Answer:
Chromium
Explanation:
Chromium is a component in stainless steel, nonferrous alloys, chromate coatings and some welding consumables. . Chromium is converted to its hexavalent state, Cr(VI), during the welding process. . Cr(VI) fume is highly toxic and can damage the eyes, skin, nose, throat, and lungs and cause cancer. .
Describe the positive impact of new technologies on manufacturing
Technology in manufacturing has many positive outcomes. Automation can:
Improve quality: Automation controls the schedules and production lines without human interference. The program can optimize the schedule to reduce defects and inefficiencies, creating better-quality products.Reduce costs: Technology can operate with better efficiency, less waste, and fewer workers, creating long-term cost savings.Decrease production time: Manufacturing technology expedites the production process, so more batches can be made more quickly. You can create more products in less time and have a consistent run rate.Optimize the supply chain: The entire supply chain benefits from procurement and production that follows the delivery schedule.Have more consistent results: Automated technology is more consistent and eliminates the mistakes error-prone humans are more likely to create.Foster a safer workplace: Machines can do jobs that are dangerous for workers, preventing injury and risk. Technology can also identify risks and develop safety measures.What is the significance of lithium battery manufacturing?
The U.S. government treated their manufacture as critical to economic recovery.
They could replace other green initiatives in the auto industry.
The U.S. uses less than 2 percent of the world’s supply.
The significance is limited compared to the importance of semiconductors.
Our daily activities, from consumer gadgets to national security, are powered by lithium-based batteries. They offer fixed grid storage and make it possible for the transportation sector to be electrified.
What, for instance, is a consumer?Consumers are any person or entity who uses an item or service in its entirety. Here are a few instances: a client who spends money having their hair styled and trimmed by a hairstylist.
What is a customer vs. a consumer?A customer is always the one who uses a something or service in the end, even if they didn't buy it. When a client makes a purchase and uses the good or service personally, they are considered a consumer. Customers always buy goods or services, even if they are not the final consumers.
To know more about consumer visit:
https://brainly.com/question/30132393
#SPJ1
What requirements are necessary to protect an electric tool user from shock?
Tools must have a three-wire cord and be grounded
Tools must be double insulated or powered by a low-voltage isolation transformer
Both A and B
None of the above
Both A and B. Tools must have a three-wire cord and be grounded, or be double insulated or powered by a low-voltage isolation transformer to protect the user from electric shock.
What is the electric tool about?Electric tools can be dangerous if not properly designed and used. One potential hazard is electric shock, which can occur when an electrical current passes through the human body. To protect electric tool users from shock, there are two common approaches:
Double insulation or low-voltage isolation: Tools that do not have a ground prong can still be safe if they are designed with two layers of insulation, or are powered by a low-voltage isolation transformer. These approaches provide a barrier of insulation between the electrical current and the user, reducing the risk of shock.
Lastly, Grounding: Tools with metal cases or exposed metal parts must have a three-wire cord with a ground prong and be plugged into a properly grounded outlet. If there is a fault in the tool that could electrify the metal parts, the fault current will flow to ground, protecting the user from shock.
Learn more about electric tool from
https://brainly.com/question/13226398
#SPJ1
What is the primary difference between a manufacturing business and a service business?
Service companies offer customer support for the goods they produce.
Manufacturers deliver tangible goods; service companies provide intangible goods.
Manufacturers deliver services only.
There are no differences.
The main distinction between a manufacturing company and a service company is that the former produces tangible items while the latter offers intangible ones.
What is tangible and intangible goods?A non-financial item that cannot be seen or handled is an intangible asset. According to Florence Bessette, Business Advisor at BDC Advisory Services, "Patents or goodwill are appropriate examples." Physical objects make up tangible assets. Land, structures, automobiles, furnishings, and equipment are some examples. Products with a physical aspect, such as clothing or household items, are referred to as tangible goods. Products that a business sells that are not physical in nature are referred to as intangible goods. Most frequently, digital goods like software and licenses are the most well-liked.
What is difference between tangible and intangible?An intangible asset is one that doesn't exist physically. Compared to a physical asset, it is more challenging to trade. A tangible asset exists physically. Comparatively speaking to an intangible asset, it is comparatively simple to trade.
To know more about Tangible and Intangible visit:
https://brainly.com/question/29840541
#SPJ1
If a traffic light has malfunctioned,
a.
decrease your following distance.
b.
treat it as though a flashing yellow light is present.
c.
treat the intersection as a four way stop.
d.
wait for a traffic control officer to arrive.
