Answer:
They appear to recede from our viewpoint.
That is, their emitted spectra are shifted toward the red (red-shift).
The wave-lengths that are received on earth are somewhat longer because of the "Doppler" shift of the receding atoms.
Consider a stage doing batch processing with a required setup. if the batch size increases 2 times, how would the stage capacity be affected?
The correct answer for the affect in the stage capacity is that it will increase.
The stage's capacity will increase .
The capacity formula is as follows:
Capacity = (Batch size) / (Total setup time + processing time x batch size)
Clearly, increasing the batch size twice will increase capacity, but not in the same proportion because the batch size is the same in the numerator and denominator. Increasing the batch size will increase the capacity but in very small proportions. Furthermore, if the batch size is too large, goods will be produced even if there is no demand, and if the batch size is too small, capacity will be lost. As a result, there is a trade-off between batch size and capacity.
Learn more about stage capacity here :-
https://brainly.com/question/24317294
#SPJ4
Crystal lake, inc., has a total debt ratio of 0.36. what is its debt-equity ratio?
When the total debt ratio is 0.36, the debt-equity ratio is 0.5625.
What does debt-to-equity ratio mean?The debt-to-equity ratio is a financial metric that shows how much debt and shareholder equity were utilized to finance the assets of a company. The ratio, often known as risk, gearing, or leverage, is closely related to leveraging. The debt-equity ratio serves as a gauge for how equally creditors and owners or shareholders contributed to the capital used by the company. The debt-equity ratio is the simple ratio of all long-term debt and equity capital in the company. The debt-to-equity ratio is calculated by dividing a company's total liabilities by the sum of its shareholders' equity. For the majority of businesses and industries, a desirable debt-to-equity ratio is around 2.0. A high debt-to-equity ratio shows that a business is using more market capital to finance its operations, whereas a low debt-to-equity ratio shows that the business is making better use of its assets and using less market capital. The debt-to-equity ratio is often higher in the capital industries.
Total Debt ratio = Debt/Asset
Hence, Debt=0.36*Total Assets
Assets = Debt*Equity
Hence Equity=(1-0.36)*Total Assets=0.64*Total Assets
So, Debt-Equity Ratio=Debt/Equity
=0.36Total assets/0.64Total assets
=0.5625
⇒Debt-Equity Ratio=0.5625
To know more about debt-to-equity ratio, click here:
https://brainly.com/question/17154512
#SPJ4
For customer arrivals, the random number interval assigned to the time between arrivals of 2 minutes is:_________
For customer arrivals, the random number interval assigned to the time between arrivals of 2 minutes is 0.0500-0.19999.
What do you mean by time?Time is the continued sequence of the existence and events that occurs in an apparently irreversible succession from the past, through the present, into the future. It is a component quantity of the various measurements used to sequence events, to compare the duration of events or the intervals between them, and to quantify rates of change of quantities in material reality or in the conscious experience. Time is often referred to as a fourth dimension, along with the three spatial dimensions.
Time has long been an important subject of the study in religion, philosophy, and science, but defining it in a manner applicable to all fields without circularity has consistently eluded scholars. Nevertheless, diverse fields such as the business, industry, sports, the sciences, and the performing arts all incorporate some notion of time into their respective measuring systems.
Time in physics is operationally defined as the "what a clock reads".
The physical nature of the time is addressed by general relativity with respect to events in spacetime. Examples of events are collision of two particles, the explosion of a supernova, or the arrival of a rocket ship. Every event can be assigned the four numbers representing its time and position (the event's coordinates).
However, the numerical values are different for the different observers. In general relativity, question of what time it is now only has meaning relative to a particular observer. Distance and the time are intimately related, and the time required for light to travel a specific distance is the same for all observers, as first publicly demonstrated by Michelson and Morley. General relativity does not address nature of time for extremely small intervals where quantum mechanics holds. At this time, there is no generally accepted theory of the quantum general relativity.
To know more about time visit : https://brainly.com/question/15356513
#SPJ4
As your friend skateboards down a hill, you measure their velocity at 1.0-second
intervals. You record the following data: ((0.0 s, 0.0 m/s), (1.0 s, 2.3 m/s),
(2.0 s, 4.6 m/s)}. Determine your friend's acceleration.
Answer:
what does the acronym VAT stand for
The correct answer for the acceleration is [tex]2.3[/tex] m/s².
