The partial electron configuration of an atom with 11 electrons is shown.
1s²2s²2p6x
Which of the following does X represent?
A. 3s¹
B. 2d¹
C. 3p¹
D. 4s¹
Answer:
This would be 3S^1.
Explanation:
It would be 3s^1 because that is how the orbitals are formed.
It would be form lowest to highest: s,p,d,f.
Then it would go to highest, 2 =s, 6=p, d =10, f= 14.
So, it would be: 1s2, 2s2, 2p6, 3s2.
Since 3s2 isn't on here, then 3s1 would become the answer.
The _____which are numbers that are found on the lower____hand side of each element symbol. This tells you the number of ____of this element in the molecule
Answer:
twenty charecter answer
explain how the line spectrum of hydrogen atom in Lyman series is formed
Line spectrum of hydrogen atom in Lyman series is formed 'absorbs energy and gets excited'
The electron in a hydrogen atom absorbs energy and gets excited and the electron jumps from a lower energy level to a higher energy level and when it comes back to its original state, it gives out energy which forms a hydrogen spectrum and the line in Lyman series is formed by electronic transition and all the wavelengths in the Lyman series are in the ultraviolet band and this are seen in ultraviolet emission lines of the hydrogen atom as an electron goes from n ≥ 2 to n = 1 where n is the principal quantum number and the lowest energy level of the electron.
Know more about Lyman series
https://brainly.com/question/6836691
#SPJ1
18. What is the mass of an object with a density of 2.44g/ml and a volume of
25ml?
a. 61g
b. 61.0g
c. 10.2g
d. 0.098g
The mass of the object with a density of 2.44g/ml and a volume of
25ml is 61g
Density is mass per unit volume.The mass is as follows;d=m/vm=dvm= 2.44 g/ml ×25 ml=61gThe measure of how densely a substance is packed together is called density. It is defined as the mass per unit volume.A measurement of density contrasts the mass of an object with its volume. The amount of matter in a certain volume of an object is referred to as high density. A substance's density describes how thick it is in a given space. Density is essentially a measurement of how tightly things are packed. It is a particular physical trait of that thing.To learn more about density visit:
https://brainly.com/question/15164682
#SPJ9
convert 1295 cm2 to m2
Answer:
0.1295 m^2
Explanation:
just divide 1295 by 10000
Review the terms and their definitions in the Mini Glossary. Write a sentence explaining how your body gets energy from food
Food energy is transformed into energy that the body's cells can utilise during cellular respiration. Energy is converted to ATP during cellular respiration, which transforms glucose and oxygen into carbon dioxide and water.
What kind of energy is used by your body to develop and maintain itself?
Your body can move its muscles when you ingest food, which enables you to breathe, walk, run, leap, lift objects, and perform all the other survival-related tasks. The mechanical energy of moving muscles is created from the chemical energy of food.
What kind of energy is used by your body to develop and maintain itself?Your body can move its muscles when you ingest food, which enables you to breathe, walk, run, leap, lift objects, and perform all the other survival-related tasks. The mechanical energy of moving muscles is created from the chemical energy of food.
To know more about cellular respiration visit:
https://brainly.com/question/13721588
#SPJ9
What is the name and function of this laboratory glassware
Answer: Protects your eyes from chemical splashes, Must be worn during all labs, from start to lab checkout, in which chemicals, glass or heating of substances is involved. No exceptions!!
A certain chemical reaction releases 27.4 kJ/g of heat for each gram of reactant consumed. How can you calculate what mass of reactant will produce 880. J of
heat?
Set the math up. But don't do any of it. Just leave your answer as amath expression.
A chemical reaction of exothermic kind releases energy in the form of heat and light.
We are given that reactant releases 27.4kJ/g for every gram of reactant consumed.
We are required to find number of grams of reactant that has been consumed
It is also given that 880J of energy is released
Hence, grams of reactants consumed is 880/27.4gm
Disclaimer:
It has been asked by the student to leave the question as mathematical expression.
For further reference:
https://brainly.com/question/15000187?referrer=searchResults
#SPJ9
Why is the classification species not considered a group? (1 point)
O Each species is a separate type of organism.
O Each species is an individual organism.
O Each species lacks the characteristics of the levels above.
O Each species shares characteristics with other species.
Each species is a separate type of organism.
