, which is the amount of energy needed to increase the temperature of an object by a certain amount.

Specific heat is defined as the amount of heat energy required to raise the temperature of one unit of mass of a substance by one degree Celsius (or one Kelvin). It is a physical property that depends on the chemical composition and molecular structure of the substance. Substances with a high specific heat capacity require more heat energy to increase their temperature than substances with a low specific heat capacity. For example, water has a very high specific heat capacity, which means that it takes a large amount of heat energy to raise its temperature by even a small amount. This is why water is often used as a coolant in industrial processes, as it can absorb a large amount of heat without increasing in temperature significantly. On the other hand, metals have low specific heat capacities, which means that they require relatively less heat energy to increase their temperature. This is why metals are often used in cooking utensils, as they can be quickly heated up and used to cook food. Specific heat is an important property in various fields of science and engineering, as it affects the way heat is transferred between different substances, such as in thermal insulation, heating and cooling systems, and chemical reactions.

In summary, specific heat capacity is a property of a substance that determines the amount of heat energy needed to increase the temperature of the substance by a certain amount. Different substances have different specific heat capacities due to differences in their chemical composition and molecular structure.

To know more about energy please refer: https://brainly.com/question/26472013

#SPJ4

When a boxer is moving away from a punch, the force experienced is reduced because C) increased.

The force created when things collide is known as the force of impact. The impact or hitting power of your vehicle increases as you increase your speed. The force of impact rises with the square of the increase in speed, according to the rules of physics.

When you throw a punch, you'll apply force to the target by using the momentum that was built during the action and the addition of the snap. This results in impulse (force x time). You may transfer a lot of impulse to the target area and build momentum if you do so.

Therefore, option C is correct.

Learn more about force at:

https://brainly.com/question/12970081

#SPJ1

missing options

A) no different, but the timing is different

B) decreased

C) increased

D) all of the above

Assuming that the drag force is proportional to the velocity, the dragster will travel approximately 392 meters during the 4-second interval.

To find the value of the drag coefficient k, we can use the following formula:

F = kv

where F is the drag force, k is the drag coefficient, and v is the velocity of the dragster.

At the initial velocity of 220 mph, the drag force is given by:

F₁ = kv₁

where v₁ is the initial velocity of 220 mph. Similarly, at the final velocity of 50 mph, the drag force is given by:

F₂ = kv₂

where v₂ is the final velocity of 50 mph.

During the 4-second interval, the average velocity of the dragster is:

vavg = (v₁ + v₂)/2 = (220 mph + 50 mph)/2 = 135 mph

Converting to SI units:

vavg = 60.54 m/s

The change in velocity during the 4-second interval is:

Δv = v₂ - v₁ = 50 mph - 220 mph = -170 mph

Converting to SI units:

Δv = -76.02 m/s

The acceleration of the dragster during the 4-second interval is:

a = Δv/t = (-76.02 m/s)/4 s = -19.01 m/s²

The drag force acting on the dragster is:

F = ma

where m is the mass of the dragster, which is given as 3000 lb, or 1360.78 kg (converting to SI units). Substituting the given values, we get:

F = (1360.78 kg)(-19.01 m/s²) = -25,874.8 N

At the initial velocity of 220 mph, the drag force is:

F₁ = kv₁ = k(220 mph) = 97.97 kN

Similarly, at the final velocity of 50 mph, the drag force is:

F₂ = kv₂ = k(50 mph) = 22.37 kN

Using the given information, we can set up the following system of equations:

F₁ - F₂ = -25,874.8 N

(97.97 kN) - (22.37 kN) = -25,874.8 N

Solving for k, we get:

k = (-25,874.8 N)/(170 mph) = (-25,874.8 N)/(76.02 m/s) ≈ -340.83 Ns²/m

Therefore, the drag coefficient k that is needed to reduce the speed of the dragster from 220 mph to 50 mph in 4 seconds is approximately -340.83 Ns²/m.

To find how far the dragster will travel in the 4-second interval, we can use the formula for distance traveled under constant acceleration:

d = vi × t + (1/2)at²

where vi is the initial velocity, t is the time interval, a is the acceleration, and d is the distance traveled.

