Table C: Known Specific Heat Values for Common Materials
Material
Specific Heat
(J/g C)
4.18
Water
Concrete
Wood
Aluminum
Glass
Sand
Steel
Iron
Copper
Lead
Gold
0.88
1.80
0.90
0.84
0.83
0.49
0.44
0.38
0.16
0.13
% Error
(deviation from known)

If the researcher obtains a z-score that is greater than 1.645, she can reject the null hypothesis at the 0.05 level of significance and conclude that the alternative hypothesis is supported.

To determine the critical value of z for a one-tailed hypothesis test at the 0.05 significance level (or alpha level), we need to use a z-table or statistical software.

For a one-tailed test with a 0.05 significance level, look for the z-score that corresponds to the 95th percentile of the standard normal distribution. Find the z-score that separates the bottom 95% of the distribution from the top 5%.

Using a z-table, find that z-score for 95th percentile is approximately 1.645.

To know more about the null hypothesis, here

brainly.com/question/28920252

#SPJ4

Answer:

The energy released as the mercury vapor cools from 356°C to 25°C can not be determined from the information provided. The amount of energy released depends on various factors such as the heat capacity of the substance, the mass of the substance, and the specific conditions in which it is cooling.

Explanation:

Answer:

807 cal

Explanation:

To determine the energy released as the mercury vapor cools from 356°C to 25°C, we need to determine the change in its internal energy. The internal energy of a substance is given by the equation ΔU = q + w, where ΔU is the change in internal energy, q is the heat absorbed or released by the substance, and w is the work done by the substance.

In this case, the heat absorbed by the mercury as it is heated from 25°C to 356°C is 110 cal, and the heat absorbed to vaporize the mercury is 697 cal, so the total heat absorbed is 110 + 697 = 807 cal. As the mercury vapor cools from 356°C to 25°C, it releases heat, so the heat released can be calculated as q = -807 cal.

Since no work is done in this process (the substance is not expanding or contracting against an external pressure), the work term can be ignored. Therefore, the change in internal energy of the mercury vapor as it cools from 356°C to 25°C is ΔU = q = -807 cal.

So, the mercury releases 807 cal of energy as it cools from 356°C to 25°C.


Tell me if you still confuse

ALLEN

Belief that the color red is a hopeful color or that it is associated with death are examples of cultural contexts. That is option B.

Cultural contexts can be defined as the belief, ideas and norms that are shared by a group of people which is usually passed from generation to generation.

There are usually four aspects of cultural context are setting, lifestyle, purpose, and falling action.

The belief that colour red is associated with death is related to culture because red is associated with the colour of blood.

Learn more about culture here:

https://brainly.com/question/25010777

#SPJ1

1) The relationship between the temperature and the pressure of the gas is directly proportional

2) The volume and the pressure graph are inversely related

3) The particles and pressure graph are directly related.

The temperature-pressure graph for gases is a graphical representation of the relationship between the temperature and pressure of a gas. This relationship is described by the ideal gas law, which states that the pressure of a gas is proportional to its temperature and the number of gas particles (provided the volume of the container is constant).

The temperature-pressure graph for gases can be plotted using data from experiments or simulations. In general, the graph will show that as the temperature of a gas increases, its pressure also increases. Conversely, as the temperature decreases, the pressure will also decrease.

Learn more about temperature:https://brainly.com/question/15267055

#SPJ1

Answer:

C4H8O4

Explanation:

The empirical formula of a compound can be determined from its elemental composition. To determine the empirical formula, we first need to convert the mass of each element to moles, and then divide by the smallest number of moles of any element to obtain the mole ratio.

From the combustion analysis, the number of moles of CO₂ produced is 11.88 g / 44.01 g/mol = 0.2694 mol. The number of moles of H₂O produced is 3.891 g / 18.015 g/mol = 0.2169 mol.

