A line is graphed on the coordinate plane.
Type in the equation for this line? Use x as your independent variable and y as the dependent variable.

Answer:

$13.53

Step-by-step explanation:

Let's call the cost of a pepperoni pizza x.The total cost of the cheese and pepperoni pizzas before tax and tip is 1 * $11.00 + 3 * x = $57.59 - $3.00Simplifying the expression on the right side: $54.59 - $3.00 = $51.59Now we can solve for x:1 * $11.00 + 3 * x = $51.593 * x = $51.59 - $11.003 * x = $40.59x = $13.53So each pepperoni pizza costs $13.53

The pretax cost of the laptop is $1187.96. The solution has been obtained by using linear equation.

What is a linear equation?

This is the linear equation with the largest degree of one. This demonstrates that there are no variables in linear equations with exponents greater than 1. A straight line appears on the graph as a result of such an equation.

Let the price before tax be 'x'

So, tax = 7.6% * x

Tax = .076x

The total cost of computer is given by:

⇒Total cost = x + .076x

⇒Total cost = 1.076x

⇒1278.24 = 1.076x

⇒x = $1187.9553             (On dividing both sides by 1.076)

⇒x = $1187.96

Hence, the pretax cost of the laptop is $1187.96.

Learn more about linear equation from the given link

https://brainly.com/question/30092358

#SPJ1

Answer:

Reflection across the x-axis followed by dilation by a scale factor of with the center of dilation at the origin

Step-by-step explanation:

Rectangle EFGD has vertices at points E(-6,8), F(0,8), G(0,1) and D(-6,1).

1 transformation - reflection across the x-axis with the rule

So, the image rectangle E''F''G''D'' has vertices with coordinates

2 transformation - dilation by a scale factor of with the center of dilation at the origin. This transformation has the rule

Thus,

These are exactly vertices of rectangle E'F'G'D'.

Jayden measured a desk to be 4 feet. The actual measurement is 3. 2 feet. Jayden's percent error is 25%.

To calculate the percent error, we first need to find the difference between the measured value and the actual value, then divide that difference by the actual value, and multiply the result by 100 to express it as a percentage.

Jayden measured a desk to be 4 feet. The actual measurement is 3. 2 feet.

The difference between Jayden's measurement and the actual measurement is:

4 ft - 3.2 ft = 0.8 ft

The actual value is 3.2 ft, so the percent error is:

(0.8 ft / 3.2 ft) x 100% = 25%

Therefore, Jayden measured a desk to be 4 feet. The actual measurement is 3. 2 feet. Jayden's percent error is 25%.

To learn more about percent error:

https://brainly.com/question/3105259

#SPJ4

The set X ∪ Y is the union of sets X and Y, which is the set of all elements that are in either X or Y. In this case, X ∪ Y = X = {1, 2, 4, 8, 16, 32}.

The statement that is true about the quadratic functions is:

g(x) > h(x) for x = -1.

Here we have the two quadratic functions:

g(x) = x^2

h(x) = -x^2

Notice that h(x) = -g(x).

Also, g(x) is always positive or zero, while h(x) is always negative, but for x = 0 both have the same value.

g(0) = 0^2 = -0^2 = h(0)

Then the statement that is true is

g(x) > h(x) for x = -1.

Learn more about quadratic functions at:

https://brainly.com/question/1214333

#SPJ1

The spot on the shoreline is moving at a rate of about 1.764 feet per minute when it is 13 feet from the point on the shoreline closest to the lighthouse.

What is differentiation?

Differentiation is a mathematical operation that is used to find the rate at which a function changes. More specifically, it is the process of finding the derivative of a function.

The derivative of a function at a given point is a measure of how quickly the function is changing at that point. It gives the slope of the tangent line to the graph of the function at that point. The derivative can be thought of as the instantaneous rate of change of the function at that point.

Let's call the point on the shoreline closest to the lighthouse "P". We know that the distance from the spotlight to P is 130 feet, and we want to find the rate at which the distance from the spotlight to P changes when the spotlight is 13 feet from P.

