The resistance will also be doubled when the device is made of same material and when heated to the same amount.
Resistance is defined as the opposition in the flow of current in an electrical circuit. It is measured in ohm. The electrical resistance of a conductor of unit cross-sectional area and unit length is known as Resistivity. It is represented by ρ.
The relation between resistance and resistivity is, ρ = RA/l . Here, R is Resistance , A is Area of wire and l is length of wire. Resistivity is directly proportional to the resistance. The resistivity of a material is doubled when heated a certain amount. So, for a same material heated to same extend the resistance will also be doubled.
To know more about Resistance refer to link:
https://brainly.com/question/17563681
#SPJ4
Light can show us that an object is rotating when one side is moving toward us and one side is moving away using:_____.
Light can show us that an object is rotating when one side is moving toward us and one side is moving away using rotational Doppler effect.
Doppler effect in light is the change in frequency of light observed by the observer due to relative motion of source in relation with the observer.
When the source of light moves towards the observer frequency increases and the wavelength decreases causing a blue shift. But when the source of light moves away from the observer frequency decreases and the wavelength increases causing a red shift.
Therefore, light can show us that an object is rotating when one side is moving toward us and one side is moving away using rotational Doppler effect.
To know more about Doppler effect
https://brainly.com/question/15318474
#SPJ4
Why is sugar solution classified the way it is?
who drink water with no mouth?
Answer: Tree
Explanation: Cause they don't have mouth to drink water they just have root
Distance versus time is plotted and a best-fit line is found to be y = 0.098 x 0.01y=0.098x 0.01. what are the units of the slope 0.098?
The unit of the slope is m/s
Given that y = 0.098x + 0.01
According to slope formula, y = mx + c
Slope, m = 0.098
Slope of the line is equal to the velocity of the object in a distance-time graph. Unit of velocity is m/s.
Therefore, the unit of the slope is m/s
To know more about distance-time graph
https://brainly.com/question/1378025
#SPJ4
A block has a mass of 4.726 g and a volume of 128.9 cm3. calculate the density in g/cm3
The density of the block is 0.036 g / [tex]cm^{3}[/tex]
We know that,
Density = Mass / Volume
Given that,
Mass = 4.726 g
Volume = 128.3 [tex]cm^{3}[/tex]
Density = 4.726 / 128.3 = 0.036 g / [tex]cm^{3}[/tex]
Density is defined as the unit mass per unit volume. It is represented using ρ.
Therefore, the density of the block is 0.036 g / [tex]cm^{3}[/tex]
To know more about density
https://brainly.com/question/15164682
#SPJ4
Your weight is:__________
a. actually your mass.
b. the gravitational attraction between you and the earth.
c. a property of mechanical equilibrium.
d. the same in all locations.
Your body weight is the gravitational attraction between you and the Earth.
What is gravity?Gravity, which means "weight" in Latin, is a basic interaction in physics that causes all objects with mass or energy to attract one another. The electromagnetic force, the weak interaction, and the strong interaction are all significantly stronger than gravity, which is by far the weakest of the four fundamental interactions. As a result, it has no appreciable impact on subatomic particle level phenomena. On Earth, gravity imparts weight to tangible items, and the Moon's gravity creates tides in the oceans. However, gravity is the most important interaction between objects at the macroscopic scale, determining the motion of planets, stars, galaxies, and even light.
To learn more about gravity , visit:
https://brainly.com/question/2888262
#SPJ4
A certain hydrogen spectral line has wavelength 1875 nm when measured in the laboratory. that same line, when measured in a star, has wavelength 1872 nm. what can we say about the star?
The star having wavelength 1872nm is moving toward the earth.
It happens due to the phenomena of Doppler shift. Doppler effect, commonly known as Doppler shift and it is defined as The change is the wavelength or frequency of waves as a result of an observer's motion In relation to the web source.
In visible light it is possible to see the apparent wavelength emitted by stars and galaxies. As a result, a start moving towards the earth appears to emit light with a the short wavelength.
Then the light shows that is static. It is known as blue shift because here spectrum is shifted towards the blue end due to the shortest wavelength.
And when a start goes away from us, it appears that it shifts It's light towards longer wavelength.
This end is referred as redshift because it is closer to the red end of the spectrum.
Add the spectrum of a particular star. Shown that the line appearing at the shortest wavelength is 1872nm in comparison to the laboratory measurement. This shows the same hydrogen line at a greater wavelength 1875.nm results that star is moving towards the Earth.
The star having wavelength 1872nm is moving toward the earth.
To know more about spectral lines.
https://brainly.com/question/15017649
#SPJ4
How many protons, neutrons, and electrons are there, respectively, in an atom of o-17?.