Given:
Initial velocity:- [tex]0.0[/tex] m/s
Final velocity:- [tex]4.6[/tex] m/s
Time interval:- [tex]2.0[/tex] seconds
Acceleration calculated here will be average acceleration:
From equation of motion:
[tex]v= u+at[/tex]
[tex]a = \dfrac{v-u}{t}[/tex]
[tex]= \dfrac{4.6 -0.0}{2}[/tex]
[tex]= 2.3[/tex]
Acceleration is [tex]2.3[/tex] m/s².
Learn more about Equation of motion here:
https://brainly.com/question/33951478
#SPJ7
In how many ways can the elements of [n] be permuted if 1 must precede 2 and 3 is to precede 4?
No. of ways in the elements of n be permuted is n!/4
Number of elements = n
Number of face in which the element of n be permuted if 1 must proceed 2 and 3 is to precede 4.
n = 4
The possible permutation will
(1,2,3,4), (1,3,2,4),(1,3,4,2),(3,4,1,2),(3,1,2,4),(3,1,4,2)
There are 6 possible outcomes
For n= 5
With 1,2,3,4 we add 5 in the arrangement with above terms
The possible number of permutation
5×6 = 30
When n = 6
30×6 = 180.
So for an element
If 1 precede 2 and 3 is yo precede 4 is
[tex]\frac{n*(n-1)*(n-2) ........ 6*5*6*4!}{4!}[/tex]= n! ×6/4!
= n!/4
No. of ways in the elements of n be permuted is n!/4
To know more about permutation:
https://brainly.com/question/4416319
#SPJ4
Water comes down the spillway of a dam from an initial vertical height of 170 m. what is the highest possible speed of the water at the end of the spillway?
The speed of water at the end of spillway is 57.7 (m/s)
Calculation:
According to the Bernoulli equation:
P/? + v^2/2 + gz = constant
However, the atmospheric pressure and density are essentially the same at the peak and bottom of the falls. Therefore,
v^2/2 + gz = constant , so:
v_bottom^2/ 2 = v_top^2/2 + gz, or:
v_bottom = sqrt(v_top^2 + 2gz) = sqrt(v_top^2 + 2g*170)
If v_top ~ 0, then:
v_bottom ~ sqrt(2gz) = sqrt(2*9.8*170) = 57.7 (m/s)
What is the flow rate of water?
The amount of water that might theoretically flow out of your kitchen faucet or bathtub each minute is measured by your water flow rate, sometimes referred to as your gallons per minute (GPM). Your flow rate is affected by a number of variables, but your household size is the most important one.
To learn more about flow rate of water, visit:
https://brainly.com/question/24560420
#SPJ4
Object a is moving at speed v in a circle of radius r. object b is moving at speed 2v in a circle of radius r/2. what is the ratio of the period of object a to the period of object b?
The correct answer for the ratio of the period of object a to the period of object b 4.
we know time for one revolution. around which is the period for one revolution it has to travel distance equal to perimeter.
So, speed of object in circular motion
v = perimeter /t
time period = 2πr/v
for object A ,Ta = 2 π R/ v
for abject B, Tb = (2π R/2 )/2v
now Ta / Tb = ((2πR)/v)/((2π(R/2))/(2V)) = 1/(1/4) = 4
Circular motion is defined in physics as the movement of an object around the circumference of a circle or the rotation of an object along a circular path. It can be uniform, with a constant angular rate of rotation and speed, or non-uniform, with a variable rate of rotation.When the magnitude of an object's velocity in uniform circular motion is v, the velocity is equal to the circumference C of the circle divided by the period. As a result, V = fracCT. The circumference of a circle is equal to pi multiplied by R. So, C = 2Π R.
Learn more about circular motion here :-
https://brainly.com/question/2285236
#SPJ4
Ordered: vistaril 75 mg im now. used with permission from pfizer, inc how many ml will you give for each dose?
Option c) 1.5 ml of volume will be given for each dose.
How does Vistaril work and what does it do?The prescription drug Vistaril is used as preoperative sedation, to treat anxiety symptoms, and to cure skin hives or itching. Vistaril may be taken either on its own or along with other drugs.
The class of medications that includes Vistaril includes antiemetic agents, first-generation antihistamines, and piperazine derivative antihistamines.