To do this, we can use the chain rule to differentiate the distance formula with respect to time. Let's call the distance between the spotlight and P "d". Then:

                           d²= 130² + x²

Taking the derivative of both sides with respect to time gives:

                   2d * dd/dt = 0 + 2x * dx/dt

We can solve for dd/dt by plugging in the values we know:

130² + 13² = d²

d = [tex]\sqrt{(130^2 + 13^2)}[/tex] = 130.325 ft

2(130.325) * dd/dt = 2(13) * dx/dt

dd/dt = (13/130.325) * dx/dt

We know that the spotlight revolves at a rate of 281 rad/min, or 281/2π ≈ 44.7 revolutions per minute. Each revolution of the spotlight covers a distance of 2π * 130 feet, so its speed is:

(2π * 130 ft/rev) * (44.7 rev/min) = 18410.8 ft/min

To find dx/dt when x = 13, we need to find the angular velocity of the spotlight at that point. The spotlight makes one full revolution every 60/14 ≈ 4.29 seconds, so its angular velocity is:

2π radians/rev ÷ 4.29 s/rev = 1.47 radians/s

At any given moment, the angle between the spotlight and the line connecting the lighthouse and P is equal to the arctangent of x/130. When x = 13, this angle is:

arctan(13/130) ≈ 5.71°

The rate at which the angle is changing is equal to the angular velocity of the spotlight, so we can use the formula for the derivative of the arctangent to find dx/dt:

dx/dt = 130 * tan(5.71°) * (1.47 radians/s)

dx/dt ≈ 17.602 ft/min

Finally, we can substitute this value into the expression we found for dd/dt:

dd/dt = (13/130.325) * 17.602

dd/dt ≈ 1.764 ft/min

So the spot on the shoreline is moving at a rate of about 1.764 feet per minute when it is 13 feet from the point on the shoreline closest to the

Learn more about differentiation click here:

https://brainly.com/question/416343

#SPJ1

The y-intercept is 5, and the slope is -4. As a result, the line's equation is y = -4x + 5, where -4 is the slope and 5 is the y-intercept.

A linear equation is an algebraic equation of the form y = mx + b, where the slope is m and the y-intercept is b, and only a constant and a first-order (linear) term are included.

The slope and y-intercept of the linear equation 4x + y = 5,

we need to solve for y and put the equation in slope-intercept form, y = mx + b,

where the slope is m and the y-intercept is b

4x + y = 5

Subtract 4x from both sides:

y = -4x + 5

To know more about equation  visit:-

https://brainly.com/question/10413253

#SPJ1

Answer:Part A: To determine the average test score in your math class after completing test 2, substitute 2 for x in the linear function f(x) = 0.5x + 80.

f(2) = 0.5 * 2 + 80 = 81

So, the average test score in your math class after completing test 2 is 81.

Part B: To determine the test average for your science class after completing test 2, we can use the table of values for g(x) given in the problem. When x = 2, g(2) = 83. So, the average test score in your science class after completing test 2 is 83.

Part C: To determine which class had a higher average after completing test 4, we need to calculate the average test scores for both classes after test 4.

For the math class, we can use the linear function f(x) = 0.5x + 80 to find the average test score.

f(4) = 0.5 * 4 + 80 = 82

For the science class, we can use the table of values for g(x) given in the problem. When x = 4, g(4) = 85.

So, the average test score in your science class after test 4 is higher, 85 compared to 82 in your math class.

Step-by-step explanation:

To show that the wave function y=e^(b(x-vt)) is a solution of the linear wave equation (eq. 16.27), we need to plug the wave function into the equation and see if it satisfies the equation.

