Hydrophilic molecules that are to be released by cells are stored in membrane-bound structures called Secretory vesicles.
The secretory vesicle is a vesicle that mediates the vesicular delivery of cargo - e.g. hormones or neurotransmitters - from an organelle to particular web websites on the molecular membrane, in which it docks and fuses to launch its content.
Secretory vesicles shape from the trans-Golgi network, and they launch their contents to the molecular outside with the aid of using exocytosis in reaction to extracellular signals. The secreted product may be both a small molecule (together with histamine) or a protein (together with a hormone or digestive enzyme).
Vesicles are small systems inside a molecule, together with fluid enclosed with the aid of using a lipid bilayer worried in delivery, buoyancy control, and enzyme storage.
Learn more about Secretory vesicles here;
https://brainly.com/question/16633637
#SPJ4
A tetrahedral carbon is ____________ hybridized while a linear carbon is ____________ hybridized.
A tetrahedral carbon is sp3 hybridized while a linear carbon is sp hybridized.
Carbon is a chemical element with the symbol C and atomic number 6. It is a non-metal and is tetravalent. That atom donates four electrons to form a covalent chemical bond. It belongs to group 14 of the periodic table. Carbon makes up only about 0.025% of the Earth's crust.
Carbon is an essential element for all life forms on earth. Carbon uptake and release are part of all plant and animal life, whether these life forms take up carbon to help make food or release carbon as part of respiration. Carbon is constantly moving from place to place. Carbon is also found in fossil fuels such as petroleum (crude oil), coal, and natural gas. Carbon is also found in dead, decaying animals and animal waste soils. Carbon is stored in the biosphere of plants and trees.
Learn more about carbon here
https://brainly.com/question/141693
#SPJ4
The action potentials of myocardial autorhythmic cells, are due to a combination of increasing Na+ and Ca2+ ________ and decreasing k ________.
The action potentials of myocardial autorhythmic cells, are due to a combination of increasing Na⁺ and Ca²⁺ influx and decreasing K⁺
efflux .
The autorythmic cells are concentrated in many areas such as:
Sinoatrial (SA) node which is located in the upper wall of the right atrium (auricle). It initiates the cardiac cycle by generating an action potential spreading throughout both atrium via gap junctions of the cardiac muscle fibers.
These autorhythmic cells have unique ability to depolarize spontaneously, which results in a pacemaker potential. Channels of cardiac autorhythmic cells are responsible for the electrical signal that triggers heart contraction.
Autorhythmic cells begin depolarizing due to a slow continuous influx of Na⁺ and Ca²⁺, and a reduced efflux of K⁺.
Several protein channels are embedded in the plasma membrane of an autorhythmic cell that allows ions to move in and out of the cell. These are important for generating action potential.
Sodium channels : allow Na⁺ ions to enter cellFast calcium channels : allow Ca²⁺ ions to enter cellPotassium channels : allow K⁺ ions to leave the cellTo learn more about autorhythmic cells,
https://brainly.com/question/15517377
#SPJ4
Consider the following: you mix 7.60 ml of ( = 1.492 g/ml) and 6.50 ml of ( = 2.890 g/ml), giving 14.1 ml of solution. what is the density of this mixture?
The 14.1 ml solution has a density of 2.1365 g/ml.
Density is defined as the ratio between the mass of a substance and the volume it occupies. Denoted by ρ, density is mass per unit volume and the formula is given below:
ρ = mass / volume
To solve for the density of a mixture or solution of two substances with different densities, the mass and volume of each substance must be known, as:
ρ mix = (M1 + M2) / (V1 + V2)
The volume and densities of the two given substances are known and can be used to solve for the unknown mass of each substance.
M1 = ρ x V1
M1 = 1.492 g/ml x 7.60 ml
M1 = 11.3392 g
M2 = ρ x V2
M2 = 2.890 g/ml x 6.50 ml
M1 = 18.785 g
Solving for the density of the mixture,
ρ mix = (M1 + M2) / (V1 + V2)
ρ mix = (11.3392 g + 18.785 g) / (7.60 ml + 6.50 ml)
ρ mix = 30.1242 g / 14.1 ml
ρ mix = 2.1365 g/ml
To learn more about density of mixtures: https://brainly.com/question/28037379
#SPJ4
J. j. thomson studied cathode ray particles (electrons) and was able to measure the mass/charge ratio. his results showed that?