Substituting the given values, we get:

d = (220 mph)(4 s) + (1/2)(-19.01 m/s²)(4 s)²

Converting the initial velocity to SI units:

d = (98.10 m/s)(4 s) + (1/2)(-19.01 m/s²)(16 s²) ≈ 392 m

Learn more about force here: brainly.com/question/12970081

#SPJ4

It is made up of three pieces that are closely packed together. Particles from one of outside parts are pumped all around circuit onto the second outer layer.

Because of this, the capacitor is occasionally referred to as the capacitor. A passive element is known as a capacitor because it can store more electric power than a comparable element when employed as an insulator and insulated conductor.

The capacitor symbol must show the construction of the capacitor as two lines, either flat and curved, close but not touching.

To know more about circuit visit:

https://brainly.com/question/27206933

#SPJ1

The force that your bottom is pushing against the chair is called the "action force."

The action force is equal and opposite to the "reaction force" that the chair is pushing back against your bottom. This is known as Newton's Third Law of Motion, which states that for every action, there is an equal and opposite reaction.

So, when you are sitting in a chair, your bottom is pushing against the chair with a certain amount of force, and the chair is pushing back against your bottom with the same amount of force. This is why you are able to sit in the chair without falling through it.

here you can find an example of Newton's third law

https://brainly.com/question/7828983

#SPJ11

The conversion factor between square centimeters ([tex]cm^2[/tex]) and square meters ([tex]m^2[/tex]) is [tex]0.0001 m^2/cm^2.[/tex]

to convert a given area from square centimeters to square meters, you need to multiply it by 0.0001, and to convert it from square meters to square centimeters, you need to multiply it by 10,000.

This conversion factor is derived from the fact that there are 100 centimeters in a meter, and the conversion from one unit to another involves squaring the length measurement. This means that the conversion factor between the area in square centimeters and square meters is [tex](1 cm / 100 cm)^2[/tex] = [tex]0.0001 m^2/cm^2[/tex].

It's important to be able to convert between different units of area, as different applications may require different units. For example, when measuring the area of a small object, square centimeters may be a more appropriate unit, while for larger areas, square meters may be more suitable.

Learn more about conversion factor here:

https://brainly.com/question/23718955

#SPJ4

The maximum torque on a 150-turn square loop of wire 18.0 cm on a side that carries a 36.4 a current in a 1.60 t field is 283.04 N m.

1) torque on the loop will be :

T = N*I*L^2*B*sin(90)

T = 150*36.4*0.18*0.18*1.6

T = 283.04 N m

2) T = 283.04*sin(10.9)

T = 53.52 Nm

3) I = T/N*area*B

I = 9/36.4*3.14*0.364*0.364*0.8

I = 0.082 A

Current = 0.082 A

Necklace is the rotational fellow of direct force.( 1) It's also appertained to as the moment of force( also shortened to moment). It represents the capability of a force to produce change in the rotational stir of the body.

The conception began with the studies by Archimedes of the operation of regulators, which is reflected in his notorious quotation" Give me a switch and a place to stand and I'll move the Earth". Just as a direct force is a drive or a pull, a necklace can be allowed of as a twist to an object around a specific axis.

Learn more about Maximum torque:

https://brainly.com/question/29492855

#SPJ4

Allison's speed at the lowest point in the trajectory is 6.41 m/s.

A mass-moving object's route through space as a function of time is known as its trajectory or flight path.

The potential energy at the highest point is given by:

PE = mgh = (14 kg)(9.8 [tex]m/s^2[/tex])(1.8 m)(cos 26°) = 237.5 J

Where h is the height above the lowest point.

At the lowest point, all of the potential energy is converted to kinetic energy, so:

KE = PE = 237.5 J

The kinetic energy is given by:

KE = (1/2)[tex]mv^2[/tex]

where v is the speed at the lowest point. Solving for v, we get:

v = sqrt(2KE/m) = sqrt(2(237.5 J)/(14 kg)) = 6.41 m/s

Thus, 6.41 m/s. Allison's speed at the lowest point in the trajectory.

For more details regarding trajectory, visit:

https://brainly.com/question/28874076

#SPJ9

The statement "If a researcher measures two individuals on an ordinal scale, it is possible to determine which individual has the larger score" is false.