The linear wave equation (eq. 16.27) is given by:

∂^2y/∂x^2 = (1/v^2) ∂^2y/∂t^2

Plugging in the wave function y=e^(b(x-vt)) into the equation, we get:

∂^2(e^(b(x-vt)))/∂x^2 = (1/v^2) ∂^2(e^(b(x-vt)))/∂t^2

Taking the second derivative with respect to x, we get:

b^2 e^(b(x-vt)) = (1/v^2) ∂^2(e^(b(x-vt)))/∂t^2

Taking the second derivative with respect to t, we get:

b^2 e^(b(x-vt)) = (1/v^2) b^2 v^2 e^(b(x-vt))

Simplifying, we get:

b^2 e^(b(x-vt)) = b^2 e^(b(x-vt))

This shows that the wave function y=e^(b(x-vt)) satisfies the linear wave equation (eq. 16.27) and is therefore a solution of the equation.

Learn more about the linear wave equation : https://brainly.com/question/25699025

#SPJ11

Since the diameter of this circle is 14 cm, a measurement of the circumference of this circle to the nearest tenth is 43.96 centimeters.

Mathematically, the circumference of a circle can be calculated by using this mathematical expression:

C = 2πr or C = πD

Where:

Substituting the given parameters into the circumference of a circle formula, we have;

Circumference of circle, C = πD

Circumference of circle, C = 3.14 × 14

Circumference of circle, C = 43.96 centimeters.

Read more on a circle here: brainly.com/question/6615211

#SPJ1

The total surface area is π[(4/3)x]² + π(4/3)x². The area of the base is greater than the lateral area.

An equation is an expression that shows how numbers and variables are related using mathematical operations. Equations can be linear, quadratic, cubic and so on.

Given the cone. The surface area (SA) is given by the equation:

SA = πr² + πrs

where r is the radius of the cone and s is the slant height.

Given that the slant height is x and the radius of the cone is 4/3 the slant height = (4/3)x

Hence:

SA = πr² + πrs

The base area =  πr²; Lateral area = πrs

substituting:

The base area = π[(4/3)x]², the lateral area =  π(4/3)x²

Hence:

SA = π[(4/3)x]² + π(4/3)x²

The area of the base is greater than the lateral area.

Find out more on equation at: https://brainly.com/question/2972832

#SPJ1

We can say with 95% confidence that the true proportion of applicants accepted by Bridgeton University lies between 0.354 and 0.430.

What is confidence interval?

A confidence interval is a range of values that is likely to contain the true value of a population parameter with a certain degree of confidence. It is an interval estimate computed from a sample of data and is used to describe the uncertainty or variability associated with a sample estimate of a population parameter.

To calculate the confidence interval, we need to first find the point estimate of the proportion of applicants accepted by Bridgeton University:

Point estimate = number of applicants accepted / total number of applicants = 392 / 1000 = 0.392

The standard error of the proportion can be calculated as:

SE = sqrt(p*(1-p)/n), where p is the point estimate and n is the sample size.

SE = sqrt(0.392*(1-0.392)/1000) = 0.0194

To find the 95% confidence interval, we can use the formula:

CI = point estimate +/- z*SE, where z is the z-score for a 95% confidence level (1.96).

CI = 0.392 +/- 1.96*0.0194

CI = (0.354, 0.430)

Therefore, we can say with 95% confidence that the true proportion of applicants accepted by Bridgeton University lies between 0.354 and 0.430.

To evaluate whether Bridgeton's claim seems accurate, we can compare the confidence interval with the claimed acceptance rate of 42%. We can see that the claimed acceptance rate of 42% does not fall within the confidence interval, which suggests that the claim may not be accurate. However, it is important to note that this sample may not be representative of the entire population of applicants to Bridgeton University, and further investigation may be needed to confirm the accuracy of the claim.

Learn more about confidence interval click here:

https://brainly.com/question/15712887

#SPJ1

Answer:

32

Step-by-step explanation:

since 8 students are 25% of the class then 25% is also a way of saying 1/4……4/4 would represent the entirety of the class so 8 times 4 is 32 which is the total number of students in the class

When the water cooler is completely full, there are approximately 143.52 gallons of water in it.

