The magnitude of the acceleration of the moon towards the earth is 0.003 [tex]m/s^2[/tex].
The acceleration means the rate with which the velocity of an object changes.
The time the moon takes to complete one revolution, t = 27.3 days = 2358720 s
The distance travelled in circular path, d = [tex]2\pi r[/tex] = [tex]24015\times 10^8[/tex] m
where radius r = [tex]3.844\times 10^8[/tex] m
The formula in circular motion is :
[tex]a=\frac{v^2}{r}[/tex]
[tex]v=\frac{d}{t}[/tex]
So substituting the values:
[tex]a=\frac{(1.024\times 10^3)^2}{3.844\times 10^8}[/tex]
[tex]a\approx 2.8\times 10^{-3} \ m/s^2[/tex]
[tex]\therefore a\approx 0.003 \ m/s^2[/tex]
The value of the acceleration of the moon towards the earth is 0.003 [tex]m/s^2[/tex].
To learn more about Attention here:
https://brainly.in/question/29716405
#SPJ4
By default setting, the word stored at address 0x8004 is: _______________________
According to the given statement is At address 0x8004, the default data word is 0xA7908CEE.
Briefing:Little Endian method with a word size of 4 Bytes is the default on ARM processors.
Data is stored in the memory bytes at a time, and access is done in words.
The data must be stored in 4 cells because word size is equal to 4 bytes.
i.e., the data word is retrieved in parallel from 4 cells.
Little endian states that lower addresses have lower bytes and higher addresses have higher bytes.
At location 0x8004, the default data word is 0xA7908CEE.
What is little endian data?The sequence in which data is stored in memory is referred to as the "little-endian" convention. According to this convention, the least significant bit (or "littlest" end) is placed at address 0 first, followed by the storage of following bits one at a time.
To know more about Little Endian visit:
https://brainly.com/question/18687598
#SPJ4
Find the prime factorization of the integers of the form 10p-1 for p=1-7 what is the relevance of these factorizations to the behavior to the behavior of the decimal representation?
The integers can be arranged in the form of 10p - 1 such that p = 1-7 in the was as follows:
10p-1 = (10*1) - 1 = 9 = [tex]3^{2}[/tex] = 3x3
10p-1 = (10*2) - 1 = 19 = [tex]19^{1}[/tex]
10p-1 = (10*3) - 1 = 29 = [tex]29^{1}[/tex]
10p-1 = (10*4) - 1 = 39 = 3x13
10p-1 = (10*5) - 1 = 49 = [tex]7^{2}[/tex] = 7x7
10p-1 = (10*6) - 1 = 59 = [tex]59^{1}[/tex]
10p-1 = (10*7) - 1 = 69 = 3x23
Here we see that not all are in the form of 2^n x 5^m where n and m are non-negative integers.
As per the rule, if A =p/q be a rational number such that p and q are co-prime and the prime factorization of q is not in the form of 2^n x 5^m where n and m are non-negative integers, then A has a decimal expansion which is non-terminating recurring decimal.
To know more about prime factorization, visit:
https://brainly.com/question/10454590
#SPJ4
Find the vector v with the given magnitude and the same direction as u. magnitude direction v = 4 u = 1, 1
The vector v with the given magnitude and the same direction as u. magnitude direction v = 4 u =< 1, 1>
=4/[tex]\sqrt2{^{2} }[/tex] i + 4/[tex]\sqrt2{^{2} }[/tex] j
What is vector?Vector, in physics, a quantity that has both magnitude and the direction. It is a typically represented by an arrow whose direction is the same as that of the quantity and whose length is proportional to the quantity’s magnitude. Although vector has magnitude and direction, it does not have the position. That is, as long as its length is not changed, vector is not altered if it is displaced parallel to itself.
In contrast to vectors, ordinary quantities that have a magnitude but not a direction are called the scalars. For example, displacement, velocity, and acceleration are vector quantities, while the speed (the magnitude of velocity), time, and mass are scalars.
To qualify as a vector, a quantity having magnitude and direction must also obey certain rules of the combination.