His results showed that matter included particles much smaller than the atom.
J. J. Tomson concluded that atoms are divisible and that the corpuscles are their building blocks.
Atoms are made up of smaller particles.
J. J. Thomson discovered the electron ( the negative charges of the atom) in 1897.
His "plum pudding" model (1904) suggested: the electrons are embedded in the positive charge and evenly distributed throughout the entire atom.
With this model, he abandoned his earlier hypothesis that the atom was composed of immaterial vortices.
Later, scientist Rutherford demonstrate that J.J Thompson's Plum Pudding model was not accurate.
More info about the Thomson’s plum pudding model: brainly.com/question/6319700
#SPJ4
Why does the first ionization energy generally increase across a period for the main group elements?
Ionization energy : the minimum amount of energy demands to detach an electron from an isolated atom.
Ionization energy also known as potential energy.
The charge of the nucleus increases from side to side in a row and so there is an increase in the attraction in the middle of the nucleus and the surrounding electrons. As we move from side to side in a periodic table from left to right, the nuclear charge increases. This is because of increasing nuclear charge, which concludes in the topmost electron being more strongly leap to the nucleus.
To know more about Ionization energy here :
https://brainly.com/question/16243729?referrer=searchResults
#SPJ4
When 2.16g of mercuric oxide is heated, it decomposes to yield 2.00g of mercury and 0.16g of oxygen. which law is supported by this experiment?
The experiment described in the question given above supports the law of conservation of mass.
What is Decomposition?In chemistry, decomposition may be defined as a type of chemical reaction through which one reactant molecule significantly breaks down into two or more product molecules.
The same concept is applied in the question as well where the heating of mercuric oxide produces mercury and oxygen. According to the question, the mass of the reactant is equal to 2.16g, while the mass of the product is equal to 2.00 g plus 0.16 g which is togetherly 2.16 g.
Therefore, the experiment described in the question given above supports the law of conservation of mass.
To learn more about the Law of conservation of mass, refer to the link:
https://brainly.com/question/19038178
#SPJ4
A particular vitamin's chemical formula has one cobalt atom. What is the molar mass of the vitamin if it contains 4.34% cobalt?
The molar mass of vitamin if it contains 4.34% of cobalt is 1358 g/mole.
How is molar mass calculated?
Molar mass is the mass of 1 mole of the compound.One mole of compound contains Avogadro's number of molecules.So,molar mass is mass of Avogadro's number of molecules.
Molar mass is also defined as mass of the sample divided by the amount of substance, measured in moles .It is a bulk quantity not a molecular property of substance. The SI unit of molar mass is kilogram per mole.
In this problem,vitamin has 1 cobalt atom .The atomic mass of cobalt is 58.93 g/mole.So according to the definition,mass of 1 mole of cobalt is 58.93 g =4.34% mass of 1 mole of vitamin.
To find 100% mass of 1 mole of vitamin
58.93/4.43×100=1358 g
Hence,the molar mass of vitamin is 1358 g.
To learn more about molar mass click here:
https://brainly.com/question/13152455
#SPJ1
What is the definition of Buffer solution !!
Answer:
a solution which resists changes in pH when acid or alkali is added to it is known as Buffer solution
A first-order reaction that results in the destruction of a pollutant has a rate constant of 0.1/day. how many days will it take for 68 percent of the chemical to be destroyed?
In a first-order reaction, it takes 23.02 days for 68 percent of the chemical to be destroyed.
Given,
fee constant for the destruction of pollutant = 0.1/day
We ought to discover the number of days it'll take for sixty eight percent of the chemical to be destroyed.
[A] = [A]₀e^⁻kt
in which [A] is the present awareness, and
[A]₀ is the initial awareness
k is the price of decrement
[A]₀ = 1
[A] = 0.1
Or, t =㏑(10)/k
Or, t = 2.302/zero.1
Or, t = 23.02 days.
for this reason the wide variety of days required for the destruction of sixty eight percent of chemicals is 23 days.
To learn more about the first-order reaction, visit: https://brainly.com/question/10898529
#SPJ4
Element Arrangement Quick Check
Why is it impossible for an element to have an atomic number of 110.5? (1 point)
A)Atoms with atomic numbers greater than 100 are unstable.
