Find the oxidation number

please help ​

The number of molecules of carbon molecules of oxygen that would be required is 9.03 × 10²³ molecules.

The number of molecules of a substance can be calculated by multiplying the number of moles by Avogadro's number as follows:

no of molecules = no of moles × 6.02 × 10²³

According to this question, if 18 grams of carbon react with oxygen to produce carbon dioxide. The number of moles of carbon can be calculated as follows:

no of moles of carbon = 18g ÷ 12g/mol = 1.5 moles

no of molecules = 1.5 moles × 6.02 × 10²³

no of molecules = 9.03 × 10²³ molecules

Learn more about no of molecules at: https://brainly.com/question/28319191

#SPJ1

The set of quantum numbers that does not specify an orbital in the hydrogen atom is n = 3; l = 3; m = -2.

The first or principle quantum number (n) represents the major energy level the electron is in. The second azimuthal quantum number (?) represents the type of sublevel the electron is in. The third quantum number, called the magnetic quantum number, described the spatial orientation of the orbital in the sublevel, The fourth quantum number, called the spin quantum number, described whether the electron was the first (+1/2) or second (-1/2) to enter the orbital.

Values for all quantum numbers derive from the principle quantum number.

n = energy level number (1,2,3,4,etc)

? = sublevel type, values are( 0, n-1)...3rd energy level has 0(s), 1(p), and 2(d) type sublevels

m = orbital, values are -?..0..+?...a 3d sublevel has (-2, -1, 0, +1, +2) type orbitals

s = +1/2 for first to enter orbital. -1/2 for second to enter orbital.

Since, range of  L=(0,n-1),

and given n=3, L must be in (0,2).

Learn more about quantum numbers from the link given below.

https://brainly.com/question/16979660

#SPJ4

Answer:

2 different ways, color and acid

Explanation:

Copper and zinc powder can be separated based on the colours; copper metal is red and zinc is grey in colour. The other method is to dissolve zinc powder in an acid,then filter copper from zinc chloride, while copper don't react with the acid because it is low in the reactivity series than hydrogen.

The molarity of the 10.0% (by mass) aqueous solution of HCl is  [tex]3.04M[/tex]

The molarity of a 10.0% (by mass) aqueous solution of hydrochloric acid (HCl) can be calculated using the following equation:

Molarity =[tex]\frac{(mass of solute (g)) }{(molar mass of solute (g/mol) * volume of solution (L))}[/tex]

Given that the density of the solution is 1 g/mL, we can calculate the volume of the solution as follows:

Volume of solution (L) =[tex]\frac{Mass of solution (g) }{Density of solution (g/mL)}[/tex]

For a 10.0% (by mass) aqueous solution of hydrochloric acid (HCl), the molar mass of the solute is 36.46 g/mol.

Therefore, the molarity of the 10.0% (by mass) aqueous solution of HCl can be calculated as follows:

Molarity =[tex]\frac{(10 g) }{(36.46 g/mol * 0.01 L)}[/tex]

Molarity = [tex]3.04 M[/tex]

learn more about molarity refer:brainly.com/question/8732513

#SPJ4

complete question:Calculate The Molarity Of A 10.0% (By Mass) Aqueous Solution Of Hydrochloric Acid (HCI). (Density Of Solution Is 1g/ML) : a.3.04 m b.2.74 m c.0.274 m d.4.33 m

Is mechanism no. 1 NO+Cl₂→ NOCI₂, NOCI₂+NO→2NOCI  consistent with the outcomes of exercise number 31. Rate = K[NO]² [C1₂] is the process that decides the rate.

The intricate procedures by which chemical substances are changed into other substances are known as reaction mechanism in chemical reactions. The actual reactions themselves might entail interactions between atoms, molecules, ions, electrons, and free radicals and could happen in solids, gases, liquids, or at the boundaries between any of these.

Examining the intricate workings of reaction mechanisms is crucial since it aids in understanding and managing chemical reactions, among other things. It is possible for many reactions of significant commercial importance to proceed along more than one reaction path. By understanding the underlying reaction mechanisms, it may be possible to select conditions that favor one reaction path over another, resulting in maximum amounts of desired products and minimal amounts of unwanted products. Additionally, based on how people respond.