Therefore,
A vector a with given magnitude in the direction of b, is given by:
(||a||.b)/||b||
||u||=[tex]\sqrt{1^{2}+1^{2} }= \sqrt{2^{2} }[/tex]
||v||=4
[4(1+1)]/[tex]\sqrt{2^{2} }[/tex]= 4/[tex]\sqrt2{^{2} }[/tex] i + 4/[tex]\sqrt2{^{2} }[/tex] j
To know more about scalar visit: https://brainly.com/question/21925479
#SPJ4
A solution is prepared by adding 1.43 mol of kcl to 889 g of water. the concentration of kcl is ________ molal.
A solution is prepared by adding 1.43 mol of KCL to 889 g of water. The concentration of KCL is 1.61 molal.
What is molality?Molar concentration, also known as molarity, quantity concentration, or substance concentration, is a unit used to describe the amount of a substance in a solution expressed as a percentage of its volume.
The number of moles per liter, denoted by the unit symbol mol/L or mol/dm3 in SI units, is the most often used unit denoting molarity in chemistry. One mol/L of a solution’s concentration is referred to as one molar or 1 M.
Mol of Kcl (potassium chloride) = 1.43
water = 889 g = 0.889kg
Molality = Moles of solute/kilograms of solvent
So, it comes as m = 1.43/0.889 = 1.61 molal
To know more about molality, visit:
https://brainly.com/question/4479955
#SPJ4
A red water balloon is thrown horizontally from the top of a bridge. At the same instant, a yellow water balloon is dropped off the bridge from the same height. Compare the time of fall for the two balloons. Assume air resistance is negligible.
The time of fall for the two balloons is equal.
Here the conditions given resembles a free fall. Since the air resistance is negligible, gravitational force is the only force acting on both the balloons which means the two balloons are falling in a vacuum. In a vacuum, if two objects of different mass are thrown from the same height, both objects will reach the ground at the same time.
Free fall is nothing but a condition in which an object falls solely under the influence of gravity.
Therefore, the time of fall for both yellow and red water balloons is equal no matter the weight where air resistance is negligible.
To know more about free fall
https://brainly.com/question/13299152
#SPJ4
How do ribbons differ from the toolbars used in previous versions of office applications? point out the advantages of using the ribbons.
The ribbon replaces the menus and toolbars in previous versions. The Ribbon makes available most of the functions that were previously hidden in the File menus.
The ribbon is a command panel that organizes program functions into a series of tabs at the top of the screen. Ribbon tabs consist of groups of closely related commands to help users quickly find the commands they want. Each ribbon is a bar across the page.
The advantages of using the ribbons are:
The ribbon makes it easy to see and find commands for formatting a document.Ribbons are a modern way to help users find, understand, and use commands efficiently and directly with a minimum of clicks, no trial-and-error, and no reference to help.To know more about ribbon,
https://brainly.com/question/13151054
#SPJ4
In a first order decomposition, the constant is 0.00702 sec-1. what percentage of the compound has decomposed after 7.1 minutes?
The percentage decomposed in the first order reaction is 69.8%.
What percentage of the compound has decomposed after 7.1 seconds?Given: rate constant, k = 0.00702 sec -1
time, t = 7.1 s
Since the reaction is first order, we calculate using the formula below:
[A] = [A]₀ [tex]$$e^{(-kt)[/tex]
Where; [A] is the final concentration
[A]₀ is the initial concentration
Finding the ratio of final and initial concentration
[A]/[A]₀ =[tex]$$ e^{(-kt)[/tex]
Substituting the values:
[A]/[A]₀ = [tex]e^{(-0.00702 * 7.1)[/tex]
[A]/[A]₀ = [tex]e^{(-0.0498)[/tex]
[A]/[A]₀ = 0.9514
Percentage decomposed = [A]/[A]₀ [tex]*[/tex] 100%
Percentage decomposed = 0.9514 [tex]*[/tex] 100%
Percentage decomposed = 95.1 %
Therefore, the percentage decomposed in the first-order reaction is 95.1 %.