B)Exactly half of the isotopes would need an atomic number of 110, and half would need an atomic number of 111, which is very unlikely.
C)Atoms of an element all have the same whole number of protons.
D)Atoms of an element all have the same whole number of protons and neutrons.
It is impossible for an element to have an atomic number of 110.5 because atoms of an element all have the same whole number of protons. Thus, option C is correct.
What is an atomic number of an element?The atomic number is the number of protons in the nucleus of an atom. The number of protons defines the identity of an element. The atomic number of an atom is equal to the number of protons in the nucleus of an atom or the number of electrons in an electrically neutral atom.
For example, in a sodium atom, there are 11 electrons and 11 protons.
Thus, the atomic number of Na atom = number of electrons = number of protons is equal to 11.
The atomic number is based only on the number of protons in the nucleus of an atom. Since this is a count of whole numbers, it cannot be a decimal. It's either element 110 or 111, not 110.5.
There is no half proton in the atom, hence we can not have an atomic number of 110.5.
To learn more about atomic number of elements, refer to below link:
https://brainly.com/question/14190064
#SPJ2
When nad becomes nadh, it is being? oxidized and releasing chemical energy. reduced and gaining chemical energy. oxidized and gaining chemical energy. reduced and releasing chemical energy.
When NAD becomes NADH, it is being reduced and gaining chemical energy.
Nicotinamide adenine dinucleotide (NAD), a coenzyme, can exist in two forms, NAD⁺ (oxidized) and NADH (reduced form).
Electrons and protons released in catabolism reactions are attached to NAD⁺. The conversion of NAD⁺ to NADH is important reaction for production of ATP during the cellular respiration.
Reduction is lowering oxidation number because element, ion or compound gain electrons.
Chemical equation for reaction of reduction of NAD⁺ (see picture below):
NAD⁺ + 2e⁻ + H⁺ → NADH
Nicotinamide adenine dinucleotide (NAD) is made of two nucleosides joined by pyrophosphate.
More about reduction :brainly.com/question/25334331
#SPJ4
Which of the following demonstrates a chemical change? (1 point)
• dry ice vaporizing
•
iron (Fe) reacting to water((H,O)) and
oxygen(O) to form iron oxide(Fe2Og)
O sugar and water mixing to create sugar water
• steam condensing on a mirror
The reaction that demonstrates a chemical change is iron (Fe) reacting to water((H,O)) and oxygen(O) to form iron oxide(Fe2Og). That is option B.
What is a chemical change?A chemical change is defined as the change that occurs when two substances reacts or combines to form an entirely new product.
The following are the features that shows that a chemical change has taken place. They include:
colour change, precipitate formation, gas formation, smell change, andchange in temperature.When the above signs are seems there is every reason to accept the fact that a chemical change has occurred in the chemical reaction that took place.
From the chosen option, the reactants and product of the chemical reaction are:
Iron (Fe) + water (H2O) --> iron oxide(Fe2Og)
This reaction is a chemical reaction as the product formed leads to a colour change known as rust.
Learn more about chemical change here:
https://brainly.com/question/19794032
#SPJ1
Why do we emphasize the valence electrons in an atom when discussing atomic properties?
We emphasize the valence electrons in an atom when discussing atomic properties, as they are most accessible to other atoms.
What are valence electrons?The valence electrons are the electrons that are present in the outer shell of the atoms. These electrons are free for making bonds with the electrons of other atoms.
Electrons are joined with other electrons to make a compound. These electrons are shared by or gained by other atoms.
Thus, when discussing atomic qualities, we focus on the valence electrons in an atom since they are the most receptive to other atoms.
To learn more about valence electrons, refer to the link:
https://brainly.com/question/13993867
#SPJ4
What is the atomic number of an atom that has 6 protons, 6 neutrons, and 6 electrons? quzket
The atomic number of an atom that has six protons, six neutrons, and six electrons is 6. And the element is carbon.
Carbon is known as a tetravalent compound.
It has four electrons in its outermost shell. It forms a covalent bond with other compounds.
The number of neutrons. = 6
Number of electrons = 6
Number of protons = 6
So the atomic number of the compound is,
The atomic number of an element = Number of protons present in its nucleus
The number of protons given in the compound is 6.
So the atomic number of the compound is also 6.
Carbon has six atomic numbers.