In an atom of O-17, proton and electron is 8, and neutrons is 9.
The atomic number, sometimes referred to as nuclear charge number, of a chemical element is the charge number of an atomic nucleus. For conventional nuclei, this is comparable to the proton number, or the number of protons found in the nucleus of each atom of that element.The atomic number of oxygen is 8. Therefore, an atom needs 8 protons in order to be referred to as an oxygen atom. For instance, an atom will no longer be oxygen if it has 9 protons and will now be fluorine. Any atom that lacks 8 protons is not an oxygen atom. For an atom to be neutrally charged, the number of protons and electrons within it must match. Therefore, there should be 8 electrons in all. However, depending on the isotope, the neutron count can change. An oxygen isotope is a distinct variety of oxygen. For instance, oxygen-15, which has 7 neutrons, is a possibility. The neutron count for oxygen-16 would be 8, for oxygen-17 it would be 9, and so on.Learn more about the quantum mechanics with the help of the given link:
https://brainly.com/question/11855107
#SPJ4
A light-rail commuter train accelerates at a rate of 1.35 m/s2. how long (in s) does it take to reach its top speed of 80.0 km/h, starting from rest?
It takes 16.5 seconds to reach its top speed of 80.0 km/h, starting from rest.
What is Kinematics?A branch of physics called kinematics, which was evolved from classical mechanics, defines how points, bodies, and systems of bodies (groups of objects) move without taking into account the forces that propel them. The discipline of kinematics is sometimes thought of as a subfield of mathematics and is frequently referred to as the "geometry of motion." Any known values of the location, velocity, and/or acceleration of points inside the system are declared as initial conditions for a kinematics issue, together with the geometry of the system. The position, velocity, and acceleration of any unidentified system components can then be calculated using geometrical considerations.
Where [tex]v[/tex] is the final velocity and [tex]v_{0}[/tex] is the initial velocity, we utilize the formula [tex]v = v_{0}+at[/tex] (because the train starts from rest), [tex]a= 1.35\frac{m}{s^{2} }[/tex], [tex]v_{0} = 80.0\frac{km}{h} = 22.22\frac{m}{s}[/tex]
Injecting these into the formula above and calculating t provides us with,
[tex]t= \frac{v-v_{0} }{a}[/tex] ≈ [tex]16.5 s[/tex]
If you want to learn more about kinematics visit: https://brainly.com/question/7590442
#SPJ4
A 2 meter tall vertical stack of firewood casts a 4 meter shadow on horizontal ground. what is the angle of the sun in the horizon?
The angle of the sun in the horizon would be [tex]\theta[/tex] = 26.56°
CalculationHeight of stack of firewood = 2 m
Height of the shadow of firewood = 4m
Then according to trigonometric identities,
tan[tex]\theta\\[/tex] = 2/4
[tex]\theta[/tex] = [tex]tan^{-1}[/tex](1\2)
[tex]\theta[/tex] = 26.56°
What is trigonometry?
The area of mathematics concerned with how triangles' sides and angles relate to one another as well as with the pertinent uses of any angle is called as Trigonometry. This field of study was created in the Hellenistic era in the third century BC as a result of the use of geometry in astronomical research.
To know more about Trigonometry, visit:
https://brainly.com/question/26719838
#SPJ4
8. Determine the density of a cube that has a mass of 40.5g and a volume of 9cm3 .
Answer:
d = 2.70 g/mL
Explanation:
search the next one up on go ogle it will give you an answer i promise
How much would a 15.0kg object weigh on neptune if the acceleration due to gravity is 11.2?
On Neptune, the object weight is 168 newton.
We need to know about the weight to solve this problem. Weight can be measured by multiplying mass with gravitational acceleration. It can be written as
W = m . g
where W is weight, m is mass and g is the gravitational acceleration.
From the question above, we know that the parameter given is:
m = 15 kg
g = 11.2 m/s²
By substituting the parameters, we can calculate the weight.
W = m . g
W = 15 x 11.2
W = 168 N
Find more on weight at: https://brainly.com/question/6384538
#SPJ4
Why would you have to know how to convert measurements when looking at a technical drawing?
1.) When examining technical drawings, conversion of dimensions is crucial knowledge to have. A person with measurement skills may use an object's shape to determine its sides, angles, area, and volume. If he is aware of these factors, he will be able to modify a sketch or design if the need arises.
If someone knows how to convert a measurement to a system that the other person is familiar with, they can do so when working with someone who is unfamiliar with the measuring system.
