Energy is released into the cells by __________. A) Golgi bodies B) mitochondria C) vesicles D) lysosomes

Answers

Answer 1

Answer:

B) mitochondria

Explanation:


Related Questions

Compare and contrast Dalton's atomic theory with modern atomic theory.​

Answers

Answer:

Postulates of Dalton's Atomic Theory:

1) Atoms can neither be created nor destroyed.

2) During chemical reaction, atoms combine or separate or re-arrange. They combine in simple ratios.

3) All elements are composed of the indivisible particles called atoms.

4) Atoms of a particular element are identical. They have the same mass and volume.

Postulates of modern atomic theory:

1) All matter is composed of atoms.

2) Atoms consist of protons, electrons and neutrons.

3) Atoms of an element may differ in masses. (as in isotopes)

4) The ratio in which elements combine may not be simple.

Similarities:

1) All elements/matter are/is composed of atoms.

2) Atoms can neither be created nor destroyed.

3) During chemical reactions, atom combine or separate or rearrange.

Differences:

1) Dalton's theory said that atoms are indivisible particles but modern theory denies it and calls atom a divisible particle consisting of sub-atomic particles, protons, electrons and neutrons.

2) Dalton's theory said that atoms of the same element have same mass and volume but according to modern theory, it is said that atoms of the same element can differ in mass (as in isotopes).

3) Dalton said that atoms combine in simple ratio but modern theory denies it.

[tex]\rule[225]{225}{2}[/tex]

Hope this helped!

~AH1807


How did gravity and density affect the order in which these spheres ended up on earth​

Answers

Answer:

The atmosphere and Earth's interior are layered by density. The differentiation between these layers is due to processes that took place during the early stages of Earth's formation (ca. 4.5 billion years ago). At this time, melting would have caused denser substances to sink toward the center while less-dense materials would have migrated to the crust.

Gravity pulls more strongly on denser materials so denser materials are at the center of things.

Explanation:

Gravity pulls more strongly on denser materials so denser materials are at the center of things. The lowest layer of the atmosphere is denser than the upper layer. Earth's liquid metal core has convection, which generates the magnetic field.

Denser materials are in the centre of the universe because they are more powerfully pulled toward the centre by gravity.

What is gravity?

The force that pulls items toward the centre of a planet or other entity is called gravity. All of the planets are kept in orbit around the sun by gravity.

Gravity applies to anything that has mass. Gravity is stronger for objects with higher mass. Along with distance, gravity weakens as well. Therefore, the gravitational force of two things becomes stronger the closer they are to one another.

The mass of the Earth is what creates gravity. The total gravitational force of all of its mass acts on the weight in your body. What gives you weight is that. Additionally, you would weigh less than you do now if you were on a planet with a lower mass than Earth.

Gravity applies to anything that has mass. Gravity is stronger for objects with higher mass. Along with distance, gravity weakens as well. Therefore, the gravitational force of two things becomes stronger the closer they are to one another.

Therefore, denser materials are closer to the centre of the universe because gravity is more drawn to them.

Read more about gravity, here

https://brainly.com/question/4014727

#SPJ2

How many significant figures in 100000 g?

Answers

Answer:

1

Explanation:

Any digit that is not 0 is always significant

List some things that help with heat generation. What do you use everyday that helps with heat generation?

Answers

Answer: A toaster

Explanation: A toaster is an house held item that is used for heating and toasting bread and other stuff.

Could someone help me

Answers

Answer:

The space in the container so how small it is the more pressure is going to build up. YOUR WELCOME AND HAVR A GOOD DAY.

Please help me..
Will give the brainliest
Urgent
Please answer correctly

Answers

Explanation:

a) blue litmus paper turns red when u add acid in it .

b) red litmus paper , when an alkali dissolves in water it produce hydroxide ions

which cause it to become a alkaline

Someone pls help me I will make you brain

Answers

Answer:

transmission clutches

Think of a time you might have used the scientific method without even realizing it.

Answers

Answer:

when i exist

Explanation:

the elements in the far upper right corner are classified as

Answers

They are known as NONMETALS

Convert 4.36 x 10 square 25 molecules of CH3OH to moles.

Answers

Answer:

72.43 moles

Explanation:

To find the number of moles in a substance given it's number of entities we use the formula

[tex]n = \frac{N}{L} \\[/tex]

where n is the number of moles

N is the number of entities

L is the Avogadro's constant which is

6.02 × 10²³ entities

From the question we have

[tex]n = \frac{4.36 \times {10}^{25} }{6.02 \times {10}^{23} } \\ = 72.425249[/tex]

We have the final answer as

72.43 moles

Hope this helps you

What is empirical evidence
A retest of experimental results to make them reliable

Knowledge gained by observation or measurement

A prediction of test results before an experiment

A conclusion derived from evidence and logical reasoning

Answers

The correct answer is b

how many neutrons does the isotope of hydrogen called deuterium have

Answers

Answer:

The deuterium has one neutron and one proton (mass number equals 2) whereas, the far more common hydrogen isotope, protium, has no neutons in the middle.