To calculate the number of gallons of water in the water cooler when it is completely full, we can use the formula for the volume of a cylinder, which is:

Volume = π * (radius)^2 * height

where radius is half of the diameter, and π is the constant pi.

In this case, the diameter of the water cooler is 3.5 feet, so the radius is 1.75 feet. The height of the water cooler is 2 feet. Plugging these values into the formula, we get:

Volume = 3.14 * (1.75)^2 * 2 = 19.18 cubic feet

To convert this volume to gallons, we can multiply it by the conversion factor of 7.48 gallons per cubic foot:

Volume in gallons = 19.18 * 7.48 = 143.52 gallons

In summary, to calculate the number of gallons of water in a cylindrical water cooler, we can use the formula for the volume of a cylinder and then convert the resulting volume from cubic feet to gallons using a conversion factor.

In this case, we needed to use the diameter and height of the water cooler, along with the constant pi and the conversion factor of gallons per cubic foot, to calculate the number of gallons of water in the water cooler when it is completely full.

To learn more about dimensions click on,

https://brainly.com/question/30672411

#SPJ4

A line of reflection in a triangle can be any line that acts as a mirror image, such that the reflected image of the triangle is congruent to the original triangle.

This line is perpendicular to the plane of the triangle and bisects the angle between the two sides that are being reflected.

To be sure that each point was reflected across this line, we apply the reflection rule.

The reflection rule states that the distance from a point to the line of reflection is equal to the distance from its reflection to the line of reflection. This ensures that the reflected image of the triangle is congruent to the original triangle.

In an isosceles right triangle, two of its sides are congruent. This means that it satisfies the Angle-Side-Angle (ASA) congruence theorem. The ASA theorem states that if two triangles have two congruent angles and a congruent side between them, then the two triangles are congruent.

In addition to satisfying the ASA congruence theorem, an isosceles right triangle also satisfies the Pythagorean theorem. The Pythagorean theorem states that in a right triangle, the square of the length of the hypotenuse (the side opposite the right angle) is equal to the sum of the squares of the lengths of the other two sides.

Finally, the reflection of a triangle is considered a rigid motion, as it preserves the size and shape of the triangle.

Rigid motions do not change the lengths of the sides or the angles between them. They only change the position of the triangle in space. In the case of reflection, the triangle is flipped over the line of reflection, but its size and shape remain unchanged

Read more about isosceles triangle here:

https://brainly.com/question/25812711

#SPJ1

Isosceles Right Triangle Reflection to prove ASA Congruence

Answer the following questions:

What line of reflection did you choose for your transformation?

How are you sure that each point was reflected across this line?

What reflection rule did you apply to your triangle?

What other properties exist in your triangle? Discuss at least two theorems you learned about in this module that apply to your triangle. Make sure to show evidence by discussing your triangle's measurements.

Did your triangle undergo rigid motion? Explain why.

The number of vegetable seeds Frank is going to plant is 3b + 1

From the question, we are to determine the number of vegetable seeds Frank is going to plant on the gardens

From the given information, we have that

"Frank in going to plant b vegetables in one garden"

and

"2b+1 vegetables seeds in a another"

To determine the number of vegetable seeds he would be planting in the gardens, we would find the sum of the vegetable seeds he is planting in the first garden and the second garden

That is,

b + (2b + 1)

= b + 2b + 1

= 3b + 1

Hence, the number of seeds is 3b + 1

Learn more on Calculating sum of seeds here: https://brainly.com/question/12501544

#SPJ1

The length of major arc CBD is given as follows:

C = 40.39 m.

The circumference of a circle of radius r is given by the multiplication of 2 by the number π = 3.14 and the radius r, as follows, hence the equation is given as follows:

C = 6.28r.

For this problem, the parameters are given as follows:

Hence the arc length is given as follows:

C = 5/7 x 6.28 x 9

C = 40.39 m.

More can be learned about the radius of a circle at brainly.com/question/24375372

#SPJ1

Regular hexagon is a closed shape polygon having six equal sides and six equal angles.

A regular hexagon is defined as a closed 2D shape made up of six equal sides and six equal angles.