A species is a group of creatures that share similar traits. The same species of organisms are capable of sexual reproduction as well as interbreeding and producing fertile offspring. It is a fundamental unit of taxonomy and classification.The system is divided into seven categories: Kingdom, Phylum or Division, Class, Order, Family, Genus, and Species. Kingdom is the most inclusive category.In a group, many types of an organism can be included even if they do not share the same traits. But species is a group of organisms that share similar traits.For example, human beings are species as they are all alike in physical features, way of reproduction, etc. But the animal is considered a group because it included a variety of living beings.Therefore, Each species is not considered a group.
Learn more about taxonomy here:
https://brainly.com/question/1304906
#SPJ9
HELPPP
Ferric chloride combines with water in a reversible reaction to produce ferric hydroxide and hydrochloric acid as shown.
FeCl3 + 3H₂0 Fe(OH)3 + 3HCI
Which reaction must occur at the same time as the formation of ferric hydroxide?
(1 point)
O Fe(OH)3 + 3HCI → FeCl3 + 3H₂O
O FeCl3 + 3HCI → Fe(OH)3 +3H₂O
O FeCl3 Fe + 3Cl
O 2H₂O → H₂ + O₂
Ferric chloride combines with water in a reversible reaction to produce ferric hydroxide and hydrochloric acid as shown.
[tex]FeCl_{3}[/tex] + 3H₂O → [tex]Fe(OH)_{3}[/tex] + 3HCI
The reaction which must occur at the same time as the formation of ferric hydroxide are given below .
[tex]FeCl_{3}[/tex] → Fe · + Cl ·
So , option C is correct one .
The water ionizes to hydrogen and hydroxide ions and the ferric chloride in the water ionizes to iron, or ferric and chloride ions. As a result, the solution becomes more hydrogen ion-rich than it was before the precipitation, which causes the solution to become acidic.
to learn more about ferric hydroxide please click here ,
https://brainly.com/question/24389121
#SPJ1
Answer:
The real answer is Fe(OH)3 + 3HCI - FeCl3 +3H2O
Explanation:
I took the test and this was the correct answer.
What is the meaning of electronegativity
Answer:
Electronegativity is the ability of an atom to attract the shared pair of electrons towards itself *in a molecule*
PLS HELP!! Animation shows a complete revolution of the Earth around the sun. What happens during this time?
A. Earth experiences a complete day.
B. The moon makes one complete phase change.
C. Four seasons occur on Earth.
D. Day turns to night. Btw this is Science not chemistry!
Answer:
C
Explanation:
it would be a lot more easier if you could show the animation
But nevertheless your answer would be
C Four seasons occur on Earth.
Answer: The answer is letter C.
Explanation:
There are four seasons on our planet Earth . These four seasons are, Spring, Summer, Autumn, And Winter (my personal favorite.)
These four seasons only occur, based on which side of the sun our continent is on. Yes we could literally be facing the sun, but the sun isn’t really directing heat now. (Don’t fact check that.) but anyways, hopefully this helps. And remember, the earth take 365 days to orbit the sun. Which is 12 months, and each season has 3 months each to roam the earth.
how many moles of nickel are in atoms are there in 9.00 X 10^9 Ni atoms
Answer:
1.49 x 10⁻¹⁴ moles Ni
Explanation:
To find the amount of moles in the sample, you need to multiply the amount of atoms by Avogadro's Number. This conversion is a ratio that describes how many atoms there are per every 1 mole. It is important to arrange the ratio in a way that allows for the cancellation of units (atoms should be in the denominator). The final answer should have 3 sig figs like the given value.
Avogadro's Number:
6.022 x 10²³ atoms = 1 mole
9.00 x 10⁹ atoms Ni 1 mole
--------------------------------- x -------------------------------- = 1.49 x 10⁻¹⁴ moles Ni
6.022 x 10²³ atoms
A typical aspirin tablet contains 321 mg of the active ingredient acetylsalicylic acid. convert to grams
A typical aspirin tablet contains 321 mg of the active ingredient acetylsalicylic acid and 321 mg makes 0.321 g.
Define Aspirin.The nonsteroidal anti-inflammatory medicine (NSAID) aspirin, often referred to as acetylsalicylic acid (ASA), is used to treat a variety of inflammatory disorders by lowering pain, fever, and/or inflammation. These conditions include Kawasaki disease, pericarditis, and rheumatic fever.
Long-term usage of aspirin is also used to help those at high risk avoid further heart attacks, ischemic strokes, and blood clots. Effects of pain or fever often start within 30 minutes. Aspirin functions similarly to other NSAIDs but also inhibits platelet function.