What Vistaril side effects might there be?Serious adverse reactions to Vistaril include:
Heartbeats that are rapid or hammering, headaches accompanied by chest pain, extreme dizziness, fainting, and convulsions (seizures)
Immediately seek medical attention if you experience any of the above symptoms.
The most typical Vistaril side effects include:
Fatigue, headache, dry mouth, and rash on the skin
To know more about Vistaril, visit:
https://brainly.com/question/19567325
#SPJ4
What is the average rate from 2.0 to 6.0 seconds in mol / l s? use 4 decimal places
The average rate from 2.0 to 6.0 seconds in mol/L is 0.004025 mol/L.
What is decomposition reaction ?Decomposition reactions are those in which a reactant undergoes reaction to form two or more products.
2AX2(g) -------> 2AX(g) + X2(g)
t1 = 2.0 s and t2 = 6.0 s
x1 = 0.0249 and x2 = 0.0088
Average rate of reaction:
Ra = ∆[x]/DeltaT = X2 - X1/t2 - t1
Ra = 0.0088 - 0.0249/6 - 2 = 0.004025 mol
Thus, the average rate is 0.004025 mol/L.
Learn more about Average rate here:
https://brainly.com/question/8728504
#SPJ4
Suppose the irregularly
shaped object is a massive whale shark that
is about to be moved into a cube-shaped
aquarium tank. How might you combine the
"Length × Width x Height" formula with the
displacement method to determine the
shark's volume? Explain.
The displacement method can be used to determine the shark's volume by measuring the corresponding volume of the displaced water in the can.
How to measure the volume of irregular shapeIf the object has an irregular shape , the volume can be measured using a displacement can.
The displacement can is filled with water above a narrow spout and allowed to drain until the water is level with the spout. As the irregular object is lowered into the displacement can, the water level rises.
The level of water displaced is the volume of the irregular shape.
Thus, the displacement method can be used to determine the shark's volume by measuring the corresponding volume of the displaced water in the can.
Learn more about displacement can for volume measurement here: https://brainly.com/question/20582731
#SPJ1
The idea that light consists of photons, bundles of pure energy, was first proposed by?
Einstein was the first to postulate that light is made up of photons, which are essentially energy bundles.
What a photon is made of?A photon is a microscopic particle made up of electromagnetic radiation waves. Maxwell demonstrated that photons are merely electric fields moving through space. Photons move at the speed of light and have no charge or rest mass. Charged particles produce photons, though they can also be produced by other processes, such as radioactive decay.
It's common to refer to photons as energy packets. This analogy is excellent because a photon has uncondensable energy. An alternating electric field is how this energy is kept in reserve. The universe's size, which is the longest theoretical wavelength of light, and the Planck length, which some theories claim to be the smallest, have never been measured. These energy packets may travel great distances without losing energy or speed. In vacuum, photons move at the speed of light, which is 2.997 x 108 m/s.
To learn more about Photons, visit:
https://brainly.com/question/8933577
#SPJ4
Find the velocity and position vectors of a particle that has the given acceleration and the given initial velocity and position. a(t) = 6 i 3 j, v(0) = k, r(0) = i
Use the fundamental theorem of calculus.
[tex]\displaystyle \vec v(t) = \vec v(0) + \int_0^t \vec a(u) \, du[/tex]
[tex]\displaystyle \vec v(t) = \vec k + \int_0^t (6\,\vec\imath+6\,\vec\jmath) \, du[/tex]
[tex]\boxed{\vec v(t) = 6t\,\vec\imath + 6t\,\vec\jmath + \vec k}[/tex]
[tex]\displaystyle \vec r(t) = \vec r(0) + \displaystyle \int_0^t \vec v(u) \, du[/tex]
[tex]\displaystyle \vec r(t) = \vec\imath + \displaystyle \int_0^t (6t\,\vec\imath + 6t\,\vec\jmath + \vec k) \, du[/tex]
[tex]\boxed{\vec r(t) = (3t^2 + 1)\,\vec\imath + 3t^2\,\vec\jmath + t\,\vec k}[/tex]
The velocity vector is v(t) = 6t i + 3t j + k, and the position vector is r(t) = [tex]\rm 3t^2 i + (3/2)t^2 j + kt + i.[/tex]
We have to integrate the specified acceleration vector to obtain the velocity vector of the particle before integrating the velocity vector to obtain the position vector of the particle.