An ordinal scale is a type of measurement scale that allows for the ranking of individuals or objects based on a specific characteristic or trait. For example, if a researcher is measuring the level of pain experienced by two individuals, they may use an ordinal scale with categories such as "no pain," "mild pain," "moderate pain," and "severe pain." The individual who falls into the "severe pain" category would have a larger score than the individual in the "mild pain" category. Therefore, it is possible to determine which individual has the larger score when using an ordinal scale.

Learn more about ordinal scales at https://brainly.com/question/15998581

#SPJ11

The charge that must transfer for object A to gone positively charged is the negative charge in object A.

The physical characteristic of matter that causes it to feel a force when exposed to an electromagnetic field is called electric charge.

The two types of electric charges that protons and electrons most frequently carry are positive and negative charges. Charge movement is what produces energy.

An object can either be negatively charged or positively charged. An object is positively charged when it includes more protons than electron.

Thus, for object A to be positively charged, the charge that must shift for object A to become positively charged is the negative charge.

Learn more about charge here:

brainly.com/question/14701820

#SPJ9

Your question is incomplete, most probably your question was as below, and missing part is attach in image below.

Select the correct location on the image.

Objects A and B are brought close to each other. Object A will soon become positively charged. Identify the charge that must transfer for this situation to occur.

+

A

B

The width of the wooden block measured by the vernier caliper is 0.74 cm.

The width of the wooden block measured by the vernier caliper is calculated as follows;

Width of the wooden block = main scale reading + vernier scale reading

The main scale reading = 0.7 cm

The vernier scale reading ( point of alignment ) = ( 0.4 cm / 10 ) = 0.04 cm

The width of the wooden block measured by the vernier caliper is calculated as follows;

Width of the wooden block = 0.7 cm + 0.04 cm

Width of the wooden block = 0.74 cm

Learn more about vernier caliper here: https://brainly.com/question/24694454

#SPJ1

If speed of particle triples, the kinetic energy will be times six (6).

Kinetic energy is the energy possessed by an object because of its motion, equal (nonrelativistically) to one half the mass of the body times the square of its speed.

The kinetic energy of a moving object is directly proportional to its mass and directly proportional to the square of its velocity.

This means that an object with twice the mass and equal speed will have twice the kinetic energy while an object with equal mass and twice the speed will have quadruple the kinetic energy.

Therefore, an object with triple speed will have times six kinetic energy.

Learn more about kinetic energy at: https://brainly.com/question/26472013

#SPJ1

Answer: Approximately 6.67 meters per second.

Explanation:

Speed is a quantity measured in meters per second, so because the elapsed time is 5 minutes, let's turn it into seconds. 5 minutes multiplied by 60 seconds is 300 seconds.

2000 meters divided by 300 seconds is about 6.67 meters per second, which is the speed.

An airplane flies 170km in 15 min  in the given case.

To find the average speed, we divide the total distance by the time taken:

Average. speed = Total distance / Time taken

In this case, the total distance is 170 km and the time taken is 15 min. However, it's more common to express speed in km/hr, so we need to convert 15 min to hours:

15 min = 15/60 = 0.25 hours

Now we can calculate the average speed:

Avg. speed = 170 km / 0.25 hours = 680 km/hr

Therefore, the average speed of the airplane is 680 km/hr.

Q1b. Sarah rides her horse with a constant speed of 20 km/hr. How far can she travel in 4 hours?

To find the distance Sarah can travel in 4 hours, we multiply her speed by the time:

Distance = Speed x Time

In this case, Sarah's speed is 20 km/hr and the time is 4 hours, so:

Distance = 20 km/hr x 4 hours = 80 km

Therefore, Sarah can travel 80 km in 4 hours on her horse.

Q2a. An airplane flies at a constant speed of 780 miles per hour. How long will it take to travel a distance of 2635 miles?

To find the time it takes the airplane to travel a distance of 2635 miles, we divide the distance by the speed:

Time = Distance / Speed

In this case, the distance is 2635 miles and the speed is 780 miles per hour, so:

Time = 2635 miles / 780 miles per hour ≈ 3.38 hours

Therefore, it will take the airplane approximately 3.38 hours to travel a distance of 2635 miles at a constant speed of 780 miles per hour.