Answer:
d wait for the traffic control officer to arrive
What are the differences between job shop manufacturing and batch manufacturing?
the level of production and the way that an item is made
the organizational structure and the quality of materials
the size of the factory and the number of workers
the worker’s skill level and the number of items being made
While mass manufacturing employs highly specialized equipment, devices, and tools, shops use broad sense ones. Tools for general and specific purposes can both be used in batch manufacturing.
Devices What do you mean?Devices are objects or systems that have a specific purpose or goal, including online communications devices like cell phones. The phrase left on your own devices, on the other hand, alludes to your freedom and capacity for entertainment.
Is a desktop a device?A desktop computer is a piece that personal equipment designed to be placed on top of a typical office desk. It connects to the hardware that people have used to utilize a computer, such as the keyboard, mouse, and display.
To know more about devices visit:
https://brainly.com/question/11599959
#SPJ1
How does manufacturing create the multiplier effect?
It spends money in additional sectors.
It supports economies of scale.
It multiplies profits from each sale.
It multiplies salaries and wages based on output.
The mining, utility, and supplier inputs are increased, and it opens up job and investment options in all the other industries that consume its goods, including retail, construction, and transportation.
What qualifies as retail?Commerce is the sale of products and services to people with the intention of making a profit from each transaction. It entails face-to-face or telephone-based direct interaction with consumers or clients.
Is a food store a retail establishment?This retail sales sector includes the subsector of food and beverage retailers. Businesses with in Food and drinks Stores subsector often sell food and drink products from fixed points of sale.
To know more about retail visit:
https://brainly.com/question/28963307
#SPJ1
What is one reason striking an arc is more difficult with the 7018 electrode than the 6010?
A.Thickness of the flux coating on the electrode
b. Angle the arc must be struck
c. Length of the electrode
d. Type of electrode holder which must be used
One reason striking an arc is more difficult with the 7018 electrodes than the 6010 is due to the thickness of the flux coating on the electrodes.
What makes it strike?The 7018 electrode has a thicker coating of flux than the 6010 electrodes, which makes it more difficult to strike an arc. The flux coating on the 7018 electrodes is designed to provide better shielding of the weld pool and produce a higher-quality weld, but it also makes it more difficult to start the arc. In order to strike an arc with a 7018 electrode, the operator needs to use a more forceful and deliberate technique than with a 6010 electrode.
To know more about striking an arc, Check out:
brainly.com/question/30294802
#SPJ1
What are some functional and aesthetic qualities in Shigeru Ban's design?
Some functional and aesthetic qualities in his design:
Functional qualities:
Sustainability: One of the key functional qualities of Shigeru Ban's design is its emphasis on sustainability.
Who is Shigeru Ban?Shigeru Ban is a Japanese architect known for his innovative and sustainable designs
Other functional qualities are:
Flexibility: Shigeru Ban's designs often incorporate flexible and adaptable elements that allow for easy reconfiguration or dismantling.
Efficiency: Shigeru Ban's designs often emphasize efficiency in terms of space, material use, and construction methods. This allows him to create structures that are both functional and cost-effective.
Aesthetic qualities:
Minimalism: Shigeru Ban's designs often exhibit a minimalist aesthetic, with clean lines, simple shapes, and an emphasis on functionality over ornamentation.
Lightness: Shigeru Ban's structures often appear light and airy, with an emphasis on transparency and an open, uncluttered feel.
Natural materials: Shigeru Ban's designs often incorporate natural materials such as wood and paper, creating a connection to the environment and a sense of warmth and natural beauty.
Read more about designs here:
https://brainly.com/question/1020696
#SPJ1
Design an alogrithm to calculate even number from 1000 and 2000 and then print themin the starnder form it should also print total sum
The algorithm to calculate even number from 1000 and 2000 and then print them in the starnder form it should also print total sum is in explanation part.
What is programming?Making a set of instructions that instruct a computer how to carry out a task is the process of programming. Computer programming languages like JavaScript, Python, and C++ can all be used for programming.
The following Python formula computes the sum of all even numbers between 1000 and 2000 and prints the results in a consistent format:
even_sum = 0
even_numbers = []
for i in range(1000, 2001):
if i % 2 == 0:
even_sum += i
even_numbers.append(i)
print("Even numbers between 1000 and 2000:")
for i in even_numbers:
print("* " + str(i))
print("Total sum: " + str(even_sum))
Thus, the sum of the even numbers is printed with the message "Total sum:".