What risks does aspirin pose?Your doctor should be consulted when deciding whether or not to take aspirin because it depends on your cardiovascular risk, according to Wong. While aspirin is often taken safely by many people, it can also result in life-threatening stomach, intestinal, and brain bleeding.
convert mg to gram1 mg = 1/1000 g
so,
321 mg = 321/ 1000g
= 0.321g
Learn more about Aspirin here:-
https://brainly.com/question/14320356
#SPJ9
Name 3 Rectangular Items that are something you can hold. And then name those items' Length, Width, Height, Area, or Volume.
Name 2 Triangular Items that are something you can hold. And then name those items' Length, Width, Height, Area, or Volume.
Name 3-Dimensional Rectangular Items that are something you can hold. And then name those items' Length, Width, Height, Area, or Volume.
Answer:To find the volume of a rectangular prism, we multiply the length of the prism by the width of the prism by the height of the prism.
honeslty
Explanation:
Determine the number of protons, neutrons, and electrons present in each of the atoms.
53 Cr
protons:
neutrons:
electrons:
Answer:
protons: 24
neutrons: 29
electrons: 24
Explanation:
A chemist records the amount of liquid dispensed by a machine and obtains the following values: 283.2 mL, 284.1 mL, 283.9 mL, 284.0 mL, 284.1 mL. The machine is supposed to dispense 296 mL of liquid. Which of the following describes the accuracy and precision of the machine?
precise but not accurate
accurate but not precise
neither accurate nor precise
accurate and precise
The machine is accurate and precise
Hence , option D is correct one .
Accuracy is the capacity of an instrument to measure the precise value. In other words, it refers to how closely the measured value resembles a reference or genuine value. Small readings can be taken to increase accuracy. The calculation's inaccuracy is decreased by the little reading.
The precision of a substance is defined as the degree to which two or more measurements agree with one another. It is incredibly precise but not always accurate to measure something if you weigh it five times and get 3.2 kg each time. Accuracy is not necessary for precision.
learn about precise ,
https://brainly.com/question/15926220
#SPJ1
Calculate the ratio of the mass ratio of S to O in SO to the mass ratio of S to O in SO2 . Consider a sample of SO in which the mass of S = 32 g and the mass of O = 16 g . Assume that in SO2 that there is also 32 g of S .
The correct answer is The mass ratio of S to O in SO divided by the mass ratio of S to O in SO2 is 2 :1.
When two elements can combine to form two or more different compounds, the mass of one element compared to the fixed mass of the other will always be in a ratio of small whole numbers.
As we all know,
Oxygen mass = 16 g
Sulfur mass = 32 g
Sulfur mass in SO = 32 g
The mass of oxygen in SO is 16 g.
Sulfur to oxygen mass ratio in SO =..... (1)
Sulfur mass in SO2 = 32 g
Oxygen mass in SO2 = (2 16)g = 32 g
Sulfur to oxygen mass ratio in SO2 =..... (1)
The S/O ratio in SO is 2: 1.
The S/O ratio in SO2 is 1: 1.
Taking the ratios 1 and 2, we get:
the mass ratio of S to O in SO to mass ratio of S to O in SO2 is 2 : 1
Learn more about mass ratio here :-
https://brainly.com/question/14577772
#SPJ9
This is an impossible formula. Pretend it is real.
If you had 1 mol of Mn4(ClO4)3 how many moles of Cl would there be?
Remember that you should never include a 1 as a subscript but for the sake of clarity for this problem you may see a 1 as a subscript.
Make sure your answer includes TWO decimal places.
The number of mole of Cl in 1 mole of Mn₄(ClO₄)₃ is 3.00 moles
Description of Mn₄(ClO₄)₃From the formula of the compound, Mn₄(ClO₄)₃ the following were obtained:
4 moles of Mn3 moles of Cl12 moles of OHow to determine the number of mole of Cl in 1 mole of Mn₄(ClO₄)₃From the formula, we can see that 3 moles of Cl are present.
Thus, 1 mole of Mn₄(ClO₄)₃ will contain = 1 × 3 = 3.00 moles of Cl
Therefore, we can conclude that 1 mole of Mn₄(ClO₄)₃ contains 3.00 moles of Cl
Learn more about moles of element in a compound:
https://brainly.com/question/28037816
#SPJ1
DHMO can be lethal (deadly) to humans in small doses.
O True
O False
Yes, DHMO (Dihydrogen monoxide) can be lethal (deadly) to humans in small doses. It's true.
Briefing :Dihydrogen monoxide is a known cause of thousands of deaths each year and contributes significantly to the millions of dollars in environmental and property damage. Dihydrogen monoxide is known to pose several risks, including:
Death from accidental DHMO inhalation, even in small amounts.Solid DHMO exposure over an extended period of time harms tissues severely.A number of unpleasant, but typically not life-threatening, side effects result from excessive ingestion.Acid rain primarily consists of DHMO.Severe burns can result from DHMO gas.Causes soil erosion to occur.To know more about soil erosion :
https://brainly.com/question/28469981
#SPJ9
A solid object has a mass of 1.62 lb and a volume of 190 mL.
Express your answer using two significant figures.
The density of a solid object that has a mass of 1.62 lb and a volume of 190 mL is 3.87g/mL.
How to calculate density?Density is the measure of the mass of matter contained by a unit volume. It can be calculated by dividing the mass of the substance by its volume.
According to this question, a solid object is said to have a mass of 1.62 lb and a volume of 190 mL.
1 pound = 453.592 grams
1.62 Ibs is equivalent to 734.82 grams
Density of the solid object = 734.82 grams ÷ 190 mL
Density = 3.87g/mL
Therefore, the density of a solid object that has a mass of 1.62 lb and a volume of 190 mL is 3.87g/mL.
Learn more density at: https://brainly.com/question/20337365
#SPJ1
PLS HELP ME WITH MY CHEMISTRY
Answer:
[tex] \boxed{8.9 \: g /cm^3}[/tex]
Explanation:
Given:
Mass of sample= 39.2 g
Volume occupied= 4.4 cm³
To find:
Density=?
Solution:
Formula to be used,
[tex]\sf Density = \frac{mass}{volume} [/tex]
[tex]\sf Density = \cancel{ \frac{39.2}{4.4} } = 8.9 \bar{0} \bar{9} \: g /cm^3[/tex]
The rounder figure answer upto tenths place can be written as 8.9 g/cm³
[tex]\sf \small \pink{Thanks }\: \green{for} \: \blue{joining} \: \orange{brainly } \: \red{community}![/tex]
Is there anything wrong in this definition, if so, write the correct form: Intensive properties do not depend on the amount of matter present. Such properties include the melting point, boiling point, density, and ability to conduct electricity and to transfer energy as heat. Intensive properties are the same for a given substance regardless of how much of the substance is present.
Help will give brainly!!
Answer:
The definition and all examples are correctly mentioned only one mistake is spotted which is transfer of energy as heat included in Intensive Property which is wrong.
Explanation:
Intensive Property: Intensive properties are those properties which are Independent of the amount substance present.
For e.g. The melting point of ice on standard temperature & pressure is constant i.e. 0°C.
1 gram of ice will melt at 0°C so will be 1 kilogram ice. Hence melting point & similarly boiling point also is an Intensive Property.
before talking about Density let's understand Extensive properties.
Extensive Property: Extensive properties are those properties which are Dependent of the amount substance present.
for e.g. Volume, Weight, Mass, Length, Energy, Enthalpy, Entropy etc.
When One extensive divided by another extensive Property then perticular that property of substance is also intensive property.
Now we know that,
[tex] \sf Density = \frac{Mass}{volume} [/tex]
Where mass & volume both are extensive properties, hence density is an intensive property.
Ability to conduct electricity is called as Thermal Conductivity which is an intensive property.
The thermal conductivity of a perticular material does not change it varies material to material.
Transfer of energy as heat, let's have quick look at heat & temperature relation given by,
[tex]C = \frac{Q}{\Delta T} [/tex]
Where C is specific heat capacity which is an intensive property & specific heat is the ratio of added heat to the change in temperature & Heat is an Extensive property.
[tex]\sf \small \pink{Thanks }\: \green{for} \: \blue{joining} \: \orange{brainly } \: \red{community}![/tex]
Haaaaaaaalllllllpppppp
Name 2 Triangular Items that are something you can hold. And then name those items' Length, Width, Height, Area, or Volume.
Answer:
ice creem cone candy
Explanation
Name the material sent into slave by a supernova
If the oxide contains 22.24 % O by mass, what is the identity of the metal?
Express your answer as a chemical symbol.
The oxide contains 22.24% O by mass, so the identity of the metal as a chemical symbol is lead (Pb).
What is metal?A substance with high electrical conductivity, luster, and malleability, which readily loses electrons to form positive ions (cations) are called metals.