So, the acceleration vector: a(t) = 6i + 3j
We will the find the velocity vector,
To find the velocity vector, we integrate the acceleration vector with respect to time 't':
∫a(t) dt = ∫(6i + 3j) dt
when we integrate with respect to time 't' that gives us:
v(t) = 6t i + 3t j + C
where 'C' is the constant of integration.
Using the initial velocity condition to find 'C':
Given initial velocity: v(0) = k
Substitute t = 0 into the velocity vector equation:
v(0) = 6(0) i + 3(0) j + C
k = C
So, C = k
We put the value of 'C' back into the velocity vector equation:
v(t) = 6t i + 3t j + k
Calculate the position vector r(t):
To find the position vector, we integrate the velocity vector with respect to time 't':
∫v(t) dt = ∫(6t i + 3t j + k) dt
Integrating with respect to time 't' gives us:
r(t) = [tex]\rm 3t^2 i + (3/2)t^2 j + kt + D[/tex]
where 'D' is the constant of integration.
We use the initial position condition to find 'D':
Given initial position: r(0) = i
Substitute t = 0 into the position vector equation:
r(0) = [tex]\rm 3(0)^2 i + (3/2)(0)^2 j[/tex]+ k(0) + D
i = D
So, D = i
when we put the value of 'D' back into the position vector equation:
r(t) = [tex]\rm 3t^2 i + (3/2)t^2 j + kt + i[/tex]
Therefore, the velocity vector is v(t) = 6t i + 3t j + k, and the position vector is r(t) = [tex]\rm 3t^2 i + (3/2)t^2 j + kt + i.[/tex]
Learn more about velocity vector, here:
https://brainly.com/question/33520497
#SPJ7
After oxygen has been administered, the next priority intervention the nurse would initiate for a patient with a pulmonary embolus is the administration of which of these therapies?
After oxygen has been administered, the next priority intervention the nurse would initiate for a patient with a pulmonary embolus is the administration of IV Heparin.
What is Heparin?Heparin is a prescription medicine used to treat and prevent symptoms of blood clots caused by medical conditions or medical procedures. Heparin may be used alone or with the other medications. Heparin belongs to a class of drugs called the Anticoagulants, Cardiovascular, Anticoagulants, Hematologic.
What are the side effects of Heparin?Heparin may cause serious side effects including:
skin warmth or discoloration,
chest pain,
irregular heartbeats,
shortness of breath,
dizziness,
anxiety,
sweating,
unusual bleeding or bruising,
severe pain or swelling in your stomach, lower back/growing
dark or blue-colored skin on your hands/feet,
nausea,
vomiting,
loss of appetite,
unusual tiredness,
bleeding that will not stop,
nosebleed,
blood in the urine or stool,
black or tarry stools,
coughing up blood or vomit that looks like the coffee grounds,
skin changes where the medication was injected,
fever,
chills,
runny nose,
watery eyes,
easy bruising,
purple or red spots under your skin,
sudden numbness or weakness,
problems with vision or speech, and
swelling or redness in an arm or leg
To know more about cardiovascular visit: https://brainly.com/question/14349574
#SPJ4
If, in the figure, you start from the Bakery, travel to the Cafe, and then to the Art Gallery in 1.50 hours. What is the average velocity?
The average velocity is 1 km/hr.
What is average velocity?Velocity is the speed of a body in a given direction.
Velocity can also defined as the displacement of body with time.
The average velocity will be be the ratio of the total displacement with time.
Average velocity = displacement/timeTaking the right direction as positive and the direction to the left as negative:
displacement of the body = (4.0 - 2.5) km
displacement of the body = 1.5 km
Average velocity = 1.5 km/ 1/5 hours
Average velocity = 1 km/hr
In conclusion, the average velocity is obtained from the displacement and time taken.
Learn more about average velocity at: https://brainly.com/question/4931057
#SPJ1
A ship travels 20 km to the south and then 40 km to the west. the ship's displacement from its starting point is?
A ship travels 20 km to the south and then 40 km to the west. The ship's displacement from its starting point is approximately 44.7 km. Hence, the displacement is approximately 45 km.
Here, the calculation is done,
a = 20 km (southward movement)
b = 40 km (westward movement)
Now, one can find the displacement (d) using the Pythagorean theorem:
d² = a² + b²
d² = (20 km)² + (40 km)²
d² = 400 km² + 1600 km²
d² = 2000 km²
Now, by taking the square root of both sides to find the displacement (d):
d = √(2000 km²) d ≈ 44.7 km (rounded to one decimal place)
So, the ship's displacement from its starting point is approximately 44.7 km.