Next, we convert the carbon and hydrogen present in the compound to moles by dividing the mass of each element by its atomic mass:

C = (7.132 g - 11.88 g - 3.891 g) / 12.01 g/mol = 0.2694 mol

H = 2 * 0.2169 mol = 0.4338 mol

Now, we divide each number of moles by the smallest number of moles (0.2694 mol) to obtain the mole ratio:

C = 0.2694 mol / 0.2694 mol = 1

H = 0.4338 mol / 0.2694 mol = 1.6

O = 0.2694 mol / 0.2694 mol = 1

The empirical formula of the compound is therefore C1H1.6O1, which can be simplified to C1H2O.

To determine the molecular formula, we use the molar mass of the compound, 132.1 g/mol, and compare it to the molar mass calculated from the empirical formula. The molar mass of C1H2O is 12.01 g/mol + 2 * 1.01 g/mol + 16.00 g/mol = 30.03 g/mol. To find the molecular formula, we divide the molar mass of the compound by the molar mass of the empirical formula and multiply each element in the empirical formula by this number:

132.1 g/mol / 30.03 g/mol = 4.40

C = 1 * 4.40 = 4.40

H = 2 * 4.40 = 8.80

O = 1 * 4.40 = 4.40

The molecular formula of the compound is therefore C4H8O4.

Aɳʂɯҽɾҽԃ Ⴆყ ɠσԃKEY ꦿ

Answer:

11 * CH₂ = C₁₁H₂₂

Explanation:

The empirical formula of a compound can be determined by finding the ratio of the number of atoms of each element present in the compound. To find the empirical formula of this organic compound, we need to calculate the number of moles of each element present in the sample.

First, we find the number of moles of carbon by dividing the mass of CO₂ produced by the molar mass of CO₂:

11.88 g CO₂ / 44.01 g/mol CO₂ = 0.269 mol C

Next, we find the number of moles of hydrogen by dividing the mass of H₂O produced by the molar mass of H₂O:

3.891 g H₂O / 18.02 g/mol H₂O = 0.216 mol H

To find the empirical formula, we divide the number of moles of each element by the smallest number of moles calculated:

0.269 mol C / 0.216 mol H = 1.244

0.216 mol H / 0.216 mol H = 1

So the empirical formula of the organic compound is CH₂.

The molecular formula of a compound is a multiple of its empirical formula, with the multiple determined by the molar mass. To find the molecular formula of this organic compound, we divide the molar mass of the sample by the molar mass of the empirical formula:

132.1 g/mol / (12.01 g/mol + 2 * 1.01 g/mol) = 11

So the molecular formula of the organic compound is 11 * CH₂ = C₁₁H₂₂.



ALLEN

Answer:

The relationship between concentration and density is straightforward: the more solute that is dissolved in a solvent, the greater the density of the solution. In the case of a 50% solution of ethylene glycol in water, the density of the solution would be higher than that of pure water due to the presence of the ethylene glycol, which is denser than water. By measuring the density of the solution, it is possible to determine the concentration of ethylene glycol in the solution.

At 20 °C, the density of pure ethylene glycol is 1.135 g/mL while the density of water is 1.000 g/mL. So a solution that is 50% ethylene glycol would have a density that is intermediate between these two values, and its density could be used to determine the concentration of ethylene glycol in the solution. The greater the concentration of ethylene glycol, the greater the density of the solution, and vice versa. By measuring the density of the solution, it is possible to determine the concentration of ethylene glycol, and hence its suitability as antifreeze in an automobile radiator.

Explanation:

Answer:

Density is defined as the mass of a substance per unit volume, so we can use the given mass and volume to calculate the density of osmium.

Density = mass / volume

Substituting the given values, we get:

Density = 2.72 g / 0.121 m^3

Simplifying, we get:

Density = 22.48 g/m^3

Therefore, the density of osmium is 22.48 g/m^3.

Explanation:

Answer:

22,426 g/m³.

Explanation:

Density is defined as mass per unit volume. To calculate the density of osmium, we need to divide its mass by its volume:

Density = Mass / Volume = 2.72 g / (0.121 cm³ * (1 m³ / 10^6 cm³))

= 2.72 g / 0.121 * 10^-6 m³ = 2.72 * 10^6 g / 0.121 m³ = 22,426 g/m³

So, the density of osmium is approximately 22,426 g/m³.