Explanation

what differentiates weathering From erosion
a. sediments
b. deposition
c. water
d. movement​

Answers

Answer:

b

Explanation:

deposition is the differentiates weathering from erosion

What is the most common ion charge of chromium? Where on the periodic table?​

Answers

Answer:

i

Explanation:

The most common oxidation states of chromium are +6, +3, and +2. On the metal area of the periodic table.

Explanation:

what is the maximum wavelength of photon that will eject a ground state electron from a hydrogen atom?

Answers

Answer:

9.13 x 10^-8 m

Explanation:

The maximum wavelength of photon that will eject a ground state electron from a hydrogen atom is 9.18 * 10^-8.

What is wavelength?

Wavelength is defined as the distance between identical points in the adjacent cycle of a waveform signal propagated in space or along the wires.

Wavelength is calculated as wave speed and frequency.

Wavelength = speed/frequency

SI unit of wavelength is meter.

A ground state atom is an atom in which total energy of the electron can not be lowered by transferring one or more electrons to different orbitals.

Thus, the maximum wavelength of photon that will eject a ground state electron from a hydrogen atom is 9.18 * 10^-8.

To learn more about  wavelength, refer to the link below:

https://brainly.com/question/12924624

#SPJ2

Please tell me the answer of this question, first person to answer will be marked brainlist

Answers

It’s the elephant because it’s bigger in size and it covers more surface area. The mouse is smaller in size. The elephant would be the answer

*20 points* Pls answer questions in a positive way NO LINKS NO FILES Thank you

Answers

Answer:

A compound is a substance made of two or more different atoms which are chemically combined(Option B)A mixture is made of two or more substances that are not chemically combined (OptionB)

Explanation:

Example of compound(CO)

Example of mixture(Milk)

why does the reaction of anthracene with maleic anhydride needs to be kept away from water?

Answers

Answer:

Water separates the two reactants into two layers, stopping the reaction.

Explanation:

Maleic anhydride can and will react with water.

The reaction between maleic anhydride and anthracene is a Diels Alder reaction. This type of reaction is a cycloaddition reaction.

What is Diels Alder reaction?

The Diels Alder reaction is a member of a class of reactions called cycloadditions. This reaction involves three pi bonds, two from the diene and one from the dienophile in a concerted reaction to give a six-membered ring.

Since this reaction involves four pi electrons in the diene and two pi electrons from the dienophile, it is sometimes referred to as a 4+2 cycloaddition.

The presence of electron donating groups on the diene and the electron withdrawing groups on the dienophile favors normal Diels Alder reactions. The reaction involves the formation of new σ bonds which are energetically more stable than π bonds.

Anthracene can react with water, breaking the center ring. Maleic anhydride can react with water, opening its ring. The reactants get seperated into two layers by water and thereby stops the reaction.

To know more about Diels Alder reaction, visit;

https://brainly.com/question/29972519

#SPJ6

How would you change liquid water into ice? Be sure to explain what is happening to the energy (the heat)

Answers

Answer:

By putting the liquid water in the fridge

Explanation:

When it is solid the heat will melt to liquid water and if you put it inside a boiling kettle if it boil finished it will bring out gas,if you open it the cover of the kettle you see water if you put it in the fridge and it will be solid again.

what happens to the pressure of a gas if its volume is reduced?

Answers

Answer:

When the volume decreases, the pressure increases. This shows that the pressure of a gas is inversely proportional to its volume. This is shown by the following equation - which is often called Boyle's law. ... It means that for a gas at a constant temperature, pressure × volume is also constant.

Explanation:

may i have the brainlyest

Answer:

When the volume decreases, the pressure increases. This shows that the pressure of a gas is inversely proportional to its volume. ... It means that for a gas at a constant temperature, pressure × volume is also constant.

Explanation:

According to Democritus, which substance cannot be divided?
O A. molecules
O B. matter
O C. compounds
OD. atoms

Answers

Answer:

D.) Atoms.

I hope this helps! :)

when using a ph meter to monitor a stirring reaction mixture, where should you place the ph sensor electrode?

Answers

Answer:Between the stirring vortex and the side of the glassware

When using a ph meter to monitor a stirring reaction mixture, the ph sensor electrode

should be placed;

between the stirring vortex and the side of the glassware.

The pH meter is an electric device that is used to measure the hydrogen-ion activity in water-based solutions. This means that it is used to measure the PH which is the acidity or alkalinity.

The pH meter is made up of a voltmeter attached to a pH-responsive electrode and a reference electrode.

Now, this pH-responsive electrode is usually made of glass while the reference electrode is usually a silver–silver chloride electrode.

Now when monitoring the stirring reaction mixture, the PH-responsive electrode written above is usually placed between the stirring vortex and the side of the glassware.