Hence, the displacement is approximately 45 km.
Learn more about the calculation of displacement here.
https://brainly.com/question/28740877
#SPJ7
A high-voltage power line is a catenary described by y = 9cosh(x/9) find the ratio of the area under the catenary to its arc length.
The correct answer for the ratio of the area under the catenary to its arc length is 12 : 1 .
y = 12cosh(x/12) Since the анс length from FGN) on the interval [c, d] is Arc length =
Let y' =f'(x) prime = derivative of 12cosh(x/12) for x = Sinh(x/12) .
. A(x) length = ∫√1+ Sinh² (1/2). dx
= int c ^ d sqrt(cosh^2 (alpha/12)) * dx
= integrate d from c to d cosh( x 12 )* dx
=[12. sinh(x/12) ] e ^ d
= 12[sinh(d/12) - sinh(c/12)]
and area under f(x) on the interval [c, d]
Area = ∫ f(x).dx from [c,d ]
= 144[sinh(d/12) - sinh(c/12)]
the area ratio of the area under the catenary to it's length is
= 144[sinh((d)/12) - sinh(c/12))/ 12[sinh( d/ 12 ) -sinh( c /12 )] .
=12
So, ratio is 12:1
Learn more about area under curve here :-
https://brainly.com/question/15122151
#SPJ4
In traditional mass media, __________ is the paid media space that sponsors use to persuade audiences
In traditional mass media, advertising is the paid media space that sponsors use to persuade audiences
Advertising is a form of communication aimed at publicizing a product or service in order to influence the public to purchase or use it.
This type of communication is paid and promoted by companies and media with a commercial purpose.
For example, a company specializing in designing and implementing ads for other company's products is an advertising company.
There are four types of advertising:
DisplayVideoMobileNativeWhat is communication?the communication is a process through which information is transmitted through the use of oral or written language.
Learn more about communication at: brainly.com/question/26152499
#SPJ4
What is the average rate of decomposition of a3 in the time interval 20-30 seconds?
5.0E-6(0.000005) is the average rate of decomposition of a3 in the time interval 20-30 seconds.
what is decomposition?Decomposition, often known as rot, is the breakdown of dead organic matter into more basic organic or inorganic components such carbon dioxide, water, simple sugars, and mineral salts.The procedure, which is a component of the nutrient cycle, is crucial for recycling the limited amount of stuff that takes up real estate in the biosphere.After a live thing dies, its body starts to decay.Animals like worms also contribute to the breakdown of the organic compounds. Decomposers are organisms that carry out such processes.Despite the fact that no two creatures degrade in exactly the same way, they all go through the same sequential phases.Taphonomy, which comes from the Greek word taphos, which means tomb, is the broad name for the science that examines decomposition.To learn more about decomposition, refer to the following link:
https://brainly.com/question/27300160
#SPJ4
What is the atomic number for an element whose mass number is 115, which contains 66 neutrons per atom?
The atomic number for an element whose mass number is 115, which contains 66 neutrons per atom is: 49
The formula and procedure we will use to solve this problem is:
number of protons = mass number - number of neutronsatomic number = number of protonsInformation about the problem:
mass number = 115number of neutrons = 66atomic number =?Applying the number of protons formula we get:
number of protons = mass number - number of neutrons
number of protons = 115 - 66
number of protons = 49
Applying the atomic number formula we get:
atomic number =number of protons
atomic number = 49
What is an atom?The atom is the smallest part of the composition of matter, it is indivisible and is composed of a nucleus that has protons and neutrons, and around the nucleus there are the electrons.
Learn more about the atom at: brainly.com/question/17545314
#SPJ4
If the maximum energy given to an electron during compton scattering is 30 kev, what is the wavelength of the incident photon?
Required wavelength is λ = 0.0119 nm
The Compton effect in physics is defined as the phenomenon that arises when a specific beam is dispersed on a specific particle with an increase in wavelength.
Equation :Given;
The campton scattering is k = 30 kev
The speed of light is c = 2.9979 X 10 ⁸ m/s
The planck's constant is h = 6.626 X 10⁻³⁴
The expression from Campton shift is given by,
λ' - λ = λc (1 - Cos∅)
Here, ∅ is the angle of scattering whose value is 180° for maximum energy transfer and λc is the campton wavelength whose value is
λc = h/mc
substitute the values in the above expression
λ' - λ = λc (1 - Cos 180°)
λ' - λ = 2 (h/mc)
Here, m is the mass of electron
On rearing the above expression
λ' = λ + 2 (h/mc)
The expression from conservation of energy is given by,
E - E' = k
(hc/λ) - (hc/λ') = k
hc((λ' - λ)/λλ') = k
hc ((λ' - λ)/k) = λλ'
Here E and E' are the initial and final energy of electron
substitute the values in the above equation
hc (2(h/mc)/k)) = λ (λ + 2 (h/mc))
λ² + (2h/mc)λ - 2h²/mk = 0
λ² + [tex]\frac{2(6.626X10^{-34}Js)}{(9.11X10^{-31}kg) (2.997X10^{8}m/s ) }[/tex] λ - [tex]\frac{2(6.626X10^{-34}Js)}{(9.11X10^{-31}kg) (30X10^{3}evX\frac{1.6X10^{-19} }{1ev} J) }[/tex] = 0
λ² + (4.85X10⁻¹²)λ - (2X10⁻²²) = 0
On solving the above expression
λ = 1.19 X 10⁻¹¹ m
λ = (1.19 X 10⁻¹¹ m X 10⁹ nm/1m)
λ = 0.0119 m
Thus, required wavelength is λ = 0.0119 nm
Learn more about the Wavelength with the help of the given link:
https://brainly.com/question/12924624
#SPJ4
Which layer of the osi model ensures the data being sent from the sender is formatted correctly so it can be interpreted correctly by the recipient system?
6th layer of OSI model ensures complete and rebel delivery of data packets.
(presentation layer is the 6th layer.)
OSI - Open system Interconnection is a conceptual model that provides a common basis for the condition.
It is a reference model for how application communicate over a network.
This model describes 7 layer that computer system used to communicate over a network.
It was the model for network communication and adopted by all major computer and companies.
The complications between US computing system are split in several layers.
physical. Datalink. Network. Transport. Session Presentation Application.The purpose of OSI reference model is to guide technology developer.
4th layer (presentation layer) of OSI model ensures complete and rebel delivery of data packets.
To know more about OSI model :
https://brainly.com/question/14476910
#SPJ4
The postal service had a special deal. You could ship up to 2 kg for five dollars for a
limited time. For Amy's friend's birthday, Amy wanted to ship her sweets and candy,
and she wanted to get the best bang for her buck. She first made her cookies. They
had a mass of 400 grams. How many kilogram (s) of sweets and candy could Amy
still ship if only the cookies were in the box for the five dollar special?
weight of sweets and candy is 1.6kg
It is given that a total weight of 2 kg is allowed by the postal service
The weight of cookies is given to be 400gm
we know that 1kg =1000gm
400gm= 400/1000 gm =0.4kg
Therefore weight of sweets and candy that Amy can send=
total weight- weight of cookies
=2kg - 0.4kg
=1.6kg
Therefore, weight of sweets and candy is 1.6kg
#SPJ9
4. Computer programmers in the 1970s thought 8 kilobytes was a lot of memory and the
computers fit the space of about 10 textbooks. Some cell phones today can store 128
Gigabytes. How many 1970 computers would it take to match the memory of a cell
phone today?
Answer:
1.28E11 / 8.0E3 = 1.60E7 computers (16,000,000 computers)
What approach responds to the limitations of the other legacy-measuring methods?
The other-legacy measuring methods' weaknesses are addressed by the bottom-up approach.
An organizational decision-making process known as a "bottom-up approach" begins at the bottom of the hierarchy rather than the top. In actuality, this means that choices won't always be made by the CEO or department head (this is known as a top-down approach).
What distinguishes a bottom-up strategy from a top-down approach?
When choices affecting the entire organization are made, top-down management is used, whereas bottom-up management involves all teams in these types of decisions.The bottom-up approach often focuses its analysis on specific traits and micro features of a single stock. The focus of bottom-up investment is on fundamentals that apply to individual companies or industries.What bottom-up management has to offer:
Promoting cooperation.Enhancing morale. Creating new insights. Enabling your group.To learn more about Bottom-up approach, visit:
https://brainly.com/question/14346585
#SPJ4
Astronomers have not yet been able to detect planets outside our solar system. true false
___________ measurements of the orbital radii of six of the planets were very accurate compared to our modern values.
Copernicus measurements of the orbital radii of six of the planets were very accurate compared to our modern values.
Describe Copernican heliocentrism.Nicolaus Copernicus created the Copernican heliocentrism astronomical theory, which was first presented in print in 1543. This theory put the Sun in the centre of the cosmos, stationary, and had Earth and the other planets orbit it at uniform speeds in circular orbits modified by epicycles. The geocentric Ptolemaic paradigm, which put Earth at the centre of the cosmos for ages, was replaced by the Copernican model.
Although he had shared a draught of his own heliocentric theory with peers before 1514, he did not choose to publish it until after being persuaded to do so by his student Rheticus.
To know more about Copernican heliocentrism, visit:
https://brainly.com/question/4982992
#SPJ4
When using higher magnification, you need more light. which parts of the microscope can be adjusted to provide more light, and how would you adjust those parts to increase the light?
Increased lamp voltage is achieved by turning the light intensity dial.
To enlarge the diameter of the hole and let more light through the slide, the iris diaphragm was modified.
Condenser: Position it higher and closer to the slide's bottom to better direct light to the centre of the slide.
How do you adjust the light level on a microscope?Utilize the brightness adjustment knob to change the brightness. Turn the brightness control knob while looking through the eyepieces to make sure there is no glare in the field of view.
Use a daylight balancing filter if your compound microscope has a certain sort of illumination. It typically rests directly on top of the luminator or in a filter holder above the light. This filter is blue.
The daylight balancing filter will correct the colour temperature and produce a higher-quality image if your microscope is lighted by tungsten or halogen (and a better colour image). This blue filter is not necessary if your microscope is an LED.
To learn more about light level on a microscope, visit:
https://brainly.com/question/14727797
#SPJ4
In animals, carbohydrates are stored in ______ granules adjacent to the smooth er membrane in liver cells. these release energy upon demand.
As the liver cells of animals, carbohydrates are kept in glycogen granules close to the inner membrane. On demand, these release energy.
Where can you find glycogen ?In addition to human muscle and liver cells, other cells such as those in the brain, heart, smooth muscle, kidney, red and white blood cells, and even adipose tissue also store modest amounts of glycogen.
Glucose is stored in the form of glycogen. It is a sizable, multi-branched polymer of glucose that is converted back into glucose in response to glucagon and accumulates in response to insulin. The fact is that because fat is such an energy-dense molecule and contains so many calories per gram, ounce, or pound, it is far simpler to lose weight when your body burns carbohydrates instead of fat. While a gram of glycogen only contains four calories, a gram of fat has nine calories.
To learn more about glycogen , visit
brainly.com/question/13228171
#SPJ4
There is a negative surface charge density in a certain region on the surface of a solid conductor. just beneath the surface of this region, the electric field
Just beneath the surface of this region, the electric field is zero.
Surface charge densityCharge density is a measure of the amount of electric charge present in a space per unit volume in one, two, or three dimensions, according to electromagnetism.
The quantity of electric charge per surface area or volume, respectively, is known as the linear surface or volume charge density.
What is the surface charge density equation?Σ = q/A
The formula for surface charge density is = q/A, and the SI unit for surface charge density is coulombs per square meter (cm2). Assuming q is the charge and an is the area of the surface over which it flows
What does surface charge mean?A two-dimensional surface having a positive electric charge is called a surface charge. This 2-D surface and surface are restricted by these electric charges.
To know more about surface charge density visit:
https://brainly.com/question/28447120
#SPJ4
A jetliner goes from rest to a takeoff speed of 183 mi/h in 36.1 s. what is the magnitude of its average acceleration?
A jetliner goes from rest to a takeoff speed of 183 mi/h in 36.1 s.
the magnitude of its average acceleration is 81.80
CalculationTake off speed of the jetliner = 183 mi/h
so time taken = 36.1s
average acceleration = change in velocity / time taken
= (183 x 1609.3)/ 3600
= 81.80 m/[tex]s^{2}[/tex]
What is average acceleration?The rate at which an object’s velocity changes is measured as its acceleration. Since it is a vector, speed and direction are also included. In the SI, acceleration is measured in meters per second squared (m s 2).
An object’s velocity is how quickly it is travelling in a specific direction. A vector, that is. In the SI, velocity is measured in meters per second (m s).
To know more about acceleration visit:
https://brainly.com/question/12550364
#SPJ4