Explanation:

Answer:

11B

Explanation:

When 10B absorbs a neutron, it becomes the unstable isotope 11B, which quickly undergoes beta decay to form the stable isotope 11C. In this process, a neutron in the 10B nucleus is transformed into a proton, which increases the atomic number of the isotope from 5 to 6. The beta decay of 11B involves the emission of an electron (beta particle), which is produced when a neutron in the nucleus decays into a proton and an electron.

If you use 0.600 mol of gas, the gas will have a new volume of 13.2 L.

The amount of space a three-dimensional item takes up is measured by its volume. Usually, it is expressed in terms of liters (L), cubic meters (m3), or cubic feet (ft3).

The volume of the gas is directly proportional to the amount of gas (measured in moles) present, presuming constant temperature and pressure. Avogadro's Law describes this connection.

This law allows us to establish a proportion:

Amount1 / Volume1 = Volume2 / Amount2

If Volume2 is the new volume we wish to find, Volume1 is the initial volume, Amount1 is the initial amount of gas (in moles), and Volume2 is the new volume (in moles).

By entering the specified values, we obtain:

Volume2 / 0.600 mol = 1.1 L / 0.05 mol

For Volume 2, we solve as follows:

Volume2 = 1.1 liters / 0.05 mol / 0.600 mol = 13.2 liters

Therefore, if you use 0.600 mol of gas, the new volume of the gas will be 13.2 L.

To know more about volume, visit:

https://brainly.com/question/28058531

#SPJ1

Answer:

27 moles of sulfuric acid are produced.

Explanation:

The equation for the reaction between nitric acid (HNO3) and sulfuric acid (H2SO4) to form nitration sulfate (HNO3) and water (H2O) is:

2 HNO3 + H2SO4 → H2SO4 + 2 H2O

For every 2 moles of nitric acid that react, 1 mole of sulfuric acid is produced. So, when 54 moles of nitric acid are consumed, 54/2 = 27 moles of sulfuric acid are produced.

Answer:

b. 500 m/s

Explanation:

Answer The reaction shown below is a chemical reaction between aqueous calcium hydroxide (Ca(OH)2) and aqueous hydrochloric acid (HCl):

Explanation:

Ca(OH)2(aq) + HCl(aq) -> CaCl2 + H2O

This reaction is an example of a neutralization reaction. Neutralization reactions occur when an acid reacts with a base to produce a salt and water. In this reaction, the hydrogen ions from the hydrochloric acid react with the hydroxide ions from the calcium hydroxide to produce calcium chloride (CaCl2) and water (H2O). The reaction results in the neutralization of both the acid and the base, hence the name "neutralization reaction."

Sophie is pushing her bike up a hill with 10N if she increases her force to 12N, then there will be decrease the bike's mass. Therefore, the correct option is option C.

A force is indeed an effect in physics that may modify the velocity of an item. A force can cause a mass object to change its velocity (e.g., moving from rest), i.e., to accelerate.

Intuitively, force may be characterized as a push or even a pull. A force is a vector quantity since it has both direction and magnitude. It really is measured in newtons, the SI unit of mass (N). Sophie is pushing her bike up a hill with 10N if she increases her force to 12N, then there will be decrease the bike's mass.

Therefore, the correct option is option C.

To know more about force, here:

https://brainly.com/question/13014979

#SPJ1

The part that js designated as the surrounding here is  Inside the famous hood

In this scenario, the system is the chemical reaction being performed by the chemist with the various glass containers and liquids. The surroundings are everything else outside of this system, including the fume hood and the outside of the building.

The correct answer that is the designated surrounding here would be the fume hood.

Read more on chemical reactions here:https://brainly.com/question/11231920

#SPJ1

A chemist is performing a chemical reaction under a fume hood. The chemist has a set of beakers, flasks, and tubes set up under the fume hood, with various liquids being combined inside the glass containers. The fume hood is turned on in order to withdraw any toxic gases and expel them outside the building.