Learn more about mechanism here:

https://brainly.com/question/14529649

#SPJ4

The complete question is:

The reaction between NO and Cl₂ takes place in the following two steps:

I. NO+Cl₂→ NOCI₂

II. NOCI₂+NO→2NOCI

2NO+Cl₂→2NOClThe rate law of overall reaction, 2NO+Cl₂→2NOCl ,can be given by:

A. Rate = K[NO]² [C1₂]

B. Rate = K[NO][CI₂]

C. Rate = K[NOC1][NO]

D. Rate = K[NO][CI₂]²

The highest heat of vaporization is in the case of a) H2O that is explained below.

The heat of vaporization is described as the quantity of heat wanted to show 1 g of a liquid  into a vapor, with out a upward thrust withinside the temperature of the liquid. The Heat of Vaporization (additionally referred to as the Enthalpy of Vaporization) is the warmth required to result in this segment change. Heat imparts strength into the gadget to conquer the intermolecular interactions that maintain the liquid collectively to generate vapor. The heat of vaporization of water is  2,260 kJ/kg, that's same to 40.8 kJ/mol. The vaporization is the other system of condensation. The warmness of condensation is described as the warmth launched whilst one mole of the substance condenses at its boiling factor below preferred pressure.

Thus, a is the correct option.

To learn more about heat of vaporization check the link below:

https://brainly.com/question/26306578

#SPJ4

The enthalpy of vaporization (ΔHvap) of water at 373 K is given as 40.7 kJ/mol. To calculate the heat (q) involved in the vaporization of 8.29 g of water, we need to know the number of moles of water present in this mass.

The molar mass of water is 18.015 g/mol, so the number of moles of water in 8.29 g can be calculated as follows:

n = m / M = 8.29 g / 18.015 g/mol = 0.460 mol

Next, we can calculate the heat (q) involved in the vaporization of 0.460 mol of water using the equation q = n ΔHvap:

q = n ΔHvap = 0.460 mol × 40.7 kJ/mol = 18.7 kJ

So, the heat involved in the vaporization of 8.29 g of water at 373 K is 18.7 kJ.

The correct answer is that the Ka of unkonwn weak acid Ha, at 25°c, if the pH of a 2.5x10^-2m solution of the acid was measured and found to be 4.94 is 52.9x10^-10

The acid dissociation constant determines the difference between strong and weak acids (Ka). The acid dissociates more as Ka increases. Strong acids must thus dissociate more in water. A weak acid, on the other hand, is less likely to ionise and release a hydrogen ion, which results in a less acidic solution.Salt and acid are in a 1/5 to 4/5 ratio. In today's experiment, you will first determine Ka of an unidentified acid by measuring the pH of the pure acid (no salt present). Titrating the acid is the next step to figure out how much base is needed to totally neutralize it. For each answer, you will calculate Ka.

To learn more about Ka click on the ink below

brainly.com/question/29653757

#SPJ4

56.7 grams of aluminum oxide (Al2O3) are produced from 6. 000 moles of aluminum (Al ).

To solve this problem, we need to use the balanced chemical equation for the reaction between aluminum and oxygen to form aluminum oxide:

4 Al + 3 O2 → 2 Al2O3 From this equation, we can see that for every 4 moles of aluminum that react, 2 moles of aluminum oxide are produced. Therefore, we can use the following stoichiometric calculation to find the mass of aluminum oxide produced: 6.000 moles Al * (2 moles Al2O3 / 4 moles Al) * (101.96 g Al2O3 / 1 mole Al2O3) = 305.84 g Al2O3 So, 6.000 moles of aluminum will produce 305.84 grams of aluminum oxide.

To learn more about aluminium oxide please visit - https://brainly.com/question/25869623
#SPJ4

Air pollution worsens in winter as cold and dry air contains more pollutants. This makes it easy for pollutant air near the surface of the earth to rise and be lifted away.

As a result of the presence of compounds in the atmosphere that are hazardous to human health and the health of other living things, or that impair the climate or materials, air pollution is the contamination of the air.

It is known that cold air usually sinks and warm air usually rises. Most of the time, temperature decreases with elevation. This makes it easy for pollutant air near the surface of the earth to rise and be lifted away.

However, during winter, thermal inversions are more likely to happen. Because sunlight is weaker during this season, air near the earth’s surface may end up being cooler than the air above, causing the pollution-filled air near to earth's surface. Hence, Colder air traps more pollution.

It is also true that rain can wash away pollutants. But in the dry winter season, due to less humidity in the air, the chances of rainfall are generally lower. Hence, dry air contains more pollutants. Therefore, air pollution is worse in winter.