To learn more about percentage decomposition refer to: brainly.com/question/1563644
#SPJ4
Asteroids were recently formed by the collision and breakup of an object orbiting in the asteroid belt. True or false?.
It is false that asteroids were recently formed by the collision and breakup of an object orbiting in the asteroid belt.
Asteroids are stony objects that orbit the sun but are too tiny to be classified as planets. They're also referred to as planetoids or small planets. There are millions of asteroids that range in size from hundreds of kilometers to a few feet. The combined mass of all asteroids is less than that of Earth's moon.
The solar system's makeup is fairly uniform. The combined mass of the planets is substantially less than that of the Sun. The majority of comets have short periods and orbit near the ecliptic plane.
The asteroid belt is a torus-shaped area in the Solar System lying roughly between Jupiter and Mars' orbits. It is home to a large number of solid, irregularly shaped things of various sizes, but far smaller than planets, known as asteroids or minor planets. To distinguish it from other asteroid populations in the Solar System, such as near-Earth asteroids and Trojan asteroids, this asteroid belt is sometimes known as the major asteroid belt or main belt.
To learn more about asteroids. Click, https://brainly.com/question/19161842
#SPJ4
Is it possible to have a function f defined on 2,5 and meets the given conditions? f is continous on (2,5) and he range is a bounded interval
F is continuous on (2,5) and the range is provided as a bounded interval
Although not true for all functions listed [2,5], this is conceivable. For instance, the unbounded range of the function f(x)=x3 is (), which is defined and continuous on the interval [2,5].
How do you tell if a function is ongoing over time?When a function is specified at each point along an interval without any gaps, leaps, or interruptions, the interval is said to be continuous for that function.
We say that a function f(x) is continuous on the interval [a, b] if it meets these requirements from x=a to x=b, for instance.
Is the endpoint of a function continuous?At the right endpoint b, a function is continuous if. The reasons why the endpoints are defined individually.
Because only one way can be used to check for continuity, the endpoints are defined independently. The values will not be in the domain and won’t apply to the function if the limit of an endpoint is checked from a side that is outside the domain.
To know more about continuity of A function visit:
https://brainly.com/question/12990870
#SPJ4
What is the wavelength (in nm) of radiation having a frequency of 2.45 x 1015 hz?
1.22 x 10⁸ nm is the wavelength of radiation.
Steps2.45 x 10⁹ = frequency(v)
3.00 x 10⁸ = speed of light(c)
(3.00 x 10⁸ m/s)/(2.45 x 10⁹ Hz)= 1.22 x 10⁸ nm
1.22 x 10⁸ nm is the wavelength of radiation.
What wavelength is it?A waveform signal that is carried in space or down a wire has a wavelength, which is the separation between two identical places (adjacent crests) in the consecutive cycles. This length is typically defined in wireless systems in meters (m), centimeters (cm), or millimeters (mm) (mm).What is an example of a wavelength?Here are some wavelength examples: Yellow Light is a prime example.The wavelength range of all visible light is 400 to 700 nanometers (nm). The wavelength of yellow light is 570 nanometers or such.
learn more about wavelength here
https://brainly.com/question/6297363
#SPJ4
Homework Help!! Thsnkyouu
A. The frisbee will remain in the air for 5.88 s
B. The horizontal distance the frisbee will go is 29.4 m
A. How to determine the time the frisbee will remain in the airThe time the frisbee will spend in the air can be obtained as illustrated below:
Height (h) = 169.2 mAcceleration due to gravity (g) = 9.8 m/s²Time (t) =?169.2 = ½gt²
169.2 = ½ × 9.8 × t²
169.2 = 4.9 × t²
Divide both side by 4.9
t² = 169.2 / 4.9
Take the square root of both side
t = √(169.2 / 4.9)
Time = 5.88 s
How to determine the horizontal distanceThe horizontal distance travelled by the frisbee can be obtained as follow:
Initial velocity (u) = 5 m/sTime (t) = 5.88 sHorizontal distance (s) =?s = ut
s = 5 × 5.88
Horizontal distance = 29.4 m
Learn more about motion under gravity:
https://brainly.com/question/22719691
#SPJ1
Consider the reaction, 2 d(g) 3 e(g) f(g) => 2 g(g) h(g) when e is decreasing at 0.36 mol/ls, how quickly is f decreasing? give your answer to 3 decimal places.