Q2b. An airplane flies at a constant speed of 540 miles per hour. How long will it take to travel a distance of 2160 miles?

To find the time it takes the airplane to travel a distance of 2160 miles, we divide the distance by the speed:

Time = Distance / Speed

In this case, the distance is 2160 miles and the speed is 540 miles per hour, so:

Time = 2160 miles / 540 miles per hour = 4 hours

Therefore, it will take the airplane 4 hours to travel a distance of 2160 miles at a constant speed of 540 miles per hour.

To know more about average speed, visit:

brainly.com/question/12322912

#SPJ1

The two types of forces that act on a fluid element is body forces and surface forces.

A body force is a force that acts throughout the volume of a body.( 1) Forces due to graveness, electric fields and glamorous fields are exemplifications of body forces. Body forces discrepancy with contact forces or face forces which are wielded to the face of an object.

Normal forces and shear forces between objects are superficial forces as they're wielded to the face of an object. All cohesive face magnet and contact forces between objects are also considered as face forces.

Face force denoted fs is the force that acts across an internal or external face element in a material body. face force can be perished into two vertical factors normal forces and shear forces. A normal force acts typically over an area and a shear force acts parenthetically over an area.

Learn more about Types of forces:

https://brainly.com/question/14605998

#SPJ4

The suitcase is dragged approximately 0.58 meters before it is riding smoothly on the conveyor belt.

Drag force is a force that resists the motion of an object through a fluid (such as air or water) due to the frictional forces between the object's surface and the fluid.

Here,

The initial velocity of the suitcase is zero since it was dropped from rest. The suitcase will accelerate until the kinetic friction force between it and the conveyor belt matches the force of gravity acting on it, resulting in a constant velocity. We can use the following equation to find the distance traveled by the suitcase until it reaches a constant velocity:

[tex]d = (v_f^2 - v_i^2) / (2 * \mu* g)[/tex]

We know the final velocity of the suitcase is 1.5 m/s, the coefficient of kinetic friction is 0.20, and g is 9.81 m/s^2. Substituting these values into the equation, we get:

[tex]d = (1.5^2 - 0) / (2 * 0.20 * 9.81)[/tex]
d ≈ 0.58 meters

Therefore, the suitcase is dragged approximately 0.58 meters before it is riding smoothly on the conveyor belt.

Learn more about drag force here:

https://brainly.com/question/12774964
#SPJ1

As the electric field gets stronger, the distance between equipotential lines decreases.

Equipotential lines are hypothetical paths through space that link places with an identical electric potential. Equipotential lines, then, are a group of electric field sites where the electric potential is constant. These lines enable a way to see and comprehend the electric field in a specific area because they are always perpendicular to the electric field lines at every point.

In several branches of physics, including electrostatics, electromagnetism, and quantum mechanics, equipotential lines are helpful. They are used to explain and comprehend how charged particles and electric fields behave.

To know more about Equipotential lines visit:

https://brainly.com/question/13266693

#SPJ4

Needle will be pushed away form the magnet if the compass was kept at the same distance, but moved to the other end of the magnet

When the magnetic field of the bar magnet intercepts the magnetic field of the compass needle, the compass needle deflects because it encounters a distinct magnetic field.

Needle of the magnetic compass is deflected when a bar magnet is brought up to a magnetic compass. As the north pole of the magnet is brought close to the compass, the needle's south side is drawn to it. Needle will be pushed away form the magnet if the compass was kept at the same distance, but moved to the other end of the magnet.

To know more about the magnetic compass, here

brainly.com/question/22964998

#SPJ4

Ratio of the final to the initial linear charge density is cubed, and for electric force before and after shrinking ratio is equal to that of charge density.

When a segment of wire is shrunk to one-third of its original length, the ratio of the final to the initial linear charge density ( ) is cubed. In other words.

The electric force on a proton located far from the wire is proportional to the linear charge density of the wire. So, if the linear charge density decreases (as it does when the wire is shrunk), the electric force on the proton also decreases. The ratio of the electric force on the proton after the segment is shrunk to the force before the segment was shrunk is equal to the ratio of the linear charge densities: .