2.) Units have a crucial role. No meaning is given to numbers without units in scientific computations. For instance, if someone asks a shopkeeper for three rice, the shopkeeper may not grasp what he means, but if he is told that the customer wants three kilograms of rice, the shopkeeper will. Because the value of anything in one system of units may differ from that of the other, you need also be familiar with unit conversion into other systems (Metric, SI). Understanding units in this way can help with numerous issues.
An object or event's attributes are quantified through measurement so that they can be compared to those of other things or occurrences. Therefore, measurement is the process of determining the size or smallness of a physical quantity in relation to a primary reference quantity of a similar kind. The act or system of measuring is referred to as measurement. It can be viewed as a procedure for utilizing numbers to define physical objects. In this post, you can read more about measurement units and conversion.
To learn more about measurement from the given link:
brainly.com/question/2107310
#SPJ9
What is the acceleration of a 10 kg mass pushed 5 n forceushed by a 5n(kg-m/s2) (use gresa method)
The final acceleration of the object is 2 m/[tex]s^{2}[/tex].
In this problem,
Applied force(F) = 10 N
The object’s mass (m) is 5 kg.
Having said that,
An object’s force is equal to the product of its mass and the acceleration it experiences as a result of the applied force.
i.e., Mass + Acceleration = Force (a)
F= m×a
Therefore,
A= F÷m
A= (10÷5) m/sec²
A= 2 m/sec²
Consequently, the object’s acceleration,
A=2 m/sec²
Concept of force and acceleration:
This states that the rate of velocity change of an object is directly proportional to the applied force and moves in the direction of the applied force.
It can be expressed mathematically as force (N) = mass (kg) x acceleration (m/s2). Therefore, an object with constant mass will accelerate in direct proportion to the applied force.
To know more about such acceleration related problems, visit:
https://brainly.com/question/16743612
#SPJ4
Can scientific laws be changed by a vote
Answer:
No.
Explanation:
A sceintific law cannot be changed or modified. It has been proved multiple times.
Answer:
No.
Explanation:
Scientific laws can only be changed if proven wrong. Scientists don't vote on knowledge, they use evidence to prove or disprove theories and laws.
If you subtract vector 3.7 cm at 45° North of East from vector 4.5 cm at 57° West of North using a scale drawing, what is the resultant vector?
The resultant vector is 5.2 cm at a direction of 12⁰ west of north.
Resultant of the two vectors
The resultant of the two vectors is calculated as follows;
R = a² + b² - 2ab cos(θ)
where;
θ is the angle between the two vectors = 45° + (90 - 57) = 78⁰a is the first vectorb is the second vectorR² = (3.7)² + (4.5)² - (2 x 3.7 x 4.5) cos(78)
R² = 27.02
R = 5.2 cm
Direction of the vectorθ = 90 - 78⁰
θ = 12⁰
Thus, the resultant vector is 5.2 cm at a direction of 12⁰ west of north.
Learn more about resultant vector here: https://brainly.com/question/28047791
#SPJ1
If your bathroom scale assesses your weight to be 98, 211, and 167 pounds on successive measurements in the same day, the scale would suffer from low _____ reliability.
The scale that would suffer from low Test-Retest reliability when the bathroom scale assesses on measurements in the same day.
How is reliability determined ?Producing a large number of evaluation-focused questions and randomly dividing them into two sets of questions is the most popular method for gauging the dependability of parallel forms. You determine the correlation between the findings after the same respondents respond to both sets of questions.
A measure's reliability is its constancy. Internal consistency, consistency among things, and consistency across different researchers are the three types of consistency that psychologists take into account (inter-rater reliability).
Because it affects the worth of a psychological test or study, reliability is crucial. Its dependability assures value to the psychology field and other fields where it has importance, such as business or education, if test findings are consistent when researchers undertake a study.
To learn more about reliability , visit
brainly.com/question/24246070
#SPJ4
an asteroid is 180,000km away from the moon on a collision course. how much time will it take before the asteroid is 10km away if it is moving at a constant velocity of 36,000m/s?
Answer:
See below
Explanation:
(180 000 - 10) km / 36 km/s = 4999.7 =~ 5000 seconds = 83 .3 min
The energy driving the global water cycle is provided by:________
a. rotation of the earth on its axis.
b. solar energy.
c. wind.
d. tides.
The energy driving the global water cycle is provided by solar energy.
What is a solar energy?Solar energy is the term for solar radiation, which has the ability to ignite chemical reactions, produce heat, or create electricity. The total solar energy incident on Earth far exceeds both the present and future energy needs of the planet. This highly diffused source might potentially provide all of the energy required in the future if properly harnessed. Due to its limitless supply and lack of environmental impact compared to the finite fossil fuels coal, petroleum, and natural gas, solar energy is predicted to gain popularity as a renewable energy source in the twenty-first century. Although the Sun is a very potent energy source and sunlight is by far the most abundant energy that Earth receives, the intensity of sunlight at the planet's surface is actually rather low.