Therefore, the atomic number of an atom that has six protons, six neutrons, and six electrons is 6. And the element is carbon.
To know more about electrons, refer to the below link:
https://brainly.com/question/1255220
#SPJ4
What is the mass of an object with a density of 1.35 g/ml & a volume of 24 ml?
The mass of an object with a density of 1.35 g/ml & a volume of 24 ml is 32.4 g/ml.
What is mass?
Mass is the quantity of matter in a physical body.
The product of the molar mass of the compound and the moles of the substance are defined as mass.
Density is the mass per unit volume. Volume is the space taken by an object. Density, mass, and volume are interrelated to each other.
Given, that the density is 1.35 g/ml
The volume is 24 ml
The formula is
mass = volume x density
mass = 24 x 1.35 = 32.4
Thus, the mass of the object is 32.4 g/ml.
To learn more about mass, refer to the link:
https://brainly.com/question/13799762
#SPJ4
Most combustibles, when burned with just the stoichiometric amount of air, under conditions where no heat is lost, will produce flames at what temperature range?
Most combustibles, when burned with just the stoichiometric amount of air, under conditions where no heat is lost, will produce flames between the temperature range of 2100-2300 K.
What do you understand about the process of Combustion?Combustion is a chemical process in which a substance reacts rapidly with oxygen and gives off heat. The original substance is referred to as the fuel and the oxygen's source as the oxidizer. Although it is typically a liquid for airplane propulsion, the fuel can be a solid, liquid, or gas. However, combustion is a chemical reaction between substances, usually including oxygen, and usually accompanied by the generation of heat and light in the form of flame.
To learn more about Combustion, visit:
https://brainly.com/question/15117038
#SPJ4
Which food contains at least 100 mcg of folate per serving? one, some, or all responses may be correct.
One-half cup of black-eyed peas contains at least 100 mcg of folate per serving.
In infants and the women with poor folic acid intakes, the neural tube defects (NTDs), or failures in the closure of the neural tube are more common. For the normal formation of the spinal cord, proper closure of the neural tube is required.
Within the first month of gestation, the neural tube begins to close, often before a person realizes that she is pregnant.
Therefore, 0.4 mg of folic acid should be taken every day, while consuming dietary sources of folate, i.e. intake of folate rich diet/meal by all people who are capable of becoming pregnant.
One-half cup of black-eyed peas contains at least 100 mcg of folate. Ready-to-eat breakfast cereal contains 200 mcg of folate and a slice of bread contains 20 mcg, and not 100 mcg of folate. One-half cup of broccoli and a cup of pasta contain 50 mcg, not 100 mcg of folate.
Complete question is-
Which food contains at least 100 mcg of folate per serving? one, some, or all responses may be correct.
1. Bread
2. Broccoli
3. Cooked pasta
4. Black-eyed pasta
5. Ready-to-eat breakfast cereal
To learn more about folate,
brainly.com/question/10228312
#SPJ4
At which bond would water need to be added to achieve hydrolysis of the peptide, back to its component amino acid?
The peptide bond is broken by the hydrolysis of water. The hydrogen ion of water goes to the -NH end (shown to the right of bond C) and the hydroxyl Ion of water goes to the -CO ends (shown to the left of bond C), resulting in the breakdown of peptide Bond and formation of individual amino acid.
The reaction of water with another compound forms two or more products. Some examples of hydrolysis include dissolving salts of weak acids or weak bases in water or dissolving sulfuric acid in water to form hydronium and bisulfate compounds.
The difference between hydration and hydrolysis is that hydrolysis is the process of breaking a bond with water whereas hydration is defined as an electrophilic addition reaction without breaking the original molecule. During hydration, water molecules are added to the substance. A chemical decomposition process that involves breaking bonds and adding hydrogen cations and hydroxide anions of water.
Learn more about hydrolysis here
https://brainly.com/question/4352413
#SPJ4
(e) A 0.050 mol sample of a hydrocarbon was burned in excess oxygen.
The products were 3.60 g of water and 6.60 g of carbon dioxide.
(i) Calculate the number of moles of carbon dioxide produced.
Relative atomic masses: C = 12; O = 16.
Moles of carbon dioxide =
*
(2)
The correct answer is 0.15.