Learn more about air pollution here: https://brainly.com/question/15158482

#SPJ4

Your eye level should be parallel to the level of the meniscus when measuring liquids in a graduated cylinder.

While measuring liquids in a graduated cylinder, it is critical to keep your eye level in the line up with the level of the meniscus. The meniscus is the bent surface of the fluid that structures at the highest point of the fluid in the graduated chamber.

This bent surface can make the fluid level seem higher or lower than it really is, contingent upon the place where it is seen. By keeping your eye level line up with the meniscus, you can kill any parallax mistake and get a more precise estimation. To peruse the volume of the fluid precisely, you ought to ensure the lower part of the meniscus is at the graduation line on the chamber.

Learn more about meniscus:

https://brainly.com/question/30335396

#SPJ4

As 1. 6g of the compound was found to contain 0. 64g of oxygen. The empirical formula is CO11.

To calculate the empirical formula of a compound, we need to determine the relative amounts of each element present in the compound.

Here, we are given the mass of oxygen in the compound as 0.64 g. We can use this information to find the mass of the other element(s) in the compound as follows:

Mass of other element (s) = Total mass of compound - Mass of oxygen

Mass of other element(s) = 6 g - 0.64 g = 5.36 g

Now, we need to convert the mass of each element to the number of moles of that element using its molar mass. The molar mass of oxygen is 16 g/mol. To find the molar mass of the other element, we need to know its identity.

Let's assume for the purpose of this calculation that the other element is carbon. The molar mass of carbon is 12 g/mol. Using this information, we can calculate the number of moles of each element as follows:

Moles of oxygen = Mass of oxygen / Molar mass of oxygen = 0.64 g / 16 g/mol = 0.04 mol

Moles of carbon = Mass of carbon / Molar mass of carbon = 5.36 g / 12 g/mol = 0.45 mol

Now, we need to find the simplest whole-number ratio between the number of moles of each element. To do this, we divide both moles by the smallest number of moles (in this case, 0.04):

Moles of oxygen / 0.04 = 1

Moles of carbon / 0.04 = 11.25

Rounding these numbers to the nearest whole number gives us a ratio of 1:11, which means the empirical formula is CO11.

To know more about empirical formulas, visit:https://brainly.com/question/1363167

#SPJ4

The air within the tyre is 245 K degrees.

Gauge is (100) x (mils), therefore 0.3 mils, for instance, is 30 gauge. You multiply mils by 25.4 to convert from mils to microns. Solve For measuring plastic film, technology creates thickness gauging technology.

The ideal gas law that must be solved to determine the air temperature inside the tyre

PV = nRT where P is the gauge pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature.

Assuming standard atmospheric pressure of 101.3 kPa, the absolute pressure is:

P = 205 kPa + 101.3 kPa = 306.3 kPa

We can now enter the values into the ideal gas law as follows:

PV = nRT

Rearranging to solve for T, we get:

T = PV / nR

Substituting the values and using the gas constant R = 8.31 J/(mol K), we get:

T = (306.3 kPa)(0.0120 m^3) / (1.50 mol)(8.31 J/(mol K))

T = 245 K

To know more about gauge pressure visit:-

https://brainly.com/question/28504340

#SPJ1

To prepare 100 mL of a 0.200 M acetate buffer, pH 5.00, you will need acetic acid, 3M HCl, 3 M NaOH, and a pH meter.

1. Calculate the amounts of acetic acid and sodium acetate needed to make the buffer.

To prepare 0.200 M acetate buffer, you will need 0.2 moles of acetic acid and 0.2 moles of sodium acetate.

Moles of acetic acid = 0.2 moles

Moles of sodium acetate = 0.2 moles

2. Calculate the volume of acetic acid and sodium acetate needed to make the buffer.

Volume of acetic acid = [tex]0.2 moles *(17.30 mL/mole) = 3.46 mL[/tex]

Volume of sodium acetate =[tex]0.2 moles * (22.06 mL/mole) = 4.41 mL[/tex]

3. Calculate the amount of HCl and NaOH needed to adjust the pH to 5.00.

First, the pKa of acetic acid needs to be calculated.

pKa of acetic acid = 4.76

Now, the amount of HCl and NaOH needed to adjust the pH of the buffer can be calculated using the Henderson-Hasselbalch equation.