The rate at which F is decreasing is 0.12 mol / L s
Given that,
2 D(g) + 3 E(g) + F(g) → 2 G(g) + H(g)
Rate of reaction = - ΔD / 2 Δt = - ΔE / 3 Δt = - ΔF / Δt = ΔG / 2 Δt = ΔH / Δt
Given that,
- ΔE / Δt = 0.36 mol / L s
- ΔE / 3 Δt = - ΔF / Δt
- 0.36 / 3 = - ΔF / Δt
- ΔF / Δt = - 0.12 mol / L s
The rate of reaction is the measure of how quickly or slowly that a reaction proceeds.
Therefore, the rate at which F is decreasing is 0.12 mol / L s
To know more about rate of reaction
brainly.com/question/8526467
#SPJ4
I need some serious help, i do not understand this question!!
An Alaskan rescue plane traveling 47 m/s
drops a package of emergency rations from
a height of 179 m to a stranded party of
explorers.
The acceleration of gravity is 9.8 m/s^2
Where does the package strike the ground
relative to the point directly below where it
was released?
Answer in units of m.
The position where the package strikes the ground is 136.3m.
Time of motion of the package
Use the following kinematic equation;
h = vt + ¹/₂gt²
179 = 47t + ¹/₂(9.8)t²
179 = 47t + 4.9t²
4.9t² + 47t - 179 = 0
solve the quadratic equation using formula method;
a = 4.9, b = 47, c = -179
t = 2.9 seconds
Horizontal distance traveled by the packageX = vt
X = 47m/s x 2.9 s
X = 136.3 m
Thus, the position where the package strikes the ground is 136.3m.
Learn more about time of motion here: https://brainly.com/question/2364404
#SPJ1
Venus is sometimes called:_____.
a. the evening star
b. the early star
c. the late star
The correct option is (a)the evening star.
Venus is sometimes called the evening star.
Briefing :Venus is the final celestial body to withdraw from view at sunrise and the first to appear in the evening sky. It is referred to as the Morning and the Evening star for this reason. Three factors account for Venus's brightness. First of all, it approaches Earth more closely than any other planet. Second, compared to other inner planets, it is very huge, with a diameter that is nearly twice that of Mars and three times that of Mercury. Thirdly, Venus' dense cloud cover entirely scatters much of the light back into space. Venus really reflects more sunlight than any other planet, at 77%. Venus is so brilliant that it may even be seen during the day.Learn more about the venus with the help of the given link:
https://brainly.com/question/12134483
#SPJ4
How many coulombs of charge enter a 1.4 cm length of the axon during this process?
Charge enter a length of the axon during this process is 1.2544C
CHARGE : It is a physical property of matter that causes it to experience a first, then it placed in between the electromagnetic field.
During the inflow part of a cycle in the neurons approximately
5.6× 10¹¹Na ions per meter,
each with a charge of +e enter the axon.
Therefore, ions will be (5.6 ×10¹¹) × (1.4/100)
= 7.84 × 10⁸ Na ions
Charge of an electron is 1.6 × 10⁻¹⁹Coulombs
Thus; 7.84 ×10⁸ ×1.6 ×10⁻¹⁹
= 1.2544×10⁻¹⁰ coulombs
Charge enter a length of the axon during this process is 1.2544C
The given question is incomplete the complete question is
How many coulombs of charge enter a 1.4 cm length of the axon during this process?
To know more about charge
https://brainly.com/question/2805673
#SPJ4
Juanita's fingertip is 1 centimeter wide and her arm is 60 cm long. what angle, in radians, does her fingertip span in her field of view? (use the formula you chose in the previous step.)
The angle in radians is 1/60.