Read more at; https://brainly.com/question/24242819

I will brainless who can answer this all pleaseeeeej​

Answers

Answer:

False, True, True, False, False, not sure, True, False, True, True

here u go

How do I know the melting point and boiling point of each chemical?

Answers

Calculate the change in boiling or freezing temperature using one the following formulas: ΔTf = Kf * m or ΔTb = Kb* m.

Add the value obtained for ΔTb to the standard boiling point of the solvent (ex. 100 C for water) or subtract the value obtained for ΔTf from the standard freezing point of the solvent (ex. 0 C for water).

the rays produced in a cathode tube are

Answers

Answer:

Electrons

Explanation:

Cathode rays carry electronic currents through the tube. Electrons were first discovered as the constituents of cathode rays. J.J. Thomson used the cathode ray tube to determine that atoms had small negatively charged particles inside of them, which he called “electrons.”

The rays produced in a cathode tube are electrons which are present in the shells surrounding the nucleus of an atom.

What is an atom?

An atom is defined as the smallest unit of matter which forms an element. Every form of matter whether solid,liquid , gas consists of atoms . Each atom has a nucleus which is composed of protons and neutrons and shells in which the electrons revolve.

The protons are positively charged and neutrons are neutral and hence the nucleus is positively charged. The electrons which revolve around the nucleus are negatively charged and hence the atom as a whole is neutral and stable due to presence of oppositely charged particles.

Atoms of the same element are similar as they have number of sub- atomic particles which on combination do not alter the chemical properties of the substances.

Learn more about atom,here:

https://brainly.com/question/13654549

#SPJ6

I'll mark brainly pls help

Answers

I feel bad that nobody answered

Write an equation of a line parallel to y=3x-1 passing through the point (0,3).

Answers

Answer:

wow never heard the question

why do we need to calibrate equipment​

Answers

Answer:

to be precise in the calculations

Explanation: for example your cell phone has a gps inside it, the gps is responsible for providing direction data like a compass, if the equipment is not calibrated, the gps will not find the correct direction.

Compare the types of elements in covalent molecular compounds vs. ionic compounds. explain

Answers

Answer:

Covalent or molecular compounds form when elements share electrons in a covalent bond to form molecules. Molecular compounds are electrically neutral. Ionic compounds are (usually) formed when a metal reacts with a nonmetal (or a polyatomic ion). Covalent compounds are formed when two nonmetals react with each other.

Explanation:

Hope this helps.

Can u please help me on this question, first person to answer will be marked brainlist

Put the words in order like 1 something 2 something 3 something or whatever u think is the best way to answer this question for me

Answers

Answer:

1.이산화탄소

2.낮은

3.높은

4.쓰레기

5.빠른

6.산소

7입자

Explanation:

내가 틀렸다면 나를 수정하는 데 도움이되기를 바랍니다.

Other Questions
Does anyone know know this? Explain the mechanism for cell mediated immunity plz help i need to pass this to bring my grade up. it has all the pages for the passage in it PLZ HELP Polymers are formed by hydrolysis true or false The area of a room is 65.25 meters squared. If its width is 8.7 meters, what is its length? Select the circumstance when the expression (a = b) is true. a = 1, b = 2 a = 1, b = 1 a = 1, b = 2 a = 2, b = 1 the following are the advantages of partnership except one 6. during the first part of prophase, dna condenses into? HELPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPP The average vertical jump for a player on the high school basketball team is 30 inches. The actual height varies byat most 2 inches. Write and inequality that gives the range of the actual height h (in inches) of the players' verticals. Draw a logic gate circuit for each of the following Boolean expressions. 1- F= AB 2-F = A + (B*C) 3-F= (A*B) + (A*C) identify the part of a rib that articulates in the demi-facets of the thoracic vertebra. Solve for x not y please I am stuck For This activity, you will create a diagram for each of the solutions you tested showing the dissolved solutes. Make sure to label the correct charges on the ions and circle the solutes that do not have charge. include a brief explanation under each diagram of its conductivity. Finally, write a brief explanation of what would happen to the conductivity of the ionic solutions if you were to mix in a covalant compound such as a sugar or one of the covalent solutions. Where have you seen a similar experiment and results? jude uses me in a beam with loads of others like me to find new materals listen to each statement made by jos miguel prez santoro, then indicate whether it is cierto or falso based on the illustration of his family tree. El diseo de un sistema requiere instalacin de 2 componentes iguales. El sistema completo funcionar si al menos 1 de los componentes funcionan,mientras que un sistema alternativo requiere cuatro de sus componentes funcionar si al menos 2 de sus componentes estn funcionando. La probabilidad de que un componente funcione de manera individual es de 0.9 y cada uno funciona de manera independiente. cul de los 2 diseos tienen mayor probabilidad de funcionar? Predict what would happen to a freshwater fish if it were placed into a marine environment (salt water). Justify using your knowledge of osmosis. * Find the value of x......... which state is the birthplace of an academy award winner for best actor?