To know more about solar energy, visit:
https://brainly.com/question/9704099
#SPJ4
Theorem: there is no smallest positive rational number.theorem: there is no smallest positive rational number. a proof by contradiction of the theorem starts by assuming which fact?
Assume there is a smallest rational integer that has the following form: a/b
Then observe that we can define a/(b+1), which is strictly less than a/b because its divisor is bigger and is rational because it is the product of two numbers. Due to the contradiction created by our original claims that a/b is the smallest rational number that is possible, we might conclude that there is no such thing as the smallest rational number.
There can therefore be no smallest rational number because we may always define a smaller rational number than the one we now possess.
What is Rational number ?Any number that can be expressed as a ratio is considered reasonable. It is therefore possible to represent it as a fraction when the numerator and denominator are both full numbers.
Learn more about Rational number here:
https://brainly.com/question/12088221
#SPJ4
How many years would it take to reach the planet saturn travelling at 21 thousand miles per hour? enter your answer with 2 decimal places.
It would take about 4.8 years to travel from earth to Saturn.
How long would it take?We know that speed is expressed as the ratio of distance to time. In this case, we are trying to know ow many years would it take to reach the planet Saturn travelling at 21 thousand miles per hour.
Given that;
Speed = 21 thousand miles per hour
time taken = ???
Distance = 887 million miles
Speed = distance/time
speed * time = distance
time = distance/speed
time = 8.87 * 10^8 miles/2.1 * 10^4 miles per hour
time = 4.22 * 10^4 hours
If 8.766 * 10^3 hours make 1 year
4.22 * 10^4 hours make 4.22 * 10^4 hours * 1 year/8.766 * 10^3
= 4.8 years
Learn more about Saturn:https://brainly.com/question/12181523
#SPJ1
When you stand at rest on a pair of bathroom scales, the readings on the scales will always?
Weight is the the gravitational force of the total body mass in the gravitational field. We can feel our weight due to the earth's normal reaction to the weight.
Gravitational force is the kind of attractive force between any two bodies is directly proportional to the product of their masses and inversely proportional to the square of the distance between them.
Therefore when we stand at rest on a pair of bathroom scales, the readings on the scales will always reads the same as the actual weight of our body.
To know more about gravitational force,
https://brainly.com/question/5599230
#SPJ4
A resistor carries 0.40 a when connected to a 9.0-v battery. what is theresistance of the resistor?
The resistance of the resistor which carries 0.40 a when connected to a 9.0-v battery is 22.5 ohm
Given:
current of resistor = 0.40 A
voltage of resistor = 9.0 V
To Find:
the resistance of the resistor
Solution: Resistance of a resistor with current I and voltage V is defined as the ability of the element to resist the flow of current through it. It's SI unit is V/A or ohm. Ohms () are used to express resistance values. Electricity will flow from high to low when two terminals have an electron difference. That flow is countered by resistance. The current decreases as resistance increases. Conversely, the higher the current, the lower the resistance.
Voltage = Current x Resistance
Resistance = Voltage/Current
Resistance = 9 V/0.40 A = 22.5 ohm
Hence, the resistance of the resistor is 22.5 ohm
Learn more about Resistance here:
https://brainly.com/question/24858512
#SPJ4
About how many days must elapse between first-quarter moon and the next full moon in the same cycle?
About 29.5 days must elapse between first-quarter moon and the next full moon in the same cycle.
What do you mean by the phases of the Moon?The different ways the Moon appears to Earth over the course of about a month are known as its phases. The side of the Moon that faces the Sun will be illuminated as it revolves around the Earth. The various forms of the illuminated region of the Moon that can be observed from Earth are referred to as their phases. Every 29.5 days, a new phase begins. Due to tidal locking, the same half of the Moon always faces the Earth. The same half of the Moon's surface will therefore always be covered by the phases.
To learn more about the moon, Visit:
https://brainly.com/question/13435421
#SPJ4
Was fired for ________ after it was determined he had been inflating his production reports each quarter.
Was fired for Workplace cheating after it was determined he had been inflating his production reports each quarter.
