We need 140 mL of 0.656 M HNO3 to dissolve 6.31 g of BaCO3.
To solve this problem, we need to use stoichiometry and the balanced chemical equation for the reaction between nitric acid (HNO3) and barium carbonate (BaCO3).
The balanced equation is:
2HNO3(aq) + BaCO3(s) → Ba(NO3)2(aq) + H2O(l) + CO2(g)
From this equation, we can see that 2 moles of HNO3 react with 1 mole of BaCO3. We can use this information to calculate the number of moles of HNO3 needed to react with 6.31 g of BaCO3.
First, we need to calculate the number of moles of BaCO3:
molar mass of BaCO3 = 137.33 g/mol
moles of BaCO3 = mass / molar mass = 6.31 g / 137.33 g/mol ≈ 0.046 mol
Since 2 moles of HNO3 react with 1 mole of BaCO3, we need 2 x 0.046 = 0.092 moles of HNO3.
Now we can use the molarity of the HNO3 solution to calculate the volume needed:
Molarity = moles of solute / volume of solution (in liters)
0.656 M = 0.092 mol / volume of HNO3 solution (in liters)
Solving for volume of HNO3 solution, we get:
volume of HNO3 solution = 0.092 mol / 0.656 M = 0.140 L = 140 mL
For such more questions on Molarity
https://brainly.com/question/17138838
#SPJ4
why is it more accurate to standardize the naoh with khp than to standardize with a solution of hcl?
It is more accurate to standardize the NaOH with KHP than to standardize with a solution of HCl because it is stable under the acid base reaction conditions and has a high molecular weight.
Titration processes may occasionally claim a standardization process to regularize a secondary standard using a primary standard. This is because a secondary standard is what will be used in the titration of a certain analyte and its original attention may not be known directly beforehand.
Strong base solutions need to be standardised since chemicals like NaOH will inadvertently pick up moisture from the air and react with gases like CO2 to produce undesired contaminants in the base's stock sample. As a result, we cannot be certain that the mass of NaOH pellets we measure to create a desired solution is the mass of NaOH itself. The bulk consists of all of the impurities together. As a result, we cannot be certain of the base concentration in the solution we make.
Learn more about Solution of KHP:
https://brainly.com/question/15411716
#SPJ4
What are atoms of the same element that have different mass numbers?
Answer: ISOTOPES
Explanation:
isotopes are different types of the same element, this could be because they have an extra neutron, for example.
however, this does not apply to atoms that lose or gain electrons.
for example, Hydrogen has an isotope called Deuterium (or Hydrogen-2) and Tritium (Hydrogen-3).
Select all the correct answers.
Which observation shows that a change in state of matter has occurred?
A) Wood burns, producing gas and an ashy residue.
B) Overnight, dew forms on the grass.
C) An alkali indicator changes color when added to a cleaner.
PLEASE BE ACCURATE!! THANK YOU!!:)
The observation that shows a change in state of matter has occurred is option A) Wood burns, producing gas and an ashy residue.
A change in state of matter refers to the transformation of a substance from one physical state to another, such as from solid to liquid, liquid to gas, or vice versa. In option A, when wood burns, it undergoes a chemical reaction known as combustion.
During combustion, the wood reacts with oxygen in the air and undergoes a transformation from a solid state to a gaseous state, producing gas (such as carbon dioxide and water vapor) as well as an ashy residue (solid carbon and other impurities remaining after the combustion process). This change in state is accompanied by the release of heat and light.
Option B, where dew forms on the grass overnight, does not indicate a change in state of matter. Dew formation is a physical process known as condensation, where water vapor in the air cools down and changes into liquid water droplets upon contact with a colder surface (such as grass). In this case, the state of matter remains the same (from a gaseous state to a liquid state), and no new substances are formed.
Option C, where an alkali indicator changes color when added to a cleaner, also does not represent a change in state of matter. It suggests a chemical reaction between the alkali indicator and the cleaner, resulting in a color change. However, the states of matter involved (liquid or solid) do not change during this process.
In summary, option A is the observation that indicates a change in state of matter, as it involves the transformation of wood from a solid state to a gaseous state during combustion.