We are aware that there is 0.05 mol of an unidentified hydrocarbon we will refer to as "X" and that its burning produces 6.6 g of carbon dioxide and 3.6 g of water.
These quantities might be converted to moles by applying the following formula:
amount= mass/ relative atomic mass
Thus, the following equation may be written for H2O: moles = 3.6 / 18 = 0.2 and for CO2: moles = 6.6 / 44 = 0.15.
0.05X + x'O2 = 0.15CO2 + 0.2H2O
This may be made simpler by dividing through by 0.05 (this step is likely to be the most helpful to you), resulting in:
1 x + x O2 = 3 co2 + 4 H2O
The hydrocarbon must have been the source of all the carbon in the carbon dioxide and all the hydrogen in the water.
Accordingly, 4 x 2 = 8 moles of H and 3 x 1 = 3 moles of C.
There are 3/1 = 3 Cs and 8/1 = 8 Hs in one X molecule.
This clearly identifies C3H8 or propane as the hydrocarbon X (dividing by 1 seems unnecessary, but it illustrates the process to use if there were more than one mol of X in the first equation).
To learn more about number of moles of carbon dioxide refer the link:
https://brainly.com/question/12723070
#SPJ9
True or false: Chemical properties can be observed only when the substances in a sample of matter are changing into different substances.
An amino acid consists of an amino group at one end and which group at the opposite end?
Answer:
Carboxylic acid group
Explanation:
Carboxylic acid and amine groups form the basis of an amino acid. One group reacts with the other group on a neighboring amino acid to form the peptide bond, with the release of a water molecule.
When you purchase 0.500 gallon of milk, how many milliliters (ml) of milk are there in the container? (1 gallon = 3.785 l).
When you purchase 0.500 gallon of milk, 7.89mL of milk are there in the container
Unit of liquid capacity equal to four quarts or 231 cubic inches or 3.785 liters called gallon. here 1 gallon = 3.785 l and you purchase 0.500 gallon so multiply the no of cubit feet by 7.47 then and here
volume is 8 then 8×7.47=59.76 so
1 gallon = 3.785=59.76÷3.785=15.78
15.78×0.0500gallon=7.89ml
Know more about gallon
https://brainly.com/question/28493716
#SPJ4
A central theme in chemistry is that we study ______ changes in matter to understand their ______ causes.
A central theme in chemistry is that we study Observable changes in matter to understand their Unobservable causes.
Matter is a substance made up of a variety of sorts of particles that occupies physical house and has inertia. According to the standards of current physics, the a variety of sorts of particles every have a particular mass and size. The most acquainted examples of fabric particles are the electron, the proton and the neutron.
Learn more about Matter here:
https://brainly.com/question/4513444
#SPJ4
According to bohr's model, when does an electron emit electromagnetic radiation?
According to Bohr's model, electron emit electromagnetic radiation when an electron moves from the higher energy orbit to the lower energy orbit of an atom.
Niels Bohr (1885–1962) proposed a model for the hydrogen atom that explained its atomic emission spectrum.
According to the Bohr model of the atom:
1. Energy levels of electrons are discrete (certain discrete values of energy), that is why hydrogen shows discrete, bright, colored lines.
2. Electrons orbit the nucleus in orbits that have a set size and energy.
3. Electrons can jump from one energy level to another, absorbing or emitting electromagnetic radiation with a frequency ν (energy difference of the levels).
More about Bohr's model: brainly.com/question/18002213
#SPJ4
Given what you know of the acid base chemistry of hf, what is the concentration of hf in an aqueous solution with a ph of 5.89?
Hydrofluoric acid, HF in an aqueous form having molecular weight of 20.01 have concentration of 48-50% w/w in aqueous solution/water with a pH of 5.89.
HF in an aqueous solution ionizes like the other acids. It is extremely corrosive. It dissociates in water as -
HF + H₂O ⇆ H₃O⁺ + F⁻
Hydrofluoric acid is much stronger when concentrated. If concentration increases and approach to 100%, the acidity of acid increases and the base forms a bond.
3HF ⇆ H₂F⁺ + HF₂⁻
The presence of hydrogen ion in an aqueous solution makes the HF acidic. HF is soluble with boiling point 19.5°C and melting point 0f -83.6°C
To learn more about HF,
brainly.com/question/3102869
#SPJ4
Solution of known concentration that is slowly added to a solution of unknown concentration.