If the original segment of wire is stretched to 10 times its original length, then the linear charge density will decrease to one-tenth of its original value. To keep the linear charge density unchanged, an amount of charge equal to ten times the original charge must be added to the wire. This is because the linear charge density is proportional to the total charge on the wire and inversely proportional to the length of the wire.

In conclusion, when a segment of wire is shrunk or stretched, the linear charge density changes, which in turn affects the electric force on a proton located far from the wire. To keep the linear charge density unchanged, the total charge on the wire must be adjusted accordingly.

Learn more about ratio here:

https://brainly.com/question/16038544

#SPJ4

The frequency of System 1 is highest, followed by System 2, and finally System 3.

The equation: gives the frequency of an oscillating system.

f = (1 / 2π) * √(k / m)

When the mass is m, the spring constant is k, and the frequency is f.

Each mass is dragged down an additional 1 cm before being released, so the oscillation amplitude is the same for all of the masses.

The square root of the spring constant is directly proportional to an oscillating system's frequency, while the square root of the mass is inversely proportional.

As a result, the system with the greatest frequency also has the largest spring constant and lowest mass.

We shall compare the masses since, based on the available data, we are unable to tell which system has the largest spring constant.

m1 Equals 0.5 kg in System 1.

System 2: 0.8 kg/m2

System 3: 1.2 kg/m3

We can determine the frequencies of each system using the frequency formula:

f1 = (1 / 2)*(k / m1), f2*(k / m2)*(k / m3), and f3*(1 / 2)*(k / m3)

We can compare the frequencies by looking at the mass terms because the spring constant is the same for all three systems:

F1 = 1/M1 = 1/0.5 = 1.414 F2 = 1/M2 = 1/M8 = 1.118 F3 = 1/M3 = 1/M2 = 1/M3 = 0.912

System 1 therefore operates at the greatest frequency, followed by systems 2 and 3.

For Such more questions on Frequency

https://brainly.com/question/254161

#SPJ4

0.68 m/s² is the magnitude of the acceleration of a skydiver who is currently falling at one-half his eventual terminal speed.

The terminal speed of a skydiver is the maximum velocity that the skydiver reaches in freefall, where the net force acting on the skydiver is equal to zero. The terminal speed is determined by the balance between the gravitational force acting on the skydiver and the air resistance force acting on the skydiver. The acceleration of a skydiver who is currently falling at one-half his eventual terminal speed can be calculated using the equation for the net force acting on the skydiver:

[tex]F net = ma[/tex],

here,

m is mass of the skydiver,

a is acceleration.

Since, the net force is equal to zero at terminal speed, we can calculate the air resistance force at one-half the terminal speed and equate it to the gravitational force to find the acceleration. The air resistance force is proportional to the square of the velocity, so at one-half the terminal speed, the air resistance force is proportional to one-fourth of the terminal speed squared.

Let's call the terminal speed Vt and the skydiver's velocity at one-half the terminal speed V/2:-

[tex]F gravity = m * g[/tex],

here, g is acceleration due gravity (9.8 m/s^2).

[tex]F air = -k * V^2[/tex],

here, k constant that depends on the skydiver's body shape, size, and surface area.

At terminal speed, net force is zero:-

[tex]m * g = -k * Vt^2[/tex]

At one-half the terminal speed, the air resistance force is proportional to one-fourth of the terminal speed squared:-

[tex]F air = -(k/4) * Vt^2 = -(k/4) * (V/2)^2[/tex]

The gravitational force is unchanged:-

[tex]F net = m * g + Fair[/tex]

Reversing in the values:-

[tex]m * g = m * g + (-k/4) * (V/2)^2[/tex]

Rearranging the eq.:

[tex](k/4) * (V/2)^2 = m * g[/tex]

Dividing both sides by m:-

[tex](k/4) * (V/2)^2 / m = g[/tex]

[tex](V/2) / \sqrt{((k/4) / m)} = \sqrt{(g)}[/tex]

Finally, dividing both sides by (V/2):-

[tex]a = \sqrt{(g)} / \sqrt{ ((k/4) / m)}[/tex]

Note that the constant k is difficult to calculate exactly, as it depends on many factors such as the skydiver's body shape, size, and surface area, as well as the air density and altitude. However, we can use an estimated value of k to find an approximate value for the acceleration. For example, a common value used for k is 0.75, so if we use this value, we get:

[tex]a = \sqrt{(9.8 m/s^2)} / \sqrt{((0.75/4) / m)} = 0.677 = 0.68 m/s^2[/tex].