Henderson-Hasselbalch equation:

pH =[tex]pKa + log\frac{[base]}{[acid]}[/tex]

Rearranging the equation to calculate [base],

[base] =[tex][acid] * 10^{(pH - pKa) }[/tex]

[NaOH] =[tex][HCl] * 10^{(pH - pKa) }[/tex]

[HCl] =[tex][NaOH] * 10^{(pKa - pH) }[/tex]

[HCl] =[tex]0.2 M * 10^{(4.76 - 5.00) }[/tex]

[HCl] = [tex]0.162 M[/tex]

[NaOH] =[tex]0.2 M* 10^{(5.00 - 4.76) }[/tex]

[NaOH] = [tex]0.238 M[/tex]

4. Calculate the volume of HCl and NaOH needed to adjust the pH to 5.00.

Volume of HCl = [tex]0.162 M * (17.30 mL/mole) = 2.79 mL[/tex]

Volume of NaOH = [tex]0.238 M *(22.06 mL/mole) = 5.25 mL[/tex]

5. Prepare the buffer.

To prepare the buffer, add 3.46 mL of acetic acid, 4.41 mL of sodium acetate, 2.79 mL of HCl, and 5.25 mL of NaOH to a volumetric flask, and make up to 100 mL with distilled water.

6. Measure the pH of the buffer and adjust as necessary.

Using a pH meter, measure the pH of the buffer and adjust with additional HCl or NaOH as necessary to reach a pH of 5.00.

Once the desired pH is reached, the buffer is ready to use.

learn more about acetate buffer Refer:brainly.com/question/16970860

#SPJ4

complete question:How do you prepare 100 mL of 0.200 M acetate buffer, pH 5.00, starting with pure liquid acetic acid and solutions containing 3 M HCl and 3 M NaOH furthermore 15 points?

Answer:

a graduated cylinder

Explanation:

the graduated cylinder is the lab tool used to measure the volume of any liquid <3

Drs. Avery, MacLeod, and McCarty used the enzyme protease to remove the proteins from the cell extracts." Therefore, the correct answer is the first option.

Proteases are enzymes that break down proteins into smaller peptides or amino acids. This is important for the digestion of food and the regulation of many cellular processes. Drs. Avery, MacLeod, and McCarty used protease to remove the proteins from the cell extracts in order to isolate and study the DNA in their experiments. This was a crucial step in their research, which helped to establish that DNA is the genetic material of the cell.

Learn more about protease enzyme at https://brainly.com/question/28823660

#SPJ11

As a substance undergoes a change from the solid to the liquid phase at constant temperature, the average kinetic energy of its molecules increases.

The relationship between a molecule's average kinetic energy and absolute temperature is as follows: K = 1 2 m v 2 and K = 3 2 k B T. The average kinetic energy of a substance's particles is directly inversely correlated with its temperature. As the temperature rises, the particles must move more quickly because their mass is constant. The heat that is applied when a substance is heated to a constant temperature (i.e., during the phase change state) causes the vibrating molecules to gain potential energy to dissipate the intermolecular force of attraction and move around freely. The potential energy therefore rises as a result.

Learn more about kinetic energy here:

https://brainly.com/question/26472013

#SPJ4

The heat of solution is made up of two measurable heats, the heat of hydration and the heat of lattice energy.

The heat of hydration is the amount of heat released when one mole of a substance is dissolved in water, and the heat of lattice energy is the amount of heat released when one mole of a solid ionic compound is formed from its gaseous ions.

Together, these two heats make up the heat of solution, which is the overall amount of heat released or absorbed during the dissolution of a substance in a solvent.

Learn more about dissolution in:

https://brainly.com/question/29828854

#SPJ11

Differences in elevation above sea level can have a significant impact on the average annual temperature in a given location.

The question is incomplete hence I will approach it generally.

Differences in elevation above sea level can have a significant impact on the average annual temperature in a given location. This is because temperature decreases with increasing altitude due to several factors, including changes in air pressure, moisture content, and the amount of solar radiation received.

At higher elevations, air pressure decreases, which causes the air to expand and cool. Additionally, the moisture content of the air decreases with altitude, which reduces the amount of heat absorbed by the air. Finally, at higher elevations, the atmosphere is thinner, and less of the sun's energy is absorbed, leading to lower temperatures.

Learn more about sea level:https://brainly.com/question/28229060

#SPJ1

The balanced equation for the reaction of zinc with hydrochloric acid is:

Zn (s) + 2 HCl (aq) -> ZnCl2 (aq) + H2 (g)

A balanced equation is a chemical equation in which the number of atoms of each element is equal on both sides of the equation. This means that the equation is in agreement with the law of conservation of matter, which states that matter cannot be created or destroyed, only transformed from one form to another.

Balancing an equation involves adjusting the coefficients in front of the chemical formulas so that the number of atoms of each element is the same on both sides of the equation.

Zn (s) + 2 HCl (aq) -> ZnCl2 (aq) + H2 (g)

In this reaction, zinc (Zn) reacts with hydrochloric acid (HCl) to form zinc chloride (ZnCl2) and hydrogen gas (H2).

To learn more about Balanced equation:

https://brainly.com/question/4328202

#SPJ4

Phosphorous halides and alcohol react to form alkyl halides, as well as the byproducts phosphoryl chloride (POCl3) and HCl.

The best methods for converting alcohols into alkyl halides are phosphorous halides and thionyl chloride.

As a chlorinating agent, it is employed. It serves as an intermediary in the production of phosphoric acid derivatives, chloro-anhydrides, and phosphorus acid. It serves as an intermediary in the production of organophosphorus insecticides, water purification systems, lubricant additives, and other products.

A fuming, oily liquid with a pungent stench, phosphorus oxychloride can range in hue from white to pale yellow. In addition to being employed as a chlorinating agent, it is also used in the production of semiconductors, plasticizers, hydraulic fluids, and pesticide-like organophosphorus compounds.

For such more question on Phosphorous

https://brainly.com/question/1594180

#SPJ4

Note: The correct question would be as bellow,

What are the products of following reaction?

[tex]CH_3CH_2 -OH+PC1_5- >[/tex]

The concept of energy refers to the ability of a system to do work, which is the product of force and distance.

The Law of Conservation of Energy is a fundamental principle in physics that states that the total amount of energy in a closed system remains constant over time. This law is based on the idea that energy cannot be created or destroyed, but can only be transformed from one form to another.
There are many forms of energy, including kinetic energy, potential energy, thermal energy, electromagnetic energy, and chemical energy.
The Law of Conservation of Energy is a consequence of the First Law of Thermodynamics, which is the principle of energy conservation in thermodynamic systems. The First Law states that the total amount of energy in a system is always conserved, even as it undergoes changes in form.
For example, when a ball is thrown into the air, it possesses kinetic energy due to its motion, but as it rises higher, this energy is gradually transformed into potential energy due to its position relative to the Earth. When the ball falls back down, the potential energy is transformed back into kinetic energy, and the total amount of energy in the system remains constant.

The Law of Conservation of Energy has many important applications in the study of physics, including in the design of machines and the analysis of chemical reactions.

Learn more about the Law of Conservation of Energy here:

https://brainly.com/question/29775341

#SPJ4

The overall cost of creating 65 tonnes of David's suggested mix, which contains 43% NaCl, 33% KCl, and 24% CaCl2, is $2,795 plus $3,217.5 plus $3,120, which comes to $9,132.5.

We need to know the price of each salt per tonne in order to determine the cost of creating 65 tonnes of David's suggested salt mixture, which contains 43% NaCl, 33% KCl, and 24% CaCl2. Assume that the price of NaCl, KCl, and CaCl2 are each $100 per tonne, $150 for KCl, and $200 for CaCl2.

We can now determine the blend's overall cost. It will cost $2,795 for 27.95 tonnes of NaCl at a price of $100 per tonne. It will cost 21.45 tonnes of KCl at a price of $150 per tonne, or $3,217.5. It will cost $15.6 tonnes x $200 per tonne ($3,120) for CaCl2.

David's suggested mix may be produced for 65 tonnes at a total cost of $2,795 + $3,217.5 + $3,120 = $9,132.5.

learn more about KCl here:

https://brainly.com/question/4836100

#SPJ4

The ground state configuration of calcium (Ca) is 1s2 2s2 2p6 3s2 3p6 4s2. The ground state configuration is the lowest energy state that an atom or molecule can occupy.

It is the electron configuration of an atom or molecule in its most stable form, corresponding to the minimum energy state. The least energetic and most stable configuration is the ground state configuration. An excited state configuration is a higher energy configuration (it requires energy input to create an excited state). The electrons used for bonding are called valence electrons. The primary quantum number (n), the orbital (s, p, d, or f), and the total number of electrons are used to represent electron configurations. The total number of electrons is expressed as a superscript.

To learn more about electron configuration click here https://brainly.com/question/29757010

#SPJ4

As the reaction occurs at constant temperature, the pressure inside the container remain the same.

Pressure is defined as the force was applied perpendicular to an object's surface per unit area across which that force is dispersed. 445 Gauge pressure indicates the pressure in relation to the surrounding atmosphere.

Pressure is expressed using a variety of units. Some of these stem from a unit of forces exerted by an area unit. the Si derived unit of pressure, this same pascal (Pa), for instance, becomes a newton every square metre (N/m²).

P×V = n×R×T

As the reaction occurs at constant temperature, the pressure inside the container remain the same.

Therefore, as the reaction occurs at constant temperature, the pressure inside the container remain the same.

To know more about pressure, here:

https://brainly.com/question/29341536

#SPJ1

The chemical name for ozone is O3, and it is a unique type of oxygen. We breathe O2, and O2 is essential to life on Earth.

For more information on ozone kindly visit to

https://brainly.com/question/27911475

#SPJ1

Covalent bonding can result in de-localized electrons, such as in metallic bonding where atoms share valence electrons, or in conjugated systems in organic molecules.

Valence electrons are the outermost electrons in an atom and are responsible for the chemical properties of the element. They are located in the highest energy level or valence shell of an atom and determine how that atom interacts with other atoms. For example, atoms with a full valence shell, such as the noble gases, are generally unreactive, whereas atoms with incomplete valence shells, such as the halogens, are highly reactive and tend to form chemical bonds with other atoms to achieve a full valence shell. Valence electrons can be shared or transferred between atoms, which leads to the formation of chemical bonds, including ionic bonds, covalent bonds, and metallic bonds. Understanding the properties and behavior of valence electrons is essential for predicting and explaining the chemical properties of different elements and compounds.

Learn more about valence electrons here:

https://brainly.com/question/28977387

# SPJ4

1. The Earth revolves around the Sun. Theory: This is a scientific theory, which is an explanation supported by a large body of evidence that explains how a natural phenomenon or phenomenon works.

A theory is an explanation or principle that is based on observations, experiments, and logical reasoning. It is an organized system of ideas, concepts, and principles intended to explain how something works or why something happens. Theories are used to explain and predict phenomena and can be used to develop hypotheses, which can then be tested to gain a better understanding of the natural or social world. Theories can be used to understand and explain a wide variety of phenomena in the natural and social sciences, including the behavior of particles, the functioning of the human body, and the social dynamics of large groups of people.

To learn more about theory
https://brainly.com/question/16805203
#SPJ1

The fossils can tell us about the age of species and the ones that mayt now be extinct.

Your question is incomplete but let us look at the role of fossils in the study of species.

Fossils can provide evidence about species that have gone extinct. Fossils are the remains or impressions of ancient plants or animals that have been preserved in rock or other geological materials. By studying fossils, scientists can learn about the species that lived in the past, their anatomy, and their behavior.

If a species has not been found as a fossil for a certain period of time, and no living individuals of that species have been found, it is considered to be extinct. This information can be used to infer the extinction of species over time.

Learn more about fossils:https://brainly.com/question/14988327

#SPJ1

The mole fraction of methanol is 0.100 in a 78.0-g 78.0-g aqueous solution of methanol, ch4o, ch 4 o. Is  the mass of methanol in the solution is 7.809 g and the mass of water is 39.425 g.

The mole fraction of methanol (CH4O) in the solution is 0.100, which means that 10% of the moles of the solution are methanol. We can use this information, along with the total mass of the solution, to determine the mass of each component.

The total moles of the solution can be calculated by dividing the total mass of the solution by its molar mass. Methanol has a molar mass of 32.04 g/mol, so we have:

total moles of solution = 78.0 g / 32.04 g/mol = 2.434 mol

Now we can calculate the moles of methanol:

moles of methanol = 0.100 x 2.434 mol = 0.2434 mol

The remaining moles are water:

moles of water = 2.434 mol - 0.2434 mol = 2.1906 mol

To calculate the mass of each component, we can use their respective molar masses:

mass of methanol = 0.2434 mol x 32.04 g/mol = 7.809 g

mass of water = 2.1906 mol x 18.02 g/mol = 39.425 g

Therefore, the mass of methanol in the solution is 7.809 g and the mass of water is 39.425 g.

Learn more about molar mass here:

https://brainly.com/question/12127540

#SPJ4