Which part of this system is designated as the surroundings

A. Outside of the building

B. Liquid contents of the glass containers

C. Inside the famous hood

D. The glass containers

This statement is referring to a laboratory experiment in molecular biology or genetics where DNA has been labeled with the fluorescent dye Cy5, which emits a red signal when excited by light. The experiment has revealed that the labeled DNA (in this case, the test DNA) is present along the short arm of chromosome 3. This information can be used to study the location of specific genes or other genetic elements on the chromosome. The use of the reference DNA allows for the comparison of the test DNA to a known and well-characterized reference, which can provide additional information about the identity and location of the test DNA.

Answer:

This labeling information suggests that the test DNA, which was labeled with the dye Cy5 (red), is present along the short arm of chromosome 3 in the reference DNA sample. The bright red signal indicates a high concentration of the labeled test DNA in that region, which could indicate that the test DNA is interacting with or mapping to that specific location on chromosome 3. This information can be used in various genomic studies, such as genome mapping, gene expression analysis, and chromatin analysis, to better understand the distribution and function of specific DNA sequences in the genome.

Explanation:

Just tell me if you kinda confuse


ALLEN

The relationship between temperature and gas motion is a direct relationship.

The kinetic energy of gas particles is proportional to the square of their velocity, so as the temperature of a gas increases, the velocity of its particles also increases. This means that the motion of the gases becomes more energetic, causing the particles to collide more frequently and with greater force. These collisions result in an increase in pressure and volume, which are two other characteristics that are related to the temperature and motion of gases.

In summary, the relationship between temperature and the motion of gases can be explained by the kinetic theory of gases, which states that the temperature of a gas is directly proportional to the average kinetic energy of its particles. As the temperature of a gas increases, its particles move faster, resulting in more energetic collisions and changes in pressure and volume.

Learn more about temperature:https://brainly.com/question/11464844

#SPJ1

It is a greenhouse gas. The greenhouse effect is caused by the absorption by the surface of the Earth and re-absorption by the atmosphere of the greenhouse gases (CH₄, CO₂, NO, CFCs ) in the environment.

What is the greenhouse effect?

The greenhouse effect is a natural process by which certain gases in the Earth's atmosphere, known as greenhouse gases, trap heat from the sun and prevent it from escaping into space. The greenhouse gases, which include carbon dioxide, methane, water vapor, and others, act like a blanket around the Earth, absorbing and re-emitting infrared radiation that would otherwise be lost to space. This process helps to keep the Earth's temperature within a range that is suitable for supporting life. However, human activities such as burning fossil fuels have increased the concentration of greenhouse gases in the atmosphere, leading to an enhanced greenhouse effect and causing the Earth's temperature to rise, a phenomenon known as global warming.

To know more about greenhouse effect, visit:

https://brainly.com/question/13706708

#SPJ1

The complete question and the labelled answer respectively, is as follows:

The group that would most benefit from the claim is people who sell coffee with caffeine.

Caffeine increases mental alertness, making it ideal for activities related to the workplace because it makes a person more attentive, aware of their surroundings, and better able to keep up with tasks.

Caffeine  enhances motor coordination, which is the capacity to coordinate various body parts to produce complicated movements. Among those who are active, the capacity to enhance motor coordination may increase need for caffeine.

The organizations who would gain most from the claim are the dealers in caffeinated items, including; based on the link of caffeine with benefits that are desired by active people (working people who earn income).

Therefore, option A is correct.

Learn more about claim at:

https://brainly.com/question/2748145

#SPJ1

The energy traveled from you to your friend through the medium of the air. When you moved your arm, the energy created a vibration in the air which then propagated in all directions. As the wave traveled, it passed through the air and eventually reached your friend, carrying energy with it.

Energy is the ability to do work or cause change. It is the capacity to cause motion, to create heat, to transform matter, or to generate electricity. It can come from a variety of sources, such as the sun, wind, water, fossil fuels, nuclear energy, and other renewable sources. Energy can also be stored in batteries or fuel cells. It is a fundamental component of the universe and is essential for life. All life forms require energy to survive and grow, and energy is also necessary for the development of technology. Without energy, the world would not function as it does today.