The corresponding angle should describe a length of 1 cm at a distance of 60 cm from the point of view and that is the sole idea behind this question.To calculate the angle numerically a formula is needed and that should be [tex]s = r \theta[/tex] in which [tex]s[/tex], [tex]r[/tex] & [tex]\theta[/tex] represent the length described at the given distance from the view, that distance just mentioned and the angle the [tex]s[/tex] length subtends at the viewing point.Therefore, simply substituting the available data in that formula yields the required result.[tex]\begin{aligned}\\\small s &= r\theta \\\\\small 1\,cm &=\small 60\,cm\times \theta \\\\\small \theta &=\small \frac{1}{60}\,\text{radians}\end{aligned}[/tex]
Radian is a dimensionless quantity.
How many water molecules are present in 222.22 ml sample of water ( molar mass =18.01 g/mol)
7.4304*10²⁴ molecules water molecules are present in 222.22 ml sample of water ( molar mass =18.01 g/mol).
Mass of water = density * volume
=1.00gm/mμ*222.22mol
=222.22gn
No of moles of water = mass/molar mass
no of water molecules/Avogadro no.=12.34 mol
no of water molecules= 12.34 mol * 6.022*10²³ mol
=74.304*10²³ molecules
=7.4304*10²⁴ molecules
so, 7.4304*10²⁴ molecules are present in 222.22 ml of water sample
7.4304*10²⁴ molecules.
Describe a molecule:One or more atoms make up molecules. They may have the same atoms (for example, an oxygen molecule has two oxygen atoms) or different atoms if they have more than one (a water molecule has two hydrogen atoms and one oxygen atom). Proteins and DNA are examples of biological compounds that can contain thousands of atoms.
To know more about molecule visit:
https://brainly.com/question/19922822
#SPJ4
In a first order decomposition, the constant is 0.00711 sec-1. what percentage of the compound is left after 6.07 minutes?
32.9%, is the percentage of compound left after 6.07 minutes.
We utilize the equation A(t) = A0e-kt for decomposition, where A0 is the beginning amount of the decomposed substance at time t = 0, k is the decay constant, t is the passing of time, and A(t) is the amount at the end of time t.
The original amount, [A0], multiplied by 100 to get [A(t)], or A/A0*100, is the fraction of the decomposed molecule that is still present after time t:
A = A0e-kt
Divide both sides by A0, k = 0.00299, and A/A0 = e-0.00299t.
A/Ao is equal to e-0.00299*372, where
t = 6.2 min*(60 sec/ 1 min)
= 372 sec.
A/A0 = .3288 = 32.9%,
Learn more about compound here-
https://brainly.com/question/13516179
#SPJ4
1. if a wave traveling through air decreases its wavelength by half, what happens to the wave speed and frequency?
Wave speed decreases by half while the frequency remains constant.
For any wave the equation [tex]v = f \lambda[/tex] holds true.The frequency is a quality of a given wave and it does not change with the external parameters.So, the possibility is for the [tex]v[/tex] and [tex]\lambda[/tex] to change accordingly.Therefore, [tex]v[/tex] and [tex]\lambda[/tex] are directly proportional to each other. Thus when the wavelength decreases by half the speed also decreases by half.This can be shown as follows as well.
[tex]\begin{aligned}\\\small v_1 &=\small f.\lambda_1\quad\cdots\cdots(1)\\\\\small v_2 &=\small f.\frac{\lambda_1}{2}\quad\cdots\cdots(2)\\\\(2)\div&(1)\\\\\small v_2 &=\small \frac{v_1}{2}\end{aligned}[/tex]
#SPJ4
5) In the picture to the right, a wave source is
moving to the right. Measure the wavelengths
recorded by observer A, on the left, and
observer B, on the right.
Do this by measuring 5 wavelengths and
dividing by 5 to get a precise average.
Answer: most likely its going to be 5
Explanation:
because you have to keep it the same
The analysts at techno infosystems are considering the four-model approach to system development for a new client. if they make use of the four-model approach, which is a likely outcome?