A solution of known concentration that is slowly added to a solution of unknown concentration is called titrant.
Titration is the steady addition of a known concentration solution (called a titrant) to a known volume of an unknown concentration solution until the reaction approaches neutralization, which is sometimes indicated by a color change.
Until the reaction is complete, the analyte (the unknown solution) is normally added in a known amount to the titrant (the known solution) through a buret. Knowing the volume of titrant added allows the concentration of the unknown to be calculated. An indicator is often used to indicate the reaction's endpoint or end of reaction.
Therefore, titration is a technique used to determine the concentration of an unknown solution.
Read more about Titration:
https://brainly.com/question/16254547
#SPJ4
According to the bohr model, what is the energy change in joules that occurs when an electron falls from the n = 4 to the n = 2 energy level in a hydrogen atom?
According to the bohr model, the energy change in joules that occurs E=−1.36×10∧−19J, when an electron falls from the n = 4 to the n = 2 energy level in a hydrogen atom.
What is bohr model ?The Bohr model, also known as the Rutherford-Bohr model, was first proposed by Niels Bohr and Ernest Rutherford in 1913 and describes an atomic system with an orbiting system of electrons and a small, dense nucleus that is similar to the Solar System in structure but is attracted by electrostatic forces rather than gravity.
1) The orbits of the electrons surrounding the nucleus are circular and have a constant energy.
2) The electron only rotates in orbits with angular momentum greater than or equal to nhi/2π³.
Only when an electron transitions from one orbit to another can energy become realised or absorbed in the form of a photon.
To learn more about bohr model go to -
https://brainly.com/question/4138548
#SPJ4
The absolute pressure in a compressed air tank is 180 kpa. what is this pressure in psia?
The absolute pressure in a compressed air tank is 180 kpa. pressure in psia is 26.10 psia
The pressure of having no matter inside a space, or a perfect vacuum called absolute pressure. it indicates how much higher your process pressure is than that of a process in vacuum, so measurements are always positive. for calculate pressure
P=(180kPa)(1 psia/6.895 kPa) = 26.10 psia
Know more about absolute pressure
https://brainly.com/question/28499300
#SPJ4
An instrument can determine the half-life of an element with a 0.8% error. Radon-220 has a half-life of 52 s. What is the absolute error that could be expected measuring the half-life of radon-220?
The absolute error that could be expected when measuring the half-life of radon-220 is 0.416 s
Data obtained from the questionThe following data were obtained from the question:
Percentage error = 0.8%Actual measurement = 52 sAbsolute error =?How to determine the absolute error in measuring the half-lifeWe can obtaine the absolute error as illustrated below:
Percentage error = (Absolute error / Actaul measurement) × 100
0.8% = Absolute error / 52
0.008 = Absolute error / 52
Cross multiply
Absolute error = 0.008 ×52
Absolute error = 0.416 s
Thus, the absolute error in measuring the half-life is 0.416 s
Learn more about error:
https://brainly.com/question/24202332
#SPJ1
A solution has an H3O+ concentration of 3.5 x 10^-5 M. Is it acidic or basic?
What is the pH of a 4.0 x 10^-3 M solution of NaOH?
How many grams of NaCl can be formed if 10.0 mL of a 0.20 M HCl sample is mixed with 10.0 mL of a 0.40 M NaOH sample?
The mass of NaCl produced is 0.117 g.
What is the pH?The pH of a solution is what tells us if the solution is acidic or basic. The solution is acidic if the pH of the solution is less than 7.
1) pH = - log(3.5 x 10^-5 M)
= 4.45
Thus the solution is acidic.
2) We can see that the concentration as given is the concentration of OH^-
[OH ] = 4.0 x 10^-3 M
pOH = -log (4.0 x 10^-3 M)
pOH = 2.39
pH = 14 - 2.39
pH = 11.61
The equation of the reaction is; [tex]NaOH + HCl ----- > NaCl + H2O[/tex]
Number of moles of NaOH = 0.40 M * 10/1000 = 0.004 moles
Number of moles of HCl = 0.20 M * 10/1000 = 0.002 moles
We can see that HCl is the limiting reactant
Mass of NaCl produced ;
0.002 moles * 58.5 g/mol = 0.117 g
Learn more about reaction:https://brainly.com/question/3588292
#SPJ1