To learn more about energy
https://brainly.com/question/19666326
#SPJ1

The stoichiometry can be used to obtain the parameters about a reaction.

The question is incomplete but I will show you how to use stoichiometry to obtain the parameters that concern a reaction.

Here are the steps to use stoichiometry in a chemical reaction:

Write a balanced chemical equation: The first step is to write a balanced equation for the chemical reaction, which shows the correct number of atoms of each element involved in the reaction.

Determine the molar ratio: From the balanced equation, determine the molar ratio of the reactants and products by counting the number of moles of each species. This will give you the conversion factor between the reactants and products.

Choose a reactant or product to work with: Choose the reactant or product that you have information about, either the amount or the concentration.

Calculate the number of moles: Using the amount or concentration of the reactant or product, calculate the number of moles of that species.

Use the molar ratio to calculate the other species: Using the molar ratio determined in step 2, calculate the number of moles of the other reactants or products.

Convert moles to the desired units: Finally, convert the number of moles to the desired units, such as mass, volume, or number of particles.

Learn more about stoichiometry:https://brainly.com/question/30215297

#SPJ1

B. The single O-H bond in water is very polar, but glycerol has three O-H bonds, which form a network of attractive forces.

Glycerol is a colorless, odorless, sweet-tasting, viscous liquid that is widely used in pharmaceutical formulations. It is a sugar alcohol, which is a type of carbohydrate that is not fully metabolized by the body. Glycerol is a by-product of the hydrolysis of fats and oils. It is used in various industries, such as cosmetics, food, medical and pharmaceuticals, and it is also used as an anti-freeze and a solvent. It is used in skin care products and as an emollient, and it helps to retain moisture in the skin.

This network of attractive forces causes the particles to stick together more, making it harder for them to move, and thus increasing the viscosity.

To learn more about glycerol
https://brainly.com/question/23503113
#SPJ1

Answer:

[tex]\huge\boxed{\sf n = 1.5\ mol}[/tex]

Explanation:

Mass = m = 39 g

Molar mass = M = 7 + 19 = 26 g/mol

No. of moles = n = ?

[tex]\displaystyle n = \frac{m}{M}[/tex]

Put the given data in the above formula.

n = 39/26

[tex]\rule[225]{225}{2}[/tex]

Answer:

no answer

Explanation:

I wish I could help you, but go to your text book for reference

Triglycerides, also known as triacylglycerols, are composed of a glycerol backbone attached to three fatty acid chains.

The fatty acids are esterified to the three hydroxyl groups of the glycerol backbone, forming a molecule with three fatty acid chains bound to a glycerol molecule. Triglycerides are the main constituents of natural fats and oils and are the most common form of stored energy in animals.

Triglycerides are the main type of fat (lipid) found in the body and in food. They are composed of three fatty acids attached to a glycerol backbone. Triglycerides are an important source of energy for the body and are stored in adipose tissue (body fat) for later use. They can also be found in the bloodstream, where they can contribute to the formation of plaque in the arteries, increasing the risk of heart disease. Triglycerides are commonly found in foods that are high in fat, such as oils, butter, and meats, as well as in some plant-based foods, such as nuts and seeds.

To learn more about Triglycerides :

https://brainly.com/question/13840067

#SPJ4

Answer:

C1H1

Explanation:

The empirical formula of a hydrocarbon can be determined by analyzing the products of its combustion reaction. To do this, we first need to convert the masses of CO2 and H2O produced to moles. The number of moles of CO2 is 6.47 g / 44.01 g/mol = 0.1469 mol. The number of moles of H2O is 2.98 g / 18.02 g/mol = 0.1654 mol.

Next, we can use the number of moles of CO2 and H2O to determine the number of moles of carbon (C) and hydrogen (H) present in the original hydrocarbon. The balanced equation for the combustion of a hydrocarbon is:

CxHy + (x + y/4)O2 -> xCO2 + (y/2)H2O

Since one mole of CO2 is produced from one mole of carbon in the hydrocarbon, the number of moles of carbon is equal to the number of moles of CO2: 0.1469 mol.

Since two moles of H2O are produced from one mole of hydrogen in the hydrocarbon, the number of moles of hydrogen is equal to half the number of moles of H2O: 0.1654 mol / 2 = 0.0827 mol.

Finally, we can divide each number of moles by the smallest number of moles to obtain the mole ratio. In this case, both carbon and hydrogen have the same number of moles, so the mole ratio is 1:1.

C = 0.1469 mol / 0.1469 mol = 1

H = 0.0827 mol / 0.1469 mol = 0.56

The empirical formula for the hydrocarbon is C1H0.56, which can be simplified to C1H1 by rounding the subscript to the nearest whole number. The empirical formula for the hydrocarbon is therefore C1H1.

Aɳʂɯҽɾҽԃ Ⴆყ ɠσԃKEY ꦿ

The distance between the two hydrogen atoms in a molecule of water is 0.00000000172 m, 1.72x10⁻⁹ m is the distance in scientific notation.

Scientific notation is defined as a way of writing very large or very small numbers. A number is written in a very scientific notation when a number between 1 and 10 is multiplied by a power of 10. Let's consider for example, 650,000,000 can be written in scientific notation as 6.5 × 10⁸.

Distance is basically defined as the distance, or separation, between two objects. An example distance is 5 feet between two tables. Distance is a scalar quantity.

Learn more about scientific notation from the link given below.

https://brainly.com/question/29300034

#SPJ4

1.4108g of copper will be produced.

Define a displacement reaction.

When a less reactive element is pushed out of a compound that also contains a more reactive ingredient, the result is a displacement reaction. The less reactive element is now pure and left alone following a displacement reaction.

When an atom or group of atoms in a molecule are replaced by another atom, this is referred to as a displacement reaction. A + B + C = A + B + C. When A is more reactive than B, the aforementioned equation holds true.

2Al + 3CuCl2 → 3Cu + 2AlCl3.

Number of moles of Al  = 0.4g/27g

                                       = 0.0148moles

2 moles of Al will give 3 moles of Cu.

So, 0,0148moles Al will give 3/2 *0.0148 moles of copper i.e. 0.022moles

Mass of Cu will be 0.022*63.55 i.e. 1.4108g

To learn more about displacement reaction use link below:

https://brainly.com/question/26413416

#SPJ1

Answer:

46.726 amu

Explanation:

The total abundance of the two isotopes of antimony is 100%, so the abundance of the other isotope is 100% - 61.30% = 38.70%.

Since the atomic weight of antimony is 121.957 amu, the total mass of the two isotopes is 121.957 amu. The mass of the second isotope can be calculated as follows:

mass of the second isotope = (total mass of the two isotopes) * (abundance of the second isotope) / 100

mass of the second isotope = 121.957 amu * 38.70% / 100

mass of the second isotope = 46.726 amu

So the mass of the other isotope is 46.726 amu.

The heat of fusion for water is 6.01 kJ/mole and the heat of vaporization for water is 40.7 kJ/ mol,7.5125 KJ energy is needed to melt 22.5 grams of ice.

The enthalpy of fusion is also known as heat of fusion, is the change in its enthalpy resulting from supplying energy, typically heat, to a specific quantity of the substance to alter its state from a solid to a liquid, at constant pressure.

Given:

The heat of fusion for water = 6.01 kJ/mole

The heat of vaporization for water = 40.7 kJ/ mol

Energy = ?

Number of moles of ice = mass / molar mass

Number of moles of ice = 22.5 / 18

= 1.25 moles

Q = number of moles × Hf

= 1.25 × 6.01

= 7.5125 KJ

Thus, 7.5125 KJ energy is needed to melt 22.5 grams of ice.

To learn more about the heat of fusion, follow the link;

https://brainly.com/question/14053504

#SPJ1

Answer:it is 5 square c

Explanation:

because c is the best