For more such question on matter visit:
https://brainly.com/question/1172629
#SPJ8
Which four of the following statements about amino acids are true?A. Methionine is a thiolB. Asn and Gln are polar amino acidsC. Phe can undergo oxidation to form TyrD. Alanine has an overall charge at physiological pH (7.4)E. Isoleucine has more than one stereocenter (chiral center)F. The Val side chain does not form hydrogen bonds with other amino acidsG. The form of glycine used by the human body is D-glycine
As and GIn are polar amino acids, They are polar because they have polar bonds and hydrogen bonds. Phe can undergo oxidation to Tyr, Isoleucine has more than one stereocenter
No hydrogen bonds are formed between the Val side chain and other amino acids. since there isn't any active hydrogen
Proteins are made up of amino acid molecules. proteins and amino acids are components of life.
The breakdown or digestion of proteins produces amino acids as a byproduct. Proteins are created by the human body from amino acids to support the body:
Deconstruct food
Grow
mending bodily tissue
perform several other bodily tasks
The body may generate energy from amino acids as well.
Three categories are used to organise amino acids:
Important amino acids
Unneeded amino acids
amino acids with conditions
Learn more about Amino acid here:
https://brainly.com/question/15687833
#SPJ4
based on the information from the periodic table, which mistake did darrell make on his diagram? a nitrogen should have six electrons instead of seven. b nitrogen should have eight protons instead of six. c nitrogen should have seven protons instead of six. d nitrogen should have eight electrons instead of seven.
Nitrogen is 7th element in periodic table. It contains 7 electrons and 7 protons .Hence, nitrogen should have seven protons instead of six.
What is nitrogen ?Nitrogen is 7th element in periodic table. It is located in the 15th group of p -block in periodic table. Nitrogen exists in the gaseous state thus it is a non-metallic element.
The atomic number of an element is the number of electrons in its atom in the neutral state. For a neutral atom, the number of electrons is equal to the number of protons of the atom.
Hence, nitrogen has the atomic number of 7 implies it contains 7 electrons and 7 protons. Therefore, nitrogen should have seven protons instead of six.
Find more on nitrogen:
https://brainly.com/question/16113371
#SPJ1
What is defined as the mass of a substance per mole of that substance?
The mass of a substance per mole of that substance is defined as its molar mass. The molar mass of a substance is the mass in grams of one mole of that substance and is usually expressed in grams per mole (g/mol).
The molar mass of a substance is used to convert between the number of moles of a substance and its mass, which can be useful in various chemical calculations and reactions. For example, if you know the molar mass of a substance, you can calculate the number of moles present in a given mass of that substance by dividing the mass by the molar mass.
In addition to its use in chemical calculations, the molar mass of a substance is also used in determining the density of a substance, as well as in various other physical and chemical properties. The molar mass can also be used to compare different substances, as substances with a larger molar mass typically have different physical and chemical properties than substances with a smaller molar mass.
Learn more about density here:
https://brainly.com/question/29775886
#SPJ4
What is meant by redox reaction?
Answer:
A redox reaction, also known as oxidation-reduction reaction, is a type of chemical reaction in which the oxidation state of a molecule changes due to the transfer of electrons from one molecule to another molecule.
Answer:
A chemical reaction that takes place between an oxidizing substance and a reducing substance.
Explanation:
approximately what proportion of earth’s crust is composed of the elements oxygen and silicon?
Oxygen and silicon are the two most abundant elements in the Earth's crust, making up approximately 75% of the crust by weight.
The Earth's crust is composed of various elements, but two of the most abundant ones are oxygen and silicon. Oxygen is the most abundant element on Earth, and it makes up about 47% of the Earth's crust by weight. It is found in minerals like quartz, feldspar, and mica, and is an essential component of the Earth's atmosphere and biosphere.
Silicon is the second most abundant element in the Earth's crust and accounts for about 28% of its weight. It is found in minerals such as quartz, feldspar, and mica, and is also a key component in many human-made products, including computer chips and solar panels.
Together, oxygen and silicon make up approximately 75% of the Earth's crust by weight. Other significant elements include aluminum, iron, calcium, sodium, and potassium, while trace elements such as copper, zinc, and gold are present in small amounts. Understanding the composition of the Earth's crust is important for fields such as geology, mineralogy, and environmental science.
To learn more about geology Click here:
brainly.com/question/7978853
#SPJ4
MARKING BRAINLEIST!!