For more details regarding programming, visit:
https://brainly.com/question/11023419
#SPJ9
17.) A customer complains that a vehicle has an off-center steering wheel.
Technician A says that an incorrect toe adjustment could be the cause.
Technician B says that an incorrect camber setting could be the cause.
Who is right?
OA. A only
OB. B only
OC. Both A and B
OD. Neither A nor B
Answer:
C
Explanation:
An incorrect Camber can affect the wheel alignment
An incorrect toe adjustment can also be the cause ie C
What could you do to promote energy conservation and the use of renewable energy at your school
or in your community?
Why do careers in the manufacturing sector pay their workers more than careers in the service sector?
Manufacturing workers are more productive than service workers.
Service workers work more hours than manufacturing workers.
Service workers are not eligible for overtime.
Service workers receive more benefits than manufacturing workers.
Manufacturing workers typically receive higher wages because their jobs require a higher level of skill and pose greater physical demands than service workers. Manufacturing workers also tend to require a higher.
What is the Manufacturing ?Manufacturing is the process of transforming raw materials into finished products through the use of physical processes such as machining, casting, molding, stamping, assembling, and welding. It is a vital part of the production process, as it involves physically constructing products from component parts. Manufacturing involves a range of activities, from the design of products to the assembly and packaging of them. It also involves the development of assembly lines and other processes to ensure efficient and cost-effective production. Manufacturing processes are also used to produce components for other industries, such as automotive, aerospace, and medical.
To learn more about Manufacturing
https://brainly.com/question/13440987
#SPJ1
Of all of the important economic impacts of globalization, which of these is least significant?
International supply and demand may lead to more reliance on new technologies.
Goods produced internationally may meet different quality standards, fueling a need for more quality control.
Consumers demand products at lower prices, which leads to outsourcing.
As information is more widespread, consumers demand product and service offerings available outside of their own nation.
Answer:
It is difficult to say that any of the impacts of globalization is "least significant," as all can have major effects on different aspects of the economy. However, if one were to prioritize the impacts based on their significance, it could be argued that "international supply and demand may lead to more reliance on new technologies" may be the least significant, as it is one of several consequences of globalization and is likely to be influenced by other factors as well.
Explanation:
need help with 1.2.3 multiview structure cards on PTLW
Answer:
I'm not sure I understand what the question would be.
but the build is a half cylinder layer on its side, with two rectangular pillars stacked upright beside that cylinder. and a shirt rectangular pillar across the top on its side, short side touching the upright pillars, broad side face front/back.
Which of the following reasons for a proposed regulation might be important for a legislator voting on the issue to consider? (Select all that apply.)
The fair implementation of this regulation might require a level of technology that is unavailable to many in the industry or that does not yet exist in any reliable form.
The regulation concerns a safety issue that could have a major effect on people in the area affected.
It has been at least two decades since a regulation in this area has been passed.
The regulation will interact with employment law in that it will impose certification burdens on companies and workers that could eventually lead to terminations and lawsuits based on those terminations.
Answer:
The following reasons might be important for a legislator voting on a regulation:
The regulation concerns a safety issue that could have a major effect on people in the area affected.
The regulation will interact with employment law in that it will impose certification burdens on companies and workers that could eventually lead to terminations and lawsuits based on those terminations.
Explanation:
Which of the following technical advances has created new jobs and opportunities in the printing industry? (Select all that apply.)
desktop publishing software
graphic software
data analysis
scanners
The is list of graphic software Email marketing, tags, manuals, and marketing materials are just a few of the new occupations and possibilities brought about by technological advancements in the printing sector.
By graphic software, what do you mean?Digital pictures are created using graphics software, a computer application. Even vector and raster pictures may be produced using graphics software. The capacity to produce, modify, and save pictures in a number of formats is a common feature of graphics software.
Does PowerPoint include a graphic component?Slides: Slides are presentations that include text, images, music, video, animations, and other effects. Presentation software is another name for presentation graphics. Microsoft PowerPoint is the ideal illustration of a presentation graphic.
To know more about graphic software visit:
https://brainly.com/question/21447471
#SPJ1
High-reach support stands should be used to stabilize a raised vehicle and when a particularly heavy part is to be removed from the vehicle.