Hence, the magnitude of the acceleration of a skydiver who is currently falling at one-half his 0.68 m/s².

To know more about acceleration please refer: https://brainly.com/question/12550364

#SPJ4

A radio photon is a quantum of electromagnetic radiation in the radio frequency range of the electromagnetic spectrum. Electromagnetic radiation is a type of energy that travels through space as waves, and is characterized by its frequency, wavelength, and energy.

The energy of a radio photon from a particular radio station depends on the frequency of the radio wave, which is typically measured in Hertz (Hz). The energy of a photon is given by Planck's equation:

E = h*f

where E is the energy of the photon, h is Planck's constant (6.626 x 10^-34 joule-seconds), and f is the frequency of the wave.

For a typical radio station, the frequency of the radio wave is in the range of several hundred kilohertz to several megahertz. Let's take the example of a radio station that broadcasts at a frequency of 1000 kilohertz (1 megahertz).

Using the equation above, we can calculate the energy of a single photon of this radio wave as follows:

E = 6.626 x 10^-34 J*s * 1 x 10^6 Hz

E = 6.626 x 10^-28 joules

So, the energy of a radio photon from a 1-megahertz radio station is about 6.626 x 10^-28 joules.

To know more about radio photon visit:

https://brainly.com/question/14291666

#SPJ4

The volume of water displaced canoe compared to an ultra-lightweight  Kevlar canoe is 1.586ft^3 extra water.

Which would give us the total volume displace by each canoe, however, the problem asks us for the difference between volumes displaced, and thus the difference is:

ΔV = (Mc_c + Mc_K /ρ)_c - (Mc_c + Mc_K /ρ)_K

Since both the mass of the load and the density of the fluid is the same for both cases, the previous equation becomes:

ΔV = Mc_c - Mc_K /ρ

ΔV = 140lb - 41lb / 62.4 lb/ft^3

ΔV = 1.586ft^3

Kevlar canoe is a type of canoe made of a material called Kevlar. Kevlar is a strong synthetic fiber that is known for its resistance to abrasion, heat, and cuts. It is commonly used in the manufacturing of body armor, bulletproof vests, and other protective gear. In the case of a Kevlar canoe, the material is used to construct the hull of the canoe, making it lightweight, durable, and easy to maneuver.

Kevlar canoes are popular among outdoor enthusiasts, particularly those who enjoy canoeing or kayaking in whitewater rivers, lakes, or oceans. They are also popular among people who like to take long trips or expeditions as the Kevlar material ensures the canoe can withstand harsh conditions and heavy use.

To learn more about Kevlar canoe visit here:

brainly.com/question/13251346

#SPJ4

Complete Question: -

How much extra water does a 140-lb concrete canoe displace compared to an ultra -lightweight 41-lb Kevlar canoe of the same size carrying the same load?

They will impact human food supplies.

Climate change is affecting food production by causing changes in temperature, precipitation patterns, and extreme weather events, which can reduce crop yields and disrupt food systems. This, in turn, can impact food security and increase food prices, particularly for vulnerable populations. Climate change is also affecting the distribution of fish and other aquatic species, which are critical sources of protein for many communities.

In fact the statement that the climate change affects plants and animals more than people can be considered as true. Because, they cannot have sufficient protection as humans have.

The climate is the change in whether for a longer period of time over an area. The climate changes in each season and apart from that, some worse conditions in earth make some dramatic climate changes which badly affects all living and non- living things in the world.

The global warming is the notable climate change occurring in earth due to the uncontrolled emission of gases like carbon dioxide. The rise in temperature melts the ices and rises the sea level which leads to the extinction of some polar animals.

Plants and animals are more pronged to these changes because they don' t have sufficient protection against the threatening climatic changes. Hence, option C is correct.

