The supplemental restraint system is automatically deployed in cases of collison on other increase passenger safety. Hence, Technician B is right.
The supplement restraint system is a presssure filled airbag which automatically inflates and slowly deflates whenever there is a collision worthy of deployment. These cushions the effect of the collison on the passenger as it acts as barrier between the passenger and the object which the passenger's body could hit during collison.Therefore, the SRS acts to cushion the effect of injuries during accident and does not prevent accident.
Learn more :https://brainly.com/question/1378025
qué pasaría si todas las personas en este país tuvieran derechos pero no obligaciones?
Answer:
el país se volvería corrupto
Explanation:
What do safegaurding devices do to protect the worker
¿Qué impactos genera el proceso de la transformación de la caña de azúcar en diversos productos tales como azúcar, alcohol, alimentación animal entre otros?
Answer: The environmental impacts of agricultural activities are, in general, slight, quite dependent on little controllable factors (rains, temperatures, ...
Explanation:
Powder actuated tools have the power of a
dangerous.
and can be very?
Answer:
Powder-actuated tools drive studs by power from an explosive charge. Their operation is similar to a firearm and they can be just as dangerous if used carelessly. You also could be risking your life and the lives of others if you attempt to use this tool without proper instruction.
Explanation:
Hope This Helps!
in alternating current, how often does the current alternate between negative and positive?
Answer:
AC voltages alternate/cycle, at a rate of 60 times each second.
What’s the most important benefit of maintaining a neutral posture
one coil is placed on top of another. the bottom coil is connected in series to a battery and a switch. with the switch closed, there is a clockwise current in the bottom coil. when the switch is opened, the current in the bottom coil decreases abruptly to zero. what is the direction of the induced current in the top coil, as seen from above while the current in the bottom coil decreases?
Answer:
eeue ejenhelp
Explanation:hddund ddn help
Select the correct answer. Which physical quantity measures the rate at which an object’s velocity changes?
A. force
B. speed
C. acceleration
D. torque
Answer:
I think answer is Force.
Answer:
answer is C
Explanation:
just did the work
What is the general equation for calculating sensible heat change of fluids?
Answer:
The phase shift between the solid, liquid and gas is relevant to the latent heat. The sensible heat formula is used to calculate the flow of air in the electric furnace. The sensible heat formula with a change in temperature is expressed as Q sensible= 1.10 x cfm x (to – ti)
Explanation:
Select the correct answer
Which raw material would allow for the mass production of cheap, disposable camera bodies?
A.
aluminum
B
ceramic
C.
thermoplastic
D.
thermosetting plastic
Help plz!!!
Answer:
thermoplastic
Explanation:
because thermo plastic is cheap disbosible camra bodies
Individual/organizations who are responsible for monitoring, verifying, and sometimes certifying various aspects of the construction process including verifying that the regulations are being followed. These individuals are usually independent of the General Contractor.
The project or the site manager is responsible for monitoring or verifying the aspects of the construction process.
The site or the project manager is the individual that is responsible for the adherence to quality and guidance on the construction site.
The site or project manager has the following tasks
ensuring safety on the siteMonitoring the progress or the work that is being doneSourcing materialsSolving problemsIn conclusion, the project manager monitors and verifies aspects of the construction process.
Read more on https://brainly.com/question/24887827?referrer=searchResults
In case of Raymond pile
A. lengths vary from 6 m to 12 m
B. diameter of top of piles varies from 40 cm to 60 cm
C. diameter of pile at bottom varies from 20 cm to 28 cm
D. thickness of outer shell depends upon pile diameter
E. all the above.
Answer:
E. all the above.
Explanation:
2. A used car needs a wheel alignment. Which --
technician would usually complete this operation?
(A) Engine technician.
B) Steering and suspension technician.
(C) Wheel technician.
(D) Brake technician.
Answer:
B
Explanation:
This is because that steering and suspension technician has a prior knowledge of stunting when driving and know s the surface to volume ratio of the car
which of the following companies is the easiest type to set up
Answer:
gogle hi
Explanation:
Bree is on step 6 of a lab with 7 steps and is a little confused by the wording in the instructions. What should she do?
PLS HELP ME!!
Answer:
okay i think she can analysis the words and take her time to know what it means
A device that transforms electrical energy to mechanical:
Answer:
electric motor
*** brainly if possible
Explanation:
There are three different types of slings. What determines which type you use?
Select the 2 answer options that apply.
The type of load
Environmental factors
The type of crane
Answer:
I think answer is The type of load, Environment factors
Your muscles and myofascial slings are made up of many soft tissue types, such as ligaments, fascia, and muscles, which are related to one another to give stability and mobility. Thus option A,B is correct.
What are the different types of slings?Chain slings, wire rope slings, and polyester slings are the three primary categories of lifting slings that you can select from. To find out which lifting sling will work with your lifting equipment, scroll down to view their differences.
An injured body part can be supported and immobilized with the help of a sling. Various wounds can be treated with slings.They are most frequently applied to arms, elbows, and shoulders that have been broken (fractured) or dislocated.
Therefore, When muscles contract, these components work together to move the body.
Learn more about slings here:
https://brainly.com/question/26156369
#SPJ6
A weather map of the United notes. The following are shown on the map: major cities with high and low temperatures; high and low pressure systems; types of precipitation, fronts.