Which is true about scientific theories? (2 points)
A. They are the result of a single experiment.
B. They are the results of many experiments over a long period of time.
C. They are proposed by scientists who wish to investigate a new topic.
D. They are only based on the most recent evidence.
The correct option stating about the scientific theories is option B that says they are results of many experiment over a long period of time.
A scientific theory is a study given by an observer by performing many experiments on a particular object over a large period of time.
For an example take Ohm's law, Ohm's law was not something that could be determined in a single experiment took a very large persistence and a very long period of time in order to come to the conclusion that the applied potential difference is directly proportional to the electric current passing through the conductor and there is a certain property inside every conductor that resist the flow of charge and that is Resistance.
The scientific theories when prove and correctly becomes a law and ohm's law one of them.
To know more about scientific theories, visit,
https://brainly.com/question/11555274
#SPJ4
in water, 1 mol of al(clo3)3 (aq) will dissociate into which ions?
In water, 1 mol of Al(ClO₃)₃ (aq) will dissociate into two moles of Al³⁺ ions and three moles of ClO³⁻ions.
In water, 1 mol of Al(ClO₃)₃ (aq) will dissociate into the following ions: Al³⁺and ClO³⁻.
When Al(ClO₃)₃ is dissolved in water, it will dissociate into its constituent ions. The Al³⁺ ion will separate from the three ClO³⁻ ions. This process is known as dissociation and is a common occurrence when ionic compounds are dissolved in water.
The resulting solution will contain Al³⁺ and ClO³⁻ions that are free to move around and interact with other ions in the solution. In summary, 1 mol of Al(ClO₃)₃ (aq) will dissociate into 1 mol of Al³⁺ ions and 3 mol of ClO³⁻ ions in water.
Learn more about dissociate at https://brainly.com/question/9187417
#SPJ11
22.3.2 Test (CST): The Solar System
Question 7 of 10
In which coastal area is the tide rising to form a high tide?
A. One that is rotating toward the Sun
B. One that is rotating toward the Moon
C. One that is rotating away from the Moon
D. One that is rotating away from the Sun
In an ecosystem, the coastal area that is rotating toward the moon is the area where tide rising to form a high tide.
What is an ecosystem?
Ecosystem is defined as a system which consists of all living organisms and the physical components with which the living beings interact. The abiotic and biotic components are linked to each other through nutrient cycles and flow of energy.
Energy enters the system through the process of photosynthesis .Animals play an important role in transfer of energy as they feed on each other.As a result of this transfer of matter and energy takes place through the system .
Learn more about ecosystem,here:
https://brainly.com/question/1673533
#SPJ1
chemistry, can someone walk me trough the steps and what i need to do, to solve this please! Along with the anserw would help so much!
A mole of Chromebooks lined up end to end would encircle the moon approximately 1.59 x 10^16 times.
What is the length of a standard-size school Chromebook?The length of a standard-size school Chromebook is 11.6 inches.
To determine the number of times a mole of Chromebooks lined up end to end would encircle the moon, we need to first convert the length of one Chromebook into meters and then multiply that by Avogadro's number, which is the number of particles in a mole.
One Chromebook is 11.6 inches long, which is approximately 0.2946 meters. Avogadro's number is 6.022 x 10^23.
So, the total length of a mole of Chromebooks lined up end to end would be:
0.2946 meters * 6.022 x 10^23 = 1.75 x 10^24 meters
The circumference of the moon is approximately 10,917 kilometers, which is equal to 10,917,000 meters.
Learn more about a mole at: https://brainly.com/question/29367909
#SPJ1
The rays that damage the skin are call?
Answer:
ultraviolet, or UV rays from the sun can damage yor skin. thats why you put on sunscreen lol
calculate the mass percent (m/m) of a solution prepared by dissolving 56.27 g of nacl in 179.3 g of h2o .
The mass percent (m/m) of the solution prepared by dissolving 56.27 g of NaCl in 179.3 g of H2O is 23.85%.To calculate the mass percent (m/m) of a solution prepared by dissolving 56.27 g of NaCl in 179.3 g of H2O, we first need to calculate the total mass of the solution:
Total mass of solution = mass of solute + mass of solvent
Total mass of solution = 56.27 g NaCl + 179.3 g H2O
Total mass of solution = 235.57 g
Next, we can calculate the mass percent (m/m) of NaCl in the solution using the formula:
Mass percent (m/m) = (mass of solute / total mass of solution) x 100%
Mass percent (m/m) of NaCl = (56.27 g / 235.57 g) x 100%
Mass percent (m/m) of NaCl = 23.85%
Therefore, the mass percent (m/m) of the solution prepared by dissolving 56.27 g of NaCl in 179.3 g of H2O is 23.85%.
Find more about solution
brainly.com/question/14073757
#SPJ4
Please help
What volume, in liters, of 4.0 M LiBr solution can be made using 100.0 g LiBr?
(LiBr; 86.44 g/mol) [?] L
ANS = 0.288 L can be made.
How can we find the volume?The first thing that you need to do here is to convert the mass of lithium bromide to moles by using the compound's molar mass.
The number of moles of the solute—in your example, lithium bromide—present per 1.00 L of the solution is simply referred to as the molarity of the solution.
For every 1.00 L of this solution, 4.00 moles of lithium bromide must be present in order to create a 4.00-M solution.
You may calculate how many litres of this solution can be made using the molarity of the solution as a conversion factor because you already know that your sample contains 1.1515 moles of lithium bromide.
To know more about volume visit:
https://brainly.com/question/1578538
#SPJ1
suppose that aqueous solutions of barium nitrate and potassium carbonate are mixed. what is the name of the compound or compounds that precipitate? enter the name of the precipitate.
When aqueous solutions of barium nitrate and potassium carbonate are mixed, a precipitate of barium carbonate (BaCO3) will form.
A precipitate is a solid that forms and separates out of a solution when two or more soluble compounds are mixed together.
The balanced chemical equation for the reaction is:
Ba(NO3)2 (aq) + K2CO3 (aq) → BaCO3 (s) + 2 KNO3 (aq)
In this reaction, the barium cation (Ba2+) from barium nitrate (Ba(NO3)2) combines with the carbonate anion (CO32-) from potassium carbonate (K2CO3) to form the insoluble salt barium carbonate (BaCO3), which precipitates out of solution.
Note that the potassium cation (K+) and the nitrate anion (NO3-) remain in solution as soluble salts, potassium nitrate (KNO3).
To learn more about Precipitate :
https://brainly.com/question/20925010
#SPJ4
if the temperature of the hydrogen gas was underestimated, would this error cause the gas constant to be overestimated, underestimated, or remain unaffected? please explain your reasoning.
This error would cause the gas constant to be underestimated because the gas constant is a function of temperature and pressure.
If the temperature is underestimated, then the pressure calculated would be too high, resulting in an underestimation of the gas constant. The gas constant would remain unaffected because it does not depend on the temperature of the hydrogen gas. The gas constant is a physical constant which is the same for all gases regardless of their temperature or pressure. The gas constant is defined as the ratio of the universal gas constant (R) to the molar mass (M) of a particular gas. It is a measure of the ideal gas law and is equal to 8.3144598 joules per Kelvin per mole (J/K/mol). Therefore, an error in the temperature of the hydrogen gas would not affect the gas constant.
To learn more about hydrogen click here https://brainly.com/question/11837837
#SPJ4
A sample of 24 karat gold (pure gold), with a specific heat capacity of 0.130 J/g oC, was heated to 150.0oC and added to 50.00g of water in a calorimeter. The temperature in the calorimeter rose from 20.0oC to 45.0oC. What was the mass of the sample of gold that transferred its energy to the water?
The mass of the sample of gold that transferred its energy to the water is 22.7 g
What is Specific Heat Capacity ?
Specific heat capacity is the amount of heat required to raise the temperature of one unit of mass of a substance by one degree Celsius or Kelvin, without a change in phase. It is a physical property of the substance and is typically measured in units of J/(g·°C) or J/(g·K).
We can use the equation for heat transfer to solve this problem:
q = m * c * ΔT
where q is the heat transferred, m is the mass of the sample, c is the specific heat capacity, and ΔT is the change in temperature.
First, we need to calculate the heat transferred from the gold to the water:
q = m_gold * c_gold * ΔT_gold
where m_gold is the mass of the gold, c_gold is the specific heat capacity of gold, and ΔT_gold is the change in temperature of the gold.
ΔT_gold = 150.0oC - 20.0oC = 130.0oC
q = m_water * c_water * ΔT_water
where m_water is the mass of the water, c_water is the specific heat capacity of water, and ΔT_water is the change in temperature of the water.
ΔT_water = 45.0oC - 20.0oC
= 25.0oC
Now, we can set the two expressions for q equal to each other and solve for m_gold:
m_gold * c_gold * ΔT_gold = m_water * c_water * ΔT_water
m_gold = (m_water * c_water * ΔT_water) / (c_gold * ΔT_gold)
Substituting the given values:
m_gold = (50.00g * 4.184 J/g oC * 25.0oC) / (0.130 J/g oC * 130.0oC)
= 22.7 g
Therefore, the mass of the sample of gold that transferred its energy to the water is 22.7 g
Learn more about Specific Heat Capacity from given link
https://brainly.com/question/27991746
#SPJ1
How do you find the valence core and unpaired electrons?
To find the valence core and unpaired electrons of an atom or molecule, one must first identify the outer electrons of the atom or molecule.
This can be done by looking at the electron configuration of the atom or molecule. The valence core is the set of electrons in the outermost energy level, which is also referred to as the valence shell.
The number of unpaired electrons is equal to the number of electrons in the valence shell that is not part of a covalent bond.
To determine the number of unpaired electrons in a molecule, it is necessary to subtract the total number of electrons in covalent bonds from the total number of electrons in the valence shell.
Learn more about valence core and unpaired electrons:
https://brainly.com/question/29523563
#SPJ4
a 1.07 g sample of a monoprotic acid is dissolved in water and titrated with 0.210 m koh. what is the molar mass of the acid if 26.5 ml of the koh solution is required to neutralize the sample?
The molar mass of the monoprotic acid, given that 1.07 g of the acid was dissolved in water is 192.27 g/mol
How do I determine the molar mass of the monoprotic acid?We'll begin by obtaining the mole of KOH in the solution. Details below:
Molarity of KOH = 0.210 MVolume of KOH = 26.5 mL = 26.5 / 1000 = 0.0265 LMole of KOH =?Mole = Molarity x Volume
Mole of KOH = 0.210 × 0.0265
Mole of KOH = 0.005565 mole
Next, we shall determine the mole of the monoprotic acid. Details below:
Balanced equation:
HA + KOH —> KA + H₂O
From the balanced equation above,
1 mole of KOH reacted with 1 mole of HA.
Therefore,
0.005565 mole of KOH will also react with 0.005565 mole of HA.
Finally, we shall determine the molar mass of the monoprotic acid. Details below:
Mole of monoprotic acid = 0.005565 moleMass of diprotic acid = 1.07 gMolar mass of monoprotic acid =?Molar mass = mass / mole
Molar mass of monoprotic acid = 1.07 / 0.005565
Molar mass of monoprotic acid = 192.27 g/mol
Learn more about molar mass:
https://brainly.com/question/25645713
#SPJ1
If Kc = 0.042 for PCl3 (g) + Cl2 (g) ———-> PCl5 (g) at 500 K, what is the value of Kp for this reaction at this temperature?
Answer:
no answer
Explanation:
you can get the answer If you go back to your textbook
acid rain can damage your skin. group of answer choices true false only if you swim in an acidic lake
It is False that acid rain can damage your skin so the correct option among group of choices is (B) False.
Acid rain typically refers to rain with a pH below 5.6, which is more acidic than normal rain. While acid rain can damage certain materials, such as metals and buildings, it is unlikely to directly damage human skin. This is because the skin has a protective outer layer that helps to regulate the pH and prevent the penetration of harmful substances.
However, swimming in an acidic lake could potentially damage the skin, as the acid can disrupt the pH balance of the skin and cause irritation or burns. Additionally, exposure to acid rain can indirectly harm human health by damaging crops and forests, which can impact the food supply and air quality.
Learn more about Acid rain here:
https://brainly.com/question/11543614
#SPJ4
In the following redox reaction identify the element undergoing oxidation and the element undergoing reduction. 4NH3(g)+5O2(g)⟶4NO(g)+6H2O(g)
According to the question the element undergoing oxidation is nitrogen (N).
What is oxidation?Oxidation is a chemical reaction that involves the loss of electrons from an atom, molecule, or ion. This process creates an oxidized version of the original molecule or ion, which can often be identified by a change in color or smell. Oxidation reactions can occur in both organic and inorganic molecules. Examples of oxidation include the rusting of iron and the browning of an apple when exposed to air. Oxidation often results in the release of energy, which can be harnessed for various applications.