The statement "To stabilize a lifted vehicle and when removing a particularly heavy part from the vehicle, high-reach support stands should be employed." is true.
What is high-reach support?When a vehicle is elevated and a particularly heavy element needs to be removed from it, high-reach additional stands should be utilized to steady the vehicle. Never tie or block an operating control in an open position.
For tasks requiring significant weight displacement or shaking the vehicle, use high-reach vehicle support platforms to help stabilize it.
Therefore, the statement is true.
To learn more about high-reach support, refer to the link:
https://brainly.com/question/28357683
#SPJ9
The question is incomplete. Your most probably complete question is given below:
True or false.
The functions f and g are defined as
f:x-5x-7
5x/x +4
(b) Find gf(2.6)
The value of the function that given will be 3.
How to calculate the functionIt should be noted that a function simply has to do with the statement that illustrates the variables given. In this case, it is vital to note that two or more components are considered in order to be able to describe the scenario.
In this case, f(2.6) will be:
= 5(32.6) - 7
= 13 - 7
= 6
g(6) = 5(6) / 6+4
= 30 / 10
= 3
Learn more about functions on:
brainly.com/question/10439235
#SPJ1
What effect did the Great Recession have on manufacturing employment?
An average of more than 50,000 jobs was lost every month for 10 years.
An average of more than 100,000 jobs was lost every year for 10 years.
An average of more than 500,000 jobs was lost every year for 10 years.
An average of more than 10,000 jobs was lost every month for 10 years.
The correct answer is "An average of more than 500,000 jobs was lost every year for 10 years."
What is the Great Depression?The Great Recession, which lasted from December 2007 to June 2009, had a significant impact on manufacturing employment in the United States.
According to the Bureau of Labor Statistics, the manufacturing sector lost an average of more than 500,000 jobs per year during the first decade of the 21st century.
This represented a significant decline in the number of manufacturing jobs, and many workers in this sector were affected by the economic downturn.
Read more about The Great Depression here:
https://brainly.com/question/441267
#SPJ1
What is the most important contribution that manufacturing makes to a nation’s status as a world power?
builds global networks through outsourcing
produces tools and equipment to defend the country
keeps manufacturing equipment and technology away from terrorists
maintains control over materials and equipment
What are some characteristics of, or in Shigeru Ban's design?
Shigeru Ban is a Japanese architect known for his innovative use of materials and his commitment to sustainable design. Some of the characteristics of Ban's design include:
Use of sustainable materials: Ban is known for his use of recyclable and sustainable materials, such as paper and bamboo, in his designs. He is particularly interested in developing new building techniques that minimize waste and environmental impact.
What is Shigeru Ban's design?Other factors includes:
Innovative structures: Ban is known for his innovative structures, which often challenge conventional building techniques and push the boundaries of what is possible with sustainable materials. He is known for creating lightweight, flexible, and modular structures that can be easily assembled and disassembled.
Lastly, Attention to detail: Ban is known for his attention to detail and his commitment to creating functional and aesthetically pleasing spaces. He pays close attention to the details of his designs, from the materials he uses to the way light enters a space, to ensure that his buildings are not only sustainable, but also comfortable and inviting.
Learn more about design from
https://brainly.com/question/1020696
#SPJ1
Storing parts outside doesn't cause any environmental risks as long as the items are covered
False?
I'm guessing this is a true or false because if it is parts can easily be blown away and get damaged (or the covering can get blown away) but if its not a true or false then i dont gotchu
What are some functions in Shigeru Ban's design?
Note that some functions in Shigeru Ban's design include shelter, disaster relief, sustainability, and social responsibility.
What is the rationale for the above response?Ban's work often centers on humanitarian architecture that addresses pressing issues such as homelessness, natural disasters, and environmental concerns.
His designs prioritize functionality and affordability while also incorporating sustainable materials and techniques. For example, his use of cardboard tubing as a structural material has provided low-cost and easily transportable housing solutions in disaster zones. Note that, Ban's work embodies the idea that architecture should serve the needs of society and contribute to society.
Learn more about Shigeru Ban:
https://brainly.com/question/28102463
#SPJ1
Is dis rite?
Ples answer
Answer:
yass its right
Explanation:
How is the Internet of Things (IoT) changing manufacturing?
Manufacturers need fewer workers with degrees in science.
Manufacturers can outsource work more effectively.
Manufacturers can make better predictions about sales.
Products contain systems that let them talk to each other.