Mass percentage of oxygen in the oxide, i.e.,
ω(O) divided by 100 ω(O)
=22.24% ÷ 100%.
Mass percentage of oxygen in the oxide, i.e .ω(O) = 0.2224
Now the mass percentage of oxygen in the oxide multiplied by 100 ten we get the mass of oxygen in the oxide. If we take 100 grams of compound:
1) m(O) = ω(O) * 100 g.
Mass of oxygen in the oxide, i.e. m(O) = 0.2224 * 100 g.
Mass of oxygen in the oxide. i.e., m(O) =22.24g
Amount of oxygen, i.e.,
n(O) = mass of oxygen in the oxide ÷ molar mass of oxygen.
n(O) = m(O) ÷ M(O) amount of oxygen
n(O) = 22.24g ÷ 16 g/mol,
amount of oxygen i.e. n(O) = 1.39 mol
Mass of metal in the oxide, i.e., m(M) = 100 g - 22.24 g.
Mass of metal in the oxide i.e., m(M) = 77.76g
Now we to find the molar mass of metal oxide,
Molar mass of the metal :
= mass of metal in the oxide ÷ amount of oxygen(M)
= m(M) ÷ n(M). M(M)
= 77.76 g ÷ 1.39 mol.
Molar mass of the metal will be 5.94 g/mol.
Therefore, The identity of the metal is lead (Pb).
To know more about metals, refer to below link:
https://brainly.com/question/2874869
#SPJ1
How many moles of Ne are contained in a 5.00 L tank at 155°C and 2.80 atm?
There will be 0.39 moles
Take a look at the He gas in the tank:
P = 2.80 atm, or pressure
Volume = 5.00 liters.
T = (273 + 155) is the temperature. K = 428 K
R = 0.08206 L atm/L of gas (mol K)
Charle's law, Boyle's law, and Gay-Lussac law are the three gas laws that make up the combined gas law, commonly referred to as a general gas equation. For a certain amount of gas, the law illustrates the relationship between temperature, volume, and pressure.
Gas law PV = nRT
So, n = PV/. (RT)
He gasses number = 2.80 x 5.00 / (0.08206 x 428) mol equals 0.39 mol.
Learn more about Gas law here-
https://brainly.com/question/12667831
#SPJ9
How can some fish change their
depth in the water column?
Answer:
skill
Explanation:
Answer: The more air a fish swim bladder contains, the higher the fish will suspend or float in the war.
Explanation:
The emission spectrum of cesium contains two lines whose frequencies are (a)
3.45 xx 10¹4 Hz and (b) 6.53 xx 10¹4 Hz. What are the wavelengths and energies per
photon of the two lines? What color are the lines?
The lines are violet and blue respectively.
What is the energy?We know that the energy of the photon could be obtained by the use of the equation;
E = hf
E = energy
h = Plank's constant
f = frequency
For the first line;
E = 6.6 * 10^-34 Js * 3.45 x 10^14 Hz = 2.3 * 10^-19 J
Given that;
E = hc/λ
λ = hc/E
λ = 6.6 * 10^-34 * 3 * 10^8/2.3 * 10^-19
λ = 8.61 * 10^-7 m or 861 nm
The color is violet
For the second line;
E = 6.6 * 10^-34 Js * 6.53 xx 10^14 Hz
E = 4.3 * 10^-19 J
E = hc/λ
λ = hc/E
λ = 6.6 * 10^-34 * 3 * 10^8/4.3 * 10^-19
λ = 4.60 * 10^- 7 m or 460 nm
The color is blue
Learn more about emission spectrum:https://brainly.com/question/13537021
#SPJ1
A nugget of gold occupies 5.64 mL of water and weighs 108.8521g. Its density is
The density of a nugget of gold which occupies 5.64 ml of water and weighs 108.85 g is 19.29 g/cm^3.
The density of a gold nugget can be calculated by using the following formula:
Density of nugget = Mass of gold nugget/Volume occupied by gold nugget
Here,
the mass of gold is given to be 108.85 grams and the volume occupied by gold is given to be 5.64 ml or 5.64 cm^3.
Putting these values in the above equation
Density = 108.85 g / 5.64 cm^3
Density = 19.29 g/cm^3
Thus, the density of a nugget of gold which occupies 5.64 ml of water and weighs 108.85 g is 19.29 g/cm^3.
To know more about "gold", refer to the following link:
https://brainly.com/question/14669985?referrer=searchResults
#SPJ1