This is because it is gaining oxygen (O) atoms in the reaction. The element undergoing reduction is oxygen (O). This is because it is losing electrons (in the form of oxygen atoms) in the reaction.
To learn more about oxidation
https://brainly.com/question/21851295
#SPJ1
a concentration in terms of volume/volume is used to describe which types of solutions? responses solutions with a solid solute and a liquid solute solutions with a solid solute and a liquid solute solutions with a liquid solvent and a solid solute solutions with a liquid solvent and a solid solute solutions with a solid solvent and a solid solute solutions with a solid solvent and a solid solute solutions with a liquid solvent and a liquid solute
A concentration in terms of volume/volume is used to describe a solution with a liquid solvent and a liquid solute.
A homogeneous mixture composed of two or more substances is called a solution.
In a solution, there are two primary components, which are termed as,
Solute.Solvent.The minor component that is dissolved in a solution is known as the solute. The major component that dissolves the solute is known as the solvent.
For a solid substance, it is preferred to use the mass of the solid than the volume of the substance.
Whereas, in the case of liquids it is preferred to use the volume of the liquid than the mass of the liquid.
Hence, if both the solute and solvent of the solution are liquid then only a concentration in terms of volume/volume is used to describe the solution.
Learn more about the solution here: https://brainly.com/question/30198131
#SPJ4
if you wanted to produce 4.30 grams of iron (iii) hydroxide, how many ml of 1.00 m fe(no3)3 would you need if you had excess sodium hydroxide?
If we wanted to produce 4.30 grams of iron (III) hydroxide, the ml of 1.00 M Fe(NO₃)₃ excess sodium hydroxide is 0.040 L.
The mass of the iron (III) hydroxide = 4.30 grams
The mass molar of iron (III) hydroxide = 106.87 g/mol
The moles of the iron (III) hydroxide = mass /molar mass
The moles of the iron (III) hydroxide = 4.30 / 106.87
The moles of the iron (III) hydroxide = 0.040 mol
The molarity = 1 M
The volume = moles / molarity
Volume = 0.040 / 1
Volume = 0.040 L
Thus, the volume of Fe(NO₃)₃ is 0.040 L.
To learn more moles here
https://brainly.com/question/29076435
#SPJ4
In order to combat the cold here on campus, you may have seen OSU facilities use a brine solution to de-ice the roads and sidewalks. Brine, a concentrated salt solution, better prevents and eliminates ice from the roads, but can be more costly to store and disburse along the roadways. Why is brine a more effective de-ice solution than solid ice melt products? Select all that apply. a.Brine is NOT more effective than traditional ice melt products. b. Since brine is already a solution, the Van't Hoff Factor is higher than solid salt, making the freezing point depression greater. c. Brine is a higher concentration than solid salts, making the freezing point depression greater.d. Freezing point depression requires a solution to occur. Brine starts as a solution, where solid salt must form a solution first. e. The brine solution can more evenly coat the surface of the road, making the ice prevention more widespread.
The brine a more effective de-ice solution than solid ice melt products the correct option is b. Since brine is a already a solution, the Van't Hoff Factor is higher than the solid salt, making the freezing point depression greater.
The Salt brine for the roads is the solution of the salt that is generally the sodium chloride and the water, and it will help to keep the roads safe and use as less salt. The brine is a already a solution, the Van't Hoff Factor is higher than the solid salt, forms the freezing point depression greater.
The Freezing point depression will requires the solution to occur. The Brine to starts the solution, where the solid salt will form the solution first.
To learn more about brine here
https://brainly.com/question/1493673
#SPJ4
QuestionWhen hydrogen and oxygen combine to form water, they form:Aan unstable compoundBa stable mixtureCan unstable mixtureDan extremely stable compoundMedium
When hydrogen and oxygen combine to form water,they form d)stable compound.So,correct option is d.
At the point when hydrogen and oxygen combine to form water, they structure water an incredibly steady compound. We can say water is a steady compound on the grounds that huge energy is delivered is a sign that breaking water particles into the first components is extremely hard.
2H₂ + O₂=2H₂O
Water is an inorganic compound with the chemical equation H₂O It is a straightforward, bland, unscented, and almost drab synthetic substance, which is the fundamental constituent of Earth's hydrosphere and the liquids of all known living life forms (in which it goes about as a solvent).
It is essential for all known types of life, regardless of not giving food, energy or natural micronutrients. Its compound equation, H₂O, shows that every one of its particles contains one oxygen and two hydrogen molecules, associated by covalent bonds. The hydrogen particles are connected to the oxygen iota at a point of 104.45°. "Water" is additionally the name of the fluid province of H₂O at standard temperature and strain.
To know more about water,visit here:
https://brainly.com/question/19920929
#SPJ4
(Complete question) is:
When hydrogen and oxygen combine to form water, they form:
a)an unstable compound
b)a stable mixture
c)an unstable mixture
d)an extremely stable compound
Hydrogen peroxide solution is used as a bleach and to clean oil paintings.
A solution of hydrogen peroxide contains 10g of hydrogen peroxide in
every 100 cm of solution. What is the concentration of the solution in g/dm"?
Answer:
Explanation:
To convert the concentration of the solution from g/100 cm to g/dm^3, we need to first convert the volume unit from cm^3 to dm^3.
1 dm^3 = 10^3 cm^3
So, if 100 cm^3 of the solution contains 10 g of hydrogen peroxide, then 10^3 cm^3 (1 dm^3) of the solution contains 10 g * (10^3 / 100) = 10^3 g = 1000 g.
Therefore, the concentration of the solution in g/dm^3 is 1000 g/dm^3.
suppose that ch4(g) reacts completely with o2(g) to form co2(g) and h2o(g) with a total pressure of 1.2 torr. what is the partial pressure of h2o(g)? mcat
H2O has a partial pressure of 0.6 Torr.
To solve this problem, we need to use the balanced chemical equation for the reaction between CH4 and O2:
CH4(g) + 2O2(g) → CO2(g) + 2H2O(g)
According to the stoichiometry of this reaction, every mole of CH4 that reacts produces 2 moles of H2O. Therefore, the partial pressure of H2O can be calculated as follows:
Calculate the moles of CO2 produced: Since the reaction is complete, all the CH4 has reacted, and the pressure of CO2 is equal to the total pressure. The balanced equation tells us that 1 mole of CH4 produces 1 mole of CO2, so the moles of CO2 are equal to the moles of CH4 that reacted.
Calculate the moles of H2O produced: Since the balanced equation tells us that 1 mole of CH4 produces 2 moles of H2O, the number of moles of H2O produced is twice the number of moles of CH4 that reacted.
Calculate the partial pressure of H2O: The partial pressure of H2O is proportional to the number of moles of H2O produced. Therefore, we can use the ideal gas law to calculate the partial pressure of H2O:
PV = n Rt
where P is the partial pressure of H2O, V is the total volume of the gases, n is the number of moles of H2O, R is the ideal gas constant, and T is the temperature. Since we know the total pressure (1.2 Torr), we can use this to calculate the partial pressure of H2O as follows:
P(H2O) = n(H2O)RT / V = (2n(CH4)RT / V) = 2P(CO2)
where P(CO2) is the total pressure of CO2, which we found to be equal to the total pressure of the mixture.
=0.6 Torr(half of total pressure).
For more such questions on partial pressure
https://brainly.com/question/19813237
#SPJ4
The equation for the reaction of magnesium ribbon and hydrochloric acid is:
Mg(s) + 2HCl(ag) + MgCl2(ag) + H2
If 1.53 g magnesium reacted, how many moles of hydrogen gas was produced?
Mg(s) + 2HCl(ag) + MgCl2(ag) + H2
If 1.53 g magnesium reacted,0.064 g of hydrogen gas is produced.
From the balanced chemical equation, 1 mole of magnesium reacts with 2 moles of hydrochloric acid to produce 1 mole of hydrogen gas.
The molar mass of magnesium is 24.31 g/mol. Therefore, the number of moles of magnesium in 1.53 g of magnesium is:
1.53 g / 24.31 g/mol = 0.063 moles
According to the balanced chemical equation, 1 mole of magnesium produces 1 mole of hydrogen gas. Therefore, 0.063 moles of magnesium produce 0.063 moles of hydrogen gas.
The molar mass of hydrogen is 1.008 g/mol. Therefore, the mass of 0.063 moles of hydrogen gas is:
0.063 moles x 1.008 g/mol = 0.064 g
So, 0.064 g of hydrogen gas is produced.
Learn more about molar mass here:
https://brainly.com/question/12127540
#SPJ4