Identify information from a weather service map that is missing from this newspaper weather map. Select two options.
isobars
isotherms
fronts
temperatures
high and low pressure areas
areas of precipitation
Answer:
a and b
Explanation: just did it
Answer:
correct
Explanation:
electricity causes what percent of deaths in the workplace
Explanation:
Contact with / exposure to electric current accounted for 3% of all fatalities in 2019, maintaining the same percentage as in 2018. Electrical fatality rates were 0.11 fatalities per 100,000 workers, the rate for all fatalities was 3.6 per 100,000 workers in 2019.
interstate highways are identified on signs with what kind of shape?
Answer:
Interstate signs are a shield shape, with the word “Interstate” on the top of them. This sign is found at large intersections and may be accompanied by arrows or the direction. White numbers on a blued background and a red line along the top.
What would the circuit resistance be if a 7.5 Amp draw was present with the engine running and the charging system producing 15 Volts
Physical properties of minerals
Most minerals can be characterized and classified by their unique physical properties: hardness, luster, color, streak, specific gravity, cleavage, fracture, and tenacity.
- BRAINLIEST answerer ❤️✌
Which image represents a disadvantage of living near the sea?
Three men carrying nets into the sea.
An outrigger sitting on the sand.
A house that has collapsed into the sea.
Answer:
Hey mate....
Explanation:
This is ur answer....
• A house that has collapsed into the sea.(Because this is the only sentence that sounds DANGEROUS!)
Hope it helps!
Brainliest pls!
Follow me! ◇
Answer: C) A house that has collapsed into the sea.
Explanation:
in which year did the industrial revolution begin in england with the invention of the steam engine?
Answer:
1698
Explanation:
The year the industrial revolution begin in England with the invention of the steam engine was 1760.
The Invention of steam engine in England.James Watt, another Scottish engineer, played a crucial role in improving the efficiency of the steam engine. In the late 18th century, Watt made significant modifications to the design, including the addition of a separate condenser and a governor to regulate steam flow. These improvements made the steam engine much more efficient and practical for a wide range of applications beyond mining, such as powering factories and locomotives.
Watt's improvements, combined with subsequent innovations by other engineers, helped usher in the Industrial Revolution, which transformed England and eventually the world. The steam engine became a fundamental technology for powering machinery, revolutionizing transportation, and driving economic growth.
Learn more about England industrial revolution here
https://brainly.com/question/13906725
#SPJ2
What is placed as the first step in the scientific method?
How did the engineers plan and carry out investigations so they were experiencing the same conditions the astronauts were facing?
Answer: Apollo 13 was the seventh mission in the Apollo space program by the united states with a crew onboard and the third meant to land on the Moon. The craft was launched from Kennedy Space Center on April 11, 1970, but the landing on moon was aborted
Explanation:
which symbol would alert you that the air pressure in a tire is outside the manufacturer recommend psi?
Answer:
Explanation:
J is between H and K. If HJ=6x-5, JK=4x-6 and KH= 129, find the value of HJ
The sign that shows that the air pressure is outside the manufacturer recommend psi is a cup with an exclamation mark.
What is a tire?A tire is a device that serves the purpose of moving an automobile. It serves as the legs of a vehicle. A tire is always filled with air and the air pressure must always be within the manufacturer recommend psi.
The sign that shows that the air pressure is outside the manufacturer recommend psi is a cup with an exclamation mark.
Learn more about air pressure of tires:https://brainly.com/question/10466035?
#SPJ2
The material that is used to make the helmets and hand shields must be an:
The material that is used to make the helmets and hand shields must be an insulator. The correct option is b.
What is an insulator?An insulator is any substance that prevents energy—such as electricity, heat, or cold—from moving through it easily. Good insulators include glass, plastic, rubber, and wood.
Insulators are substances that prevent electricity from passing through them. Insulators are employed as a defence against the potentially harmful effects of electricity because they oppose electric current. Glass, air, wood, plastic, and rubber are a few examples of insulators.
A material that is an insulator for heat and electricity must be used to make helmets and hand shields. Helmets, shields, and eye protection must not easily catch fire and be sterile-resistant.
Thus, the correct option is b.
For more details regarding insulator, visit:
https://brainly.com/question/24909989
#SPJ2
Your question seems incomplete, the missing options are:
- Conductor
- Insulator
- Both a and b
PLEASE FIX THIS LUA SCRIPT
Answer:
When declaring variables, you said “workspace.MeanEnemy”. What you should have done was “game.Workspace.MeanEnemy”. Same for the variable right under it. Other than that, seems to be all good!
Hope This Helped!
why is it important to push a dolly instead of pulling it?
The reason why it is important to push a dolly instead of pulling it is because;
pushing of the dolly means that the force you apply to the heavy object would be acting in an opposite direction to the force of gravity whereas pulling it will mean the heavy object will be acting in the direction of gravity and as such the object can fall on you.
Dollies are equipment's that are used to move heavy objects around.
Now, when making use of a dolly by pushing, you have to make the dolly lean in such a way that the only part that is in contact with the ground is the tires in order for the dolly to move.
However, when you pull a dolly, you are pulling it in the direction that gravity is acting and so balancing a heavy object and then pulling it towards yourself in the direction it wants to fall will just be improper as it will fall on you in no time.
In conclusion, pushing of the dolly means that the force you apply to the heavy object would be acting in an opposite direction to the force of gravity and as such the heavy object can't fall on you like that.
Read more about force opposite gravity at; https://brainly.com/question/10941832