The analysts at techno infosystems are considering the four-model approach to system development for a new client. if they make use of the four-model approach, the outcome will be the time taken to develop the model increases.
With a commitment to giving Government PSUs, Educational Institutions, and All Organizations across the country a competitive advantage by making current operations efficient & cost-effective, Techno is a brand name of Richa Infosystems Limited, which is working under the government's initiative to support "Vocal for Local."
The speed of techno, a kind of electronic dance music, frequently ranges between 120 and 150 beats per minute and is typically generated for usage in a continuous DJ set. Common time is usually used for the core rhythm, which is frequently distinguished by a repeating four on the floor beat.
Electronic dance music without vocals or a typical popular song structure, with a quick pace and artificial noises.
Learn more about techno infosystem:
https://brainly.com/question/14993208
#SPJ4
Which layer of the osi model ensures the data being sent from the sender is formatted correctly so it can be interpreted correctly by the recipient system?
The presentation layer is sometimes known as the syntax layer since it is in charge of ensuring that the data it either receives or transmits to other layers has the correct syntax. Data sent across the network is formatted and encrypted by the presentation layer.
What is meant by the presentation layer?The presentation layer, which is layer 6 in the seven-layer OSI model of computer networking, acts as a network's data translator. It is referred to as the syntactic layer at times.
The communication is given to the top layer in a defined format thanks to the presentation layer (Layer 6). It deals with the messages' syntax and meaning. Communication across disparate systems, encrypts messages from the user-dependent format to the common format and vice versa.
The presentation layer, which is located at Layer 6 of the Open Systems Interconnection (OSI) communications architecture, makes sure that all communications passing through it are in the right format for the destination application. In other words, from the application layer's point of view, it provides the data in a comprehensible format.
To learn more about the presentation layer, refer to:
https://brainly.com/question/12974549
#SPJ4
What is the difference between contact forces and non-contact forces?
Here is the difference between contact forces and non-contact forces:
Contact forces are forces that result from two objects coming into physical contact with each other. Non-contact forces are forces that result from the interaction of objects that are not in contact with each other.
The seafloor spreads in opposite directions as magma forces its way upward. Geologists have observed matching, reversed magnetic bands on both sides of this ridge. Which is the best explanation of these matching, reversed bands?
When the Earth's magnetic field reverses, a new stripe, with the new polarity, begins. Such magnetic patterns led to recognition of the occurrence of sea-floor spreading, and they remain some of the strongest evidence for the theory of plate tectonics.
d. the earth experiences cycles of magnetic poles reversingWhy are the magnetic stripes on the sea floor parallel to and symmetrical across the mid-ocean ridge?The specific magnetism of basalt rock is determined by the Earth's magnetic field when the magma is cooling. Scientists determined that the same process formed the perfectly symmetrical stripes on both side of a mid-ocean ridge. The continual process of seafloor spreading separated the stripes in an orderly pattern
With this information, we can conclude that A polarity reversal means that the magnetic North flips to where we know the South Pole is. At the mid-ocean ridge spreading axis.
Learn more about Earth's magneti in brainly.com/question/7958561
#SPJ1
Newton did not discover gravity, for early humans discovered that whenever they fell. what newton did discover is that gravity _______.
What Newton discovered is that gravity extends throughout the universe.
What is gravity?The term gravity refers to the force that acts on a body in the universe. It is gravity that makes an object to fall when it is thrown up. The force of gravity acts on every object in the universe and it extends through the universe.
Humans have always known about gravity when they fall from a height and when they threw things up. However, human did not know that gravity extends throughout the universe.
Thus, what Newton discovered is that gravity extends throughout the universe.
Learn more about gravity:https://brainly.com/question/4014727
#SPJ1
What is the bulk modulus of oxygen if 39.9 g of oxygen occupies 27.9 l and the speed of sound in the oxygen is 342 m/s?