What are production reports?The document that is filled out each day during the production of a movie or television show to recap what happened that day is known in the film industry as a "production report" (abbreviated "PR"). Each show often uses a unique template for a production report, which is frequently made before production even starts by one of the assistant directors. There is no standard format for a production report ("AD"). Apart from minor variations, most forms include the same data and are basically a collection of blank Excel tables that are printed double-sided on a legal-sized (8 x 14 inch) piece of paper. This form is used to keep track of a production's progress and costs as well as to calculate the cast and crew's respective salaries.
To know more about production reports, visit;
https://brainly.com/question/14276672
#SPJ4
Chebyshev's theorem states that the proportion of values is at least 1-1/k2. what is the meaning of k?
k is the number of standard deviations greater than one that that proportion of observations will be discovered within.
What does Standard Deviation mean?A standard deviation measures the spread of data in relation to the mean.
A low standard deviation suggests that the data is concentrated around the mean, whereas a high standard deviation shows that the data is spread.
A standard deviation near 0 suggests that data points are close to the mean, whereas a high or low standard deviation indicates that data points are above or below the mean, respectively.
The curve on top of Image 7 is more spread out and hence has a higher standard deviation, whereas the curve below is more grouped around the mean and thus has a smaller standard deviation.
To learn more about standard deviation, visit:
https://brainly.com/question/16555520
#SPJ4
A solid block of metal is at its melting temperature. it takes 24j to melt 6kg of a metal. what is the latent heat of fusion of the metal?
The Latent heat of fusion is also known as the Enthalpy of Fusion. It is a kind pf change in enthalpy.
Brief explanation of Latent Heat of Fusion?The latent heat of fusion, is the change in enthalpy that takes place when energy, typically heat, is provided to a specific quantity of a substance to causes it to change from a solid state to a liquid state at a constant pressure.
For instance, 1 kilogram of ice melts at 0 °C at a variety of pressures, absorbing 333.55 kJ of energy without causing a change in temperature.
The heat of solidification, which occurs when a substance changes from a liquid to a solid, is equal and opposing.
This energy includes the contribution necessary to displace its surroundings against ambient pressure in order to accommodate any corresponding change in volume.
The melting point or the freezing point, depending on the situation, is the temperature at which the phase transition takes place. Conventionally, unless otherwise stated, the pressure is taken to be 1 atm (101.325 kPa).
CalculationThe formula of latent heat of fusion is L= q/m
Here q is the heat provided and m is the mass of the object.
So, L = 24j/6kg
L= 4j/kg
So, the latent heat of fusion is 4 j/kg
To know more about latent Heat of Fusion visit:
https://brainly.com/question/28044951
#SPJ4
The fact that the lunar phases repeat on the same solar dates about every 19 years (the metonic cycle) can be used to __
The Metonic cycle is a period of almost exactly 19 years after which the lunar phases recur at the same time of the year.
The Metonic cycle is defined as ,235 synodic months is just 2 hours, 4 minutes and 58 seconds longer than 19 tropical years.
In Athens, at 5th century BC, give the cycle to be a whole number of days, 6,940. Using these whole numbers facilitates the construction of a lunisolar calendar.
A tropical year is longer than 12 lunar months and shorter than 13 of them. The arithmetic representation of 12×12 + 7×13 = 235 allows it to be seen that a combination of 12 "short" years (12 months) and 7 "long" years (13 months) will be almost equal to 19 solar years.
To know more about lunar phases
https://brainly.com/question/17749647
#SPJ4
Can and object have a negative position and a positive velocity? Or vice versa, a positive position and a negative velocity? Explain your reasoning, do not just give a simple sentence answer.
Ph=4.390 write the henderson-hasselbalch equation for a propanoic acid solution (ch3ch2co2h, pka=4.874). 4.390
Answer:
a) [A⁻]/[HA] = 0.227b) [A⁻]/[HA] = 0.991c) [A⁻]/[HA] = 2.667Explanation:In the Henderson-Hasselbalch equation, HA stands from an acid an A⁻ stands from its conjugate base, as follows:CH₃CH₂CO₂H = HACH₃CH₂CO₂⁻ = A⁻pH = pka + Log [A⁻]/[HA]pH = 4.874 + Log[CH₃CH₂CO₂⁻]/[CH₃CH₂CO₂H](a) 4.23 = 4.874 + Log [A⁻]/[HA]-0.644 = Log [A⁻]/[HA] = [A⁻]/[HA]0.227 = [A⁻]/[HA](b) 4.87 = 4.874 + Log [A⁻]/[HA]-0.004 = Log [A⁻]/[HA] = [A⁻]/[HA]0.991 = [A⁻]/[HA](c) 5.30 = 4.874 + Log [A⁻]/[HA]0.426 = Log [A⁻]/[HA] = [A⁻]/[HA]2.667 = [A⁻]/[HA]
Explanation:
