The average rate of disappearance of i - between 1200.0s and 1600.0s
is 2.0 × 10⁻⁵ m/s.
What is the formula to calculate the average rate?To determine the slope of a graphed function, use the average rate of change formula. Divide the change in y-values by the change in x-values to determine the average rate of change.
The rate of disappearance for reactants is a positive (+) value. Because products are being made rather than disappearing, their rate of disappearance (-) is negative.
The average rate of reaction = Change in concentration
Time rate ( r ) = Δx Δt.
Sign of average rate of reaction: The average rate falls as the rate of reactant concentration increases.
There will be a bad response. The average rate of reaction will be positive as the rate of product concentration rises.
The average rate of disappearance of i - between 1200.0s and 1600.0s
is 2.0 × 10⁻⁵ m/s.
Therefore, the correct answer is option C) 2.0 × 10⁻⁵
The complete question is:
The peroxydisulfate ion (S₂O₈²⁻) reacts with the iodide ion in an aqueous solution via the reaction:
S₂O₈²⁻ (aq) + 3I⁻ → 2SO₄ (aq) + I₃⁻ (aq)
An aqueous solution containing 0.050 M of S₂O₈²⁻ ion and 0.072 M of I⁻ is prepared, and the progress of the reaction is followed by measuring [I⁻]. The data obtained are given in the table below.
Time (s) 0.000 - 400.0 - 800.0 - 1200.0 - 1600.0
[I⁻] (M) 0.072 - 0.057 - 0.046 - 0.037 - 0.029
The average rate of disappearance of I⁻ between 1200.0 s and 1600.0 s is ________ M/s.
A) 1.8 × 10⁻⁵
B) 1.2 × 10⁻⁵
C) 2.0 × 10⁻⁵
D) 5.0 × 10⁴
E) 1.6 × 10⁻⁴
To learn more about the average rate of disappearance refer to:
https://brainly.com/question/14477981
#SPJ4
If the volume of the cylinder is to be calculated, what would be the total standard deviation of the volume?
first calculate the partial derivatives of the two fromulas for each measured variable. Then you calculate the sum of the products of the errors (Dr, DR, and dh) with the squared corresponding partial derivative.and or the deviation
Example for the length of the mantle:
dm/dR = (R-r)/root(w)
dm/dr = -(R-r)/root(w)
dm/dh = h/root(w)
where w = (R-r)²+h². The squared derivatives are
(dm/dR)² = (R-r)²/w
When it comes to statistics and probability theory, standard deviation is used. It demonstrates the accuracy of your data and is used to measure both variability and diversity.
Standard deviation is calculated by taking the square root of the variance. In contrast to a high standard deviation, which indicates that the entered data points are most likely farther from the mean, a low standard deviation indicates that the entered data points are most likely closer to the mean
to learn more about deviation:
https://brainly.com/question/16555520
#SPJ4
A measure of central tendency called the _____ can be a particularly biased or misleading measure of central tendency when there are a few extreme scores.
A measure of central tendency called the mean can be a particularly biased or misleading measure of central tendency when there are a few extreme scores.
"The statistical metric that identifies a single value as representative of an entire distribution" is the definition of central tendency. It strives to give a precise account of all the facts. It is the lone value that best typifies or reflects the information gathered.
The mean, median, mode, and the midrange are the four indicators of central tendency. The arithmetic mean of the maximum and minimum values in a data set is used here to describe the midpoint or mid-extreme of a set of statistical data values.
A dataset's arithmetic mean (which is distinct from its geometric mean) is calculated by dividing all of the values by the total number of values. Due to the fact that the computation takes into account all values, it is the most widely used central tendency measure.
Learn more about measure of central tendency:
https://brainly.com/question/17631693
#SPJ4
Match each problem with the correct utility.
the computer is running slowly
sensitive information is not secure
sending a large video file through email
computers in a small business that can't share
information
:: SOHO
:: compression utility
III I
:: encryption :: defragmentation utility
An encryption can be defined as a form of cryptography and it typically involves the process of converting or encoding information in plain text into a code, known as a ciphertext. Generally speaking, an information or data that has been encrypted it can only be accessed and deciphered by an authorized user.
This ultimately implies that, an encryption simply refers to a utility which can be used by an end user to to secure his or her sensitive information from unauthorized access or theft by a hacker (attacker).
In Computer programming, some examples of encryption algorithms include the following:
3DESAESRC4RC5RSAIn Computer technology, a defragmentation utility helps to reorganize (rearrange) the data stored on a disk drive and as such, it would make a computer system to run faster. Also, a compression utility is a type of utility which can be used to reduce the size of a large video file that is to be sent through an email.
Read more on defragmentation utility here: https://brainly.com/question/14237107
#SPJ1
According to einstein’s theory of relativity, what happens to the mass of an object as the object approaches the speed of light?
When an object approaches the speed of light then the he objects mass become infinite.
Einstein theory of relativity is actually fairly simple. It is based on two very simple ideas.
Principle of relativity. Principle of constancy of lightspeed.relativity describes the situation when.
Either body is moved at a speed close to that of the light. Or gravity is very very strong. Or both.in these cases Newtonian theory does not work.
But when the speed are much slower than light. And gravity is not too strong. At that point relativity and Newtonian theory are exactly the same.
the mass of an object becomes infinite as the object approaches the speed of light .
To know more about theory of relativity.
https://brainly.com/question/14605604
#SPJ4
Explain briefly the trnsmission of radio waves
Answer: A radio wave is generated by a transmitter and then detected by a receiver. An antenna allows a radio transmitter to send energy into space and a receiver to pick up energy from space. Transmitters and receivers are typically designed to operate over a limited range of frequencies.
Explanation:
Describe one way to decide whether a sample of matter is a substance or a mixture
One way to decide whether a sample of matter is a substance or a mixture is by either finding its boiling (liquid) or melting (solid) point.
A substance has a constant boiling/melting point whereas a mixture has different boiling/melting points.
A substance is an element or a compound that cannot be separated using physical or chemical properties. A mixture is made up of two or more compounds which can be separated using physical or chemical properties.
Therefore the easiest way to decide whether a sample of matter is a substance or a mixture is by either finding its boiling (liquid) or melting (solid) point. If after multiple test the result is same it is a substance and if it is different it is a mixture.
To know more about substances and mixtures
https://brainly.com/question/1371053
#SPJ4
You ride your bike at a constant speed of 5 for 300 a from your house to the mailbox What was your acceleration for the trip? (1 point)
00
05
O 300 s
Since the speed is the same through out, acceleration for the trip will be zero.
What is Acceleration ?Acceleration is the rate at which velocity is changing. It is a vector quantity.
If you ride your bike at a constant speed of 5 m/s for 300 s from your house to the mailbox, your acceleration for the trip will be equal to zero.
Because Acceleration = Change in speed ÷ time
Since the speed is constant, acceleration = 0/time = 0
Therefore, the acceleration for the trip is zero.
Learn more about Acceleration here: https://brainly.com/question/14344386
#SPJ1
Answer:
0 m/s^2
Explanation:
No change in speed or direction = constant velocity = no acceleration.
Which has zero acceleration?
a. at rest.
b. moving at constant velocity.
c. in mechanical equilibrium.
d. all of these
e. none of these
At rest, when travelling at a constant speed, and when in mechanical equilibrium, there is no acceleration and answer choice D is correct.
How would you define acceleration?In mechanics, acceleration describes the rate at which a driving object's velocity changes over time. They are accelerations and vector quantities. The direction of an object's acceleration is determined by the direction of the net force acting on it. Depending on whether an object is moving faster, slower, or in a different direction, its velocity may change. Examples of acceleration include a falling apple, the moon orbiting the earth, and a car that has stopped at a stop sign. The car is positively accelerating if the speed is increasing. As the car slows down, its speed decreases. A decline in speed is referred to as negative acceleration. In both situations, the car is traveling ahead, yet one has a positive acceleration and the other a negative one.
To learn more about acceleration, click here:
https://brainly.com/question/2303856
#SPJ4
PLEASE HELP, i really need the help because i dont understand
The y-component of the vector is 4.97 m.
What is a vector?A vector is a quantity that has both magnitude and direction.
To calculate the y-component of the vector in the diagram above, we use the formula below.
Formula:
Y = Hcos∅.......... Equation 1From the question,
Given:
H = 22.3 m∅ = 77.1°Substitute these values into equation 1
Y = 22.3(cos77.1)Y = 22.3×0.223Y = 4.97 m.Hence, the y-component of the vector is 4.97 m.
Learn more about vectors here:https://brainly.com/question/25705666
#SPJ1
An object is 10 cm away from a plane mirror. How far is the object from its image.
Answer:
20cm
It is one of the characteristics of a plane mirror that, the distance of the plane mirror from the object is equal to its distance from the image. Therefore, given distance between object and mirror = 10cm. Distance between mirror and image = 10cm. Thus, the distance between object and image = 10 + 10 = 20cm.
Explanation: :0
A car is decelerating at the rate of 3 km/s 2. if its initial speed is 66 km/s, how long will it take the car to come to a complete stop?
The car with an initial speed of 66 km/s will come to a complete stop at 22 s
The formula for Uniformly varied rectilinear motion (UVRM) and procedure we will use to solve this exercise is:
t = (vf - vi) /a
Where:
vf = final velocityvi = initial velocityt = timea = accelerationInformation about the problem:
vi= 66 km/svf = 0 m/sa= - 3 km/s2t = ?Applying the time formula, we have:
t = (vf - vi) /a
t = (0 m/s - 66 km/s) / - 3 km/s2
t = (- 66 km/s) / - 3 km/s2
t = 22 s
What is acceleration?It is a physical quantity that indicates the variation of velocity as a function of time, it is expressed in units of distance per time squared e.g.: m/sec2 ; km/h2
Learn more about acceleration at: brainly.com/question/14344386
#SPJ4
During the resting phase, what is the electric potential energy of a typical na ion outside of the cell?
During the resting phase, −80 mV is the electric potential energy of a typical Na ion outside of the cell
What do you understand by electric potential energy ?The power required to move a charge in opposition to an electric field is known as electric potential energy. A charge must be moved through a stronger electric field with more energy, but it also must be moved through a weaker electric field with more energy.
You cannot see the charge that is waiting to pass through the wires when a light switch is off. That is but one illustration of electric potential energy. Other instances include: a switched-off incandescent light bulb.
To learn more about the electric potential energy, visit: https://brainly.com/question/24043857
#SPJ4
Observations and inferences are important in science. How would you explain the difference between these two words?
Answer:
The difference between observations and inferences is observations uses one or more of your five senses to know or determine something. However, inferences are where you make an explanation for the observation. For example, you see steam rising off a coffee cup ( this is an observation). The coffee is hot ( this is an inference).
The four phases of matter include all of the following except _____.
a. water
b. gas
c. liquid
d. plasma
e. solid
The correct answer is option A. Water is not a state/ phase of matter
What are the states of matter?States are those phases that describe its physical attributes as well as how its constituent particles are arranged. Solid, liquid, gas, and plasma are the four main states of matter that can exist.
When something melts, it transitions from a solid to a liquid condition.
Water has a freezing point of 0°C.The melting point of flour is around 220 degrees Celsius, which is greater than that of salt and sugar. Sublimation is the process by which a solid transforms into a gaseous state, as in the case of camphor. Examples of changes in the states of matter include the melting of ice, the freezing of water, the burning of camphor, the melting of wax, and the production of precipitates.
To know more about the states of matter visit:
https://brainly.com/question/19746836
#SPJ4
Which of the solvents given is not commonly used for acquiring a 1h nmr spectrum?
The solvents that are not commonly used for acquiring a 1H NMR spectrum are the ones that contain [tex]^{1} H[/tex] nuclei.
[tex]^{1} H[/tex] NMR is also called as Proton Nuclear Magnetic Resonance. It is a method used to determine the structure of molecules of a substance.
For this [tex]^{1} H[/tex] NMR to work perfectly, the solvents must not contain [tex]^{1} H[/tex] nuclei. That is why Deuterated solvents are used. Some of the examples of deuterium solvents are chloroform, dimethyl sulfoxide, heavy water, etc.
Therefore, the solvents that are not commonly used for acquiring a 1H NMR spectrum are the ones that contain [tex]^{1} H[/tex] nuclei.
To know more about Deuterated solvents
https://brainly.com/question/15228046
#SPJ4
What is the maximum number of comparisons that a binary search should do for a sorted array of 81,014 elements ?
The maximum number of comparison is 4502
Binary array : it is an array consist of only 0s and 1s only.
Binary search - an efficient algorithm for finding items from a sorted list.
it is called binary because it divide array into tow halves.
It is used to excess data more faster when the space is tight.
binary search will search the array by dividing it into two halves till it find the value.
The main advantage of it is that is more quicker than a serial search.
binary search algorithm can be implemented in the two ways :
1. Iteration method
2. Recursive method
the maximum number of comparisons is 4502.
To know more about binary array :
https://brainly.com/question/28346440
#SPJ4
If the device produces 8.5 kw of power on a day when the waves are 1.4 m high, how many kilowatts will it produce when they are 0.625 m high?
The power generated by 1.4 m high waves is 1.69 kW.
We need to know about power to solve this problem. The power generated by waves can be determined as
P = 1/2 . μ . ω² . A² . v
where P is power, μ is the constant of wave media, ω is angular speed, A is amplitude and v is wave speed.
Power is proportional to amplitude squared. Hence
P ~ A²
From the question above, we know that
P1 = 8.5 kW
A1 = 1.4 m
A2 = 0.625 m
By using the ratio of power, we can write
P1 / P2 = A1² / A2²
8.5 / P2 = 1.4² / 0.625²
P = 1.69 kW
Find more on power at: https://brainly.com/question/25263760
#SPJ4
You accidentally drop an eraser out of the window of an apartment 15 m above the groun
e. How long will it take for the Eraser to reach the ground?
Answer:
1.8 seconds
Explanation:
Ignoring air friction
d = 1/2 at^2
15 = 1/2 (9.81) t^2 shows t = 1.75 = 1.8 seconds
Find the weighted average of a data set where 10 has a weight of 3, 40 has a weight of 5, and 50 has a weight of 2.
Answer:43
Explanation: 30,30,40,40,40,50,50,50,50,50
When leak channels are present, why does a capacitive current flow in the reverse direction after the stimulus current has ended?
Capacitor always needs a resistive path to charge or discharge.
Suppose the capacitor is charging through the path R1 and its current flow direction is also shown as per the figure.
Now suppose fully charged capacitor is disconnected from the circuit, hence there will be no current flow out from the capacitor.
But practically ideal capacitors do not exist, there must have some leakage paths suppose R2 and i2.
Therefore, we can see that i1 was entering to C but i2 was leaving C. Hence Capacitive current flow is in reverse direction.
To know more about capacitive current, visit:
https://brainly.com/question/22706237
#SPJ4
Heat energy has to do with the energy contained within a system
true or false
science
Answer: The statement is false.
Explanation:
Although adding heat energy to a system raises its temperature, that isn't always the scenario. When you heat water, for example, the temperature rises, but when you heat it to 100 degrees Celsius, the state of the water changes while the temperature stays the same.
If the bar oa is rotating clockwise with a constant velocity and the collar slides freely, the direction of the reaction force on the collar will be:_______
The direction of the reaction force on the collar will be Non constrained motion direction .
What is the relationship between the magnitude of the angular velocity ω and that of the velocity v ?ω = v / r
Since the cylinder is wrapped about the string, it rolls without slipping with respect to the string. The constraint relationship to assure this kind of motion can be obtained by considering the relative velocity of the point on the cylinder that is in contact with the string with respect to the string it should be zero.
The velocity of the center of the cylinder,
v = dy (t) / dt, r and the rotation rate of the cylinder, ω
We have to first find the velocity of the contact point relative to the center of the cylinder. Since this ignores the translational motion of the entire cylinder with respect to the ground, we then need to add back in the cylinder's center of mass velocity to find the velocity of the contact point with respect to the ground.
So, v (contact) = ωr - v where,
ω is the angular velocity
v is the linear velocity
r is the radius
ω = v / r
To learn more about velocity , visit :
https://brainly.com/question/15305930
#SPJ4
Which persuasive writing strategy involves quoting a consumer, who is satisfied with a specific product or service, in a news release?
In a news release, using a consumer who is happy with a particular good or service as a testimonial might be persuasive.
What do you understand by consumer?Consumers are described as people or organizations who utilize or consume goods and services. Customers might be consumers or exist solely as customers; they are the buyers of products and services inside the economy.
Businesses may select how to promote their goods and services most effectively by comprehending how consumers think, feel, and make decisions. This aids in predicting consumer behavior and helps marketers promote their already-available goods and services.
Consumer behavior is the study of how consumers choose things based on their needs, wants, and desires as well as how they purchase and utilize them.
To learn more about the consumer, Visit: https://brainly.com/question/28215693
#SPJ4
Isotopes share a(n) ____________ but differ in atomic mass because they have different numbers of neutrons.
Isotopes share the same atomic number but differ in atomic mass because they have different numbers of neutrons.
What are isotopes?Isotopes are two or more atom types that share the same atomic number (number of protons in their nuclei), location in the periodic table, and chemical element but have distinct nucleon numbers (mass numbers) as a result of having a different number of neutrons in their nuclei. The term isotope is derived from the Greek roots isos and topos, meaning "the same place," and refers to the fact that multiple isotopes of a single element occupy the same position on the periodic table, even though they have somewhat different atomic weights and physical properties.
To learn more about isotopes, visit:
https://brainly.com/question/364529
#SPJ4
What branch of science is the system-
atic study of God's physical creation
and how it works?
Answer:
Physical science
Explanation:
What is one important difference between the glyoxylate cycle and the citric acid cycle?
The major difference is the cleavage of isocitrate by isocitrate lyase, resulting in succinate and glyoxylate, as opposed to the breakdown of isocitrate by isocitrate dehydrogenase.
What is glyoxylate cycle?A variant of the tricarboxylic acid cycle called the glyoxylate cycle is an anabolic mechanism that may be found in fungus, bacteria, protists, and plants. In order to synthesize carbohydrates, acetyl-CoA is converted to succinate in the glyoxylate cycle. When simple sugars like glucose or fructose are not available, the glyoxylate cycle in microorganisms enables cells to employ two carbons (C2 molecules) like as acetate to meet cellular carbon needs. Animals are often thought to lack the cycle, with the exception of nematodes during the early stages of embryogenesis.
To know more about glyoxylate cycle, visit;
https://brainly.com/question/15724553
#SPJ4
An object that is dropped from a height H falls with a constant acceleration of g. The final
speed, v, just before it reaches the ground can be expressed as v = sqrt(2gh). By how much does the height need to change double the final velocity?
The height has to change by a factor of 1.
What is the height?We can obtain the height from which the object falls using the equations of kinematics under gravity. We can see that the object was dropped from a height thus u = 0 m/s.
We can the write;
v= √2gh
h1 = v^2/2g
When the final velocity is doubled, we have;
2v= √2gh
h2 =4v^2/2g
h2 = 2v^2/g
The height changes by;
2v^2/g - v^2/2g = v^2/g
Thus the height has to change by a factor of 1.
Learn more about height of an object:https://brainly.com/question/14451550
#SPJ1
While passing a slower car on the highway, you accelerate uniformly from 17.5 m/s to 29.5 m/s in a time of 11.1 s. how far do you travel during this time?
When I accelerate uniformly from 17.5 m/s to 29.5 m/s in a time of 11.1 s, I travel 260.85 m
The formula for Uniformly varied rectilinear motion (UVRM) and procedure we will use to solve this exercise is:
x = [(vi + vf) /2] * t
Where:
x = distancevf = final velocityvi = initial velocityt = timeInformation about the problem:
vi= 17.5 m/svf = 29.5 m/s t = 11.1 sx= ?Applying the distance formula, we have:
x = [(vi + vf) /2] * t
x = [(17.5 m/s + 29.5 m/s ) /2] * 11.1 s
x = [(47 m/s ) /2] * 11.1 s
x = (23.5 m/s) * 11.1 s
x = 260.85 m
What is acceleration?It is a physical quantity that indicates the variation of velocity as a function of time, it is expressed in units of distance per time squared e.g.: m/sec2 ; km/h2
Learn more about acceleration at: brainly.com/question/14344386
#SPJ4
diagram for terrestial weather
The correct answer of terrestial weather:
The solar insolation in the visible and infrared regions of the solar electromagnetic spectrum is much more than the energy that space weather occurrences release into the troposphere and stratosphere. Despite claims to the contrary, there may be some connection between the Earth's climate and the 11-year sunspot cycle. There is no proof of this. For instance, it has frequently been suggested that the Maunder minimum, a 70-year period almost devoid of sunspots, is correlated to a cooler climate, but these correlations have vanished after further research. Changes in cosmic ray flux are hypothesized to affect how much cloud formation occurs.
To learn more about weather refer the link:
https://brainly.com/question/9662539
#SPJ9
A small cube of metal measures 15.2 mm on a side and weighs 17.9 g. what is the density of the metal in g/cm3?
The density of the metal is 5.096 g/cm^3
CalculationWeight of the metal W = 17.9g
Length of the cube of metal = l = 15.2 mm = 1.52 cm
Density = w/v
= w/l*l*l
= 17.9 / (1.52)^3
= 17.9 / 3.512
= 5.096 g/cm^3
The Density = 5.096 g/cm^3
What is Density?Density is a measurement that is seen as one that compares the amount of matter an object has to its volume. The density of a substance indicates how dense it is in a given area.
Density can be formulated as:
D = mass / volume
To know more about density, visit:
https://brainly.com/question/15164682
#SPJ4