Bulk modulus of Oxygen is 1.44×10^5 Pa
Given:
mass of Oxygen = 39.9 g
volume of Oxygen = 27.9 l
speed of sound in oxygen = 342 m/s
To Find:
Bulk modulus of Oxygen
Solution:
The density of oxygen gas is
ρ = 0.0399/0.0279 = 1.43 kg/m^3
From v = √B/ρ we find
B = v^2ρ
B = (317 m/s)^2 x (1.43 kg/m^3)
B = 1.44×10^5 Pa
Hence, Bulk modulus of Oxygen is 1.44×10^5 Pa
Learn more about Bulk modulus here:
https://brainly.com/question/24179667
#SPJ4
Ammonia (nh3) and ammonium ion (nh4 ) can work together as a buffer in living systems. how do they carry out this function?
When modest amounts of strong acids or bases are added to a weak acid (or base), it forms a solution known as a buffer that resists pH changes.
The ammonium buffer, which is an aqueous solution of NH3 (ammonia) and NH4Cl (ammonium chloride), mixed in equal molar ratios, is a typical buffer, as the question implies. This creates an alkaline buffer with a pH of roughly 9.20, or higher than 7. It's interesting to note that as long as your concentrations stay the same, nothing else matters. Since ammonia is a weak base, the equilibrium will be located far to the left:
NH4+(aq) + OH NH3(aq) + H2O(l) (aq)
Additionally, a soluble salt called ammonium chloride will also be present in solution.
Learn more about buffer here-
https://brainly.com/question/22821585
#SPJ4
A wheel rotates with 1800rpm. A)Find the revolutions per minute. B)what is the angular speed of the wheel in rad/s. Use =3
Answer:
Option C
Explanation:
Initial frequency of rotation ν
i
=1800 rpm =1800/60=30 rps
Thus initial angular frequency w
i
=2πν
i
=60π rad/s
Final frequency of rotation ν
f
=3000 rpm =3000/60=50 rps
Thus final angular frequency w
f
=2πν
f
=100π rad/s
∴ Angular acceleration α=
t
w
f
−w
i
OR α=
20
100π−60π
=2π rad/s
2
Did helium created in fusion in the solar core reach the solar surface? explain.
The fusion of hydrogen nuclei in stars produced all of the helium in the Universe.
However, most stars undergo an internal transformation after turning a considerable percentage of their hydrogen to helium. The interior core compresses and warms up until it is hot enough to fuse helium into bigger atoms, for as by fusing three helium atoms into carbon. At the same time, some helium will combine with the carbon to generate oxygen. Outside the core, in what is known as the envelope, there is still enough hydrogen to fuse into additional helium. However, the center starts fusing heavier nuclei. This, by the way, is the transition from a 'regular' star like our Sun to a Red Giant.
After the red giant phase, the Sun will shed its outer layers, leaving behind a helium-rich core that will gradually cool throughout the course of the Universe. After the red giant phase with stars more massive than the Sun, it becomes practically a free for all for producing heavier and heavier atoms. When the helium in the core runs out, the star collapses again, heats up, and begins fusing carbon and oxygen into bigger atoms. If the star is large enough, this will continue until iron is fused. At such time, a hotter core will still not result in fusion. The star falls, becomes unstable, and explodes, resulting in supernovae and neutron stars (or black hole).
To learn more about fusion in the solar core. Click https://brainly.com/question/14445690
#SPJ4
If it takes e = 91.9 mj of energy to separate q = 2.91 c of charge, what is the resultant voltage?
The resultant voltage is calculated as 0.315 V
CalculationIt is given that
E = 91.9 mj
Q = 2.91c
V = E/Q
=91.9 x [tex]10^{-3}[/tex] / 2.91
= 31.58 mV
= 0.03158 V
Thus, the resultant voltage is calculated as 0.315 V
What is Voltage?The difference in electric potential between two points, which is defined as the work required per unit of charge to move a test charge between the two points, is known as voltage, electric potential difference, electric pressure, or electric tension.
Voltage can also be described as the pressure from an electrical circuit's power source that helps to push the charged electrons (current) through a conducting loop, that enables them to do work such as illuminating a light.
To know more about voltage, visit:
https://brainly.com/question/13521443
#SPJ4