Find more on climate changes:

https://brainly.com/question/28780196

#SPJ2

The acceleration due to gravity on a 9.8 x 1026 kg planet that has a radius of 2.8 x 107 m g = 9.8 m/s2.

calculation using the equation:

Gravity (g) = (G x Mass of Planet)/(Radius of Planet)^2

Where G is the gravitational constant (6.67408 x 10-11m3kg-1s-2).

Therefore, gravity (g) = (6.67408 x 10-11m3kg-1s-2 x 9.8 x 1026 kg)/(2.8 x 107 m)^2

g = 9.8 m/s2

What is acceleration due to gravity?

Acceleration due to gravity is the acceleration of an object in a vacuum due to the force of gravity. It is commonly denoted by g and has a value of 9.8 m/s² or 32.2 ft/s² at sea level on Earth.

Therefore, The acceleration due to gravity on a 9.8 x 1026 kg planet that has a radius of 2.8 x 107 m g = 9.8 m/s2.

To learn more about acceleration due to gravity

Here: https://brainly.com/question/2073284

#SPJ4

2. The field representation of a positive charge would not be a good representation of the gravitational field around one mass because the electric force between charged particles is an electromagnetic force that behaves differently from the gravitational force between masses.

3. The field around two positive charges would not be a good representation of the gravitational field around two masses because the direction of the electric force between two charges is dependent on their relative positions and charges, whereas the direction of the gravitational force between two masses is always attractive and points toward the center of mass.

4, A good analogy for the process of work being done and electric potential energy being stored when positive and negative charges are moved farther apart would be the process of lifting a heavy object because work must be done to lift a heavy object and store gravitational potential energy, work must be done to separate positive and negative charges and store electric potential energy.

5. The gravitational force is the dominant force we notice in our everyday interactions and at planetary or larger scales because it depends only on the mass of the objects, which is typically much larger than their charge.

The gravitational force between two masses is proportional to the product of their masses and inversely proportional to the square of the distance between them, while the electric force between two charges is proportional to the product of their charges and inversely proportional to the square of the distance between them.

Gravitational force is a long-range force that acts between all masses, while the electric force is a short-range force that acts only between charged particles.

Learn more about gravitational force and electric force at: https://brainly.com/question/29765278

#SPJ1

The molar mass of 34.26 g/mol corresponds to the molar mass of nitrogen gas (N2) which is 28.02 g/mol. So the unknown gas is probably nitrogen.

To identify an unknown gas, we need to determine its molar mass. You can use the ideal gas law to calculate the molar mass. The ideal gas law is:

PV = nRT

where P is pressure, V is volume, n is number of moles, R is gas constant, and T is temperature in Kelvin. To calculate the molar mass, rearrange the ideal gas law and solve for n.

n = PV/RT

The value of the gas constant R is 0.0821 L-atm/mol-K. To convert temperature to Kelvin, add 273.15 to the temperature in °C. Pressure must be converted from torr to atm. One atmosphere equals 760 torr, so:

P = 209 torr / 760 torr/atm

P = 0.2758 atmospheres

Additionally, we need to convert the volume from mL to L. 1 L = 1000 mL, V=732mL/1000mL/L

V = 0.732L

Now that we have all the values ​​we need, we can plug them into the ideal gas law equation to calculate the number of moles.

n = 0.2758 atm * 0.732 L / (0.0821 L-atm/mol-K * (21 + 273.15 K))

n = 0.0108 mol. The mass of the gas is given as 0.37 g, so the molar mass can be calculated as

molar mass = mass / mol

= 0.37 grams/0.0108 moles

= 34.26 g/mole

To learn more about molar mass:

https://brainly.com/question/30667799

#SPJ4

Miss case of 16 calculators, which she got for half price. Shipping was $12. Which brought the total to $100. The full price for a case is $176.

A calculation is a deliberate mathematical process that transforms one or more inputs into one or more outputs or results.

Here the price of the calculator has to be calculated

The total price including the shipping is $100

She got 16 calculators

Shipping was $12

100 - 12 = 88

Since there was half price.

88 x 2  = $176

Therefore, the full price for a case is $176.

To learn more about calculations, refer to the link:

https://brainly.com/question/6767262

#SPJ9