Adopting the Industrial Web of Things can benefit manufacturing companies on all fronts, including customer happiness, production efficiency, and strategic business choices.
What does the word "business" mean?An organization or entrepreneurial entity engaging in economic, commercial, or professional activities is referred to as a business. Organizations can be for-profit corporations or charitable institutions. Limited liability firms, sole proprietorships, trusts, and partnerships are among the several forms of businesses.
What does the word business also mean?Calling, employment, métier, vocation, pursuit, and work are a few typical synonyms for business. All of these terms refer to "a specific persistent activity engaged in specifically to earn one's living," but the word "business" implies involvement in commerce or the administration of finances.
To know more about business visit:
https://brainly.com/question/1384274
$SPJ1
The functions f and g are defined as
f:x-5x-7
5x/x +4
(a) Write down the value of x that must be excluded from any domain of g
The value of x that must be excluded from the domain of g is x=0, since division by zero is undefined.
How is this so?The function g is defined as g(x) = 5x/(x + 4), and this function involves division. In mathematics, division by zero is undefined and results in an indeterminate form.
In order to have a well-defined and meaningful function, we must exclude x=0 from the domain of g, since for x=0, the denominator of the fraction becomes zero and the division is undefined.
Hence, for the function g to be meaningful, we must only consider values of x such that x ≠ 0.
This is why x=0 must be excluded from the domain of g.
Read more about domains here:
https://brainly.com/question/26098895
#SPJ1
Trevor made the following table to compare the energy transformations of four household objects that use electrical energy. Which of the following would best replace X?
Form of Energy Used Other Form of Energy
Transformed By Item
Microwave Electrical Energy Heat
Blender Electrical Energy Energy of Motion
Doorbell Electrical Energy Heat
Lamp Electrical Energy X
Energy of Motion
Heat
Light
Sound
PLS HELP ME RIGHT NOW
The best replacement for X in the table would be "Light," as a lamp uses electrical energy to transform it into light energy.
When an electrical current flows through the lamp's filament, it heats up and emits light, creating a visible source of illumination.This process is an example of energy transformation, as the lamp converts electrical energy into another form of energy - in this case, light. Other examples of energy transformation listed in the table include the microwave converting electrical energy into heat energy, the blender converting electrical energy into energy of motion, and the doorbell converting electrical energy into sound energy.Understanding these energy transformations is important for understanding the workings of household appliances and for conserving energy. By using appliances that are more efficient at converting energy, such as LED lamps instead of incandescent lamps, individuals can reduce their energy consumption and environmental impact.To know more about transformation visit:
https://brainly.com/question/14299753
#SPJ1
The type of products a company manufactures determines how many individuals or departments it needs to handle its sales, marketing, purchasing, human resources, or IT functions.
True
False
The type of items a company produces determines the marketing strategies it employs to promote the acquisition or sale of such a product or service. things that a corporation produces decide.
An item is what?A product is the commodity that is sold. A company or an object both qualify as products. It might assume physical, virtual, or electronic form.
What sort of merchandise is that?Any thing that is sold to a consumer is a product. Typically, a product is a finished good, refined substance, or raw material. Non-tangible goods can also be sold, including services, virtual goods like software, and in-app purchases for mobile games.
To know more about Product visit:
https://brainly.com/question/29423646
$SPJ1
What aspect of Frederick Winslow Taylor’s scientific management style has been reversed in contemporary management approaches such as Six Sigma?
workers not considered qualified to improve processes
replacing work stations with assembly lines
importance of eliminating waste
need for a skilled workforce
Robert Winslow The requirement for a skilled staff was heavily emphasized in Taylor's scientific management approach, and employees were viewed as being unqualified to change processes. Therefore, the appropriate response is: employees who are not seen as qualified to enhance processes.
What is processes replacing?When a malware author wishes to disguise their program as a legitimate process without running the risk of using process injection to crash the target process, they utilize process replacement. A process is a single instance of software operating on a computer. This has a similar connotation to the word "task," which is used in different operating systems. When a program is launched under UNIX and some other operating systems, a process is launched (either by a user entering a shell command or by another program).
What is processes in operating system?An active program known as a process forms the basis of all computation. Although relatively similar, the method is not the same as computer code. A process is a "active" entity, in contrast to the program, which is sometimes thought of as some sort of "passive" entity.
To know more about Processing visit:
https://brainly.com/question/29775379
#SPJ1