Each angle of the regular hexagon measures 120 degrees.

A hexagon has six angles and the sum of all six interior angles is 720 degrees. In a regular hexagon, each interior angle measures 120 degrees.

Polygon

A polygon can be defined as a flat or plane, two-dimensional closed shape bounded with straight sides. It does not have curved sides. The sides of a polygon are also called its edges. The points where two sides meet are the vertices of a polygon.

learn more about hexagon here:-

https://brainly.com/question/3295271

#SPJ4

The complete table is

Sulfur atoms         6     9     12   27

Oxygen atoms     12    18    24   54    

A ratio in mathematics is a comparison of two or more numbers that shows how big one is in comparison to the other.

A ratio can be compared by the division of two numbers. For example, the ratio of a and b can be represented as a: b and read as a is to b. Here a: b can be written as a/b

Here we have  

The ratio of oxygen atoms to sulfur atoms in sulfur dioxide is always the same. The table shows the number of atoms in different quantities of sulfur dioxide.  

The given table is

Sulfur atoms         6     9     12   ___

Oxygen atoms     12    __   ___   54      

Let x, y, and z be the missing values in the table

Given that ratio of oxygen atoms to sulfur atoms in sulfur dioxide is always the same.  

=> 12/6 = x/9 = y/12 = 54/z    

Now the x, y, and z values can be calculated as follows

Take 12/6 = x/9  

=> 2 = x/9    

=> x = 18  

Take 12/6 = y/12  

=> 2 = y/12

=> y = 24

Take 12/6 = 54/z  

=> 2 = 54/z

=> z = 54/2

=> z = 27    

Therefore,

The complete table is

Sulfur atoms         6     9     12   27

Oxygen atoms     12    18    24   54      

Learn more bout Ratios at

https://brainly.com/question/13419413

#SPJ1

The complete Question is given in the picture

The next number in the series 1\325,1\176,1/88,1/44,1/22 is 1/44.

Depending on whether the sequence is finite or infinite, the series might be either infinite or finite.

To find the pattern in the series, we can look at the denominators of the fractions. We can see that the denominators are getting multiplied by 2 in each successive term.

So the next term in the series would have a denominator of 1/11 * 2 = 1/22 * 1/2 = 1/44. Therefore, the next number in the series would be 1/44.

So the complete series is:

1/325, 1/176, 1/88, 1/44, 1/22, 1/44.

To learn more about series here:

https://brainly.com/question/11346378

#SPJ4

The equation to represent the given scenario is 642=239+64x.

In mathematics, an equation is a formula that expresses the equality of two expressions, by connecting them with the equals sign =.

Given that, Ed is on a road trip. He has already traveled 239 miles and is driving at a rate of 64 miles per hour.

Let x be the number of hours.

We know that, Distance =Speed×Time

Now, total distance = 239+64×x

642=239+64x

Therefore, the equation to represent the given scenario is 642=239+64x.

To learn more about an equation visit:

https://brainly.com/question/14686792.

#SPJ9

The most appropriate chart to see the correlation between car mileage and year the car was built for various car models would be a scatterplot chart.

In a scatterplot chart, each point represents a pair of values: one value on the x-axis (in this case, year the car was built) and another value on the y-axis (in this case, mileage). By plotting these pairs of values for each car model in the sample, we can visually examine the relationship between mileage and year built for each car model and determine if there is a correlation between the two variables.

A line chart is used to display data that changes over time, typically for a single variable. A heatmap chart is used to show the magnitude of values for different categories using different colors. Therefore, neither of these chart types would be appropriate to show the correlation between mileage and year built for various car models.

To learn more about correlation here:

https://brainly.com/question/28898177

#SPJ4

Answer:2\1

Step-by-step explanation:24\12 then simplify and get 2\1

i don't speak that language so i don't know what your saying. im sorry

The circumference of a circle is equal to 2π multiplied by its radius. Therefore, the circumference of a circle with a radius of 15 cm is equal to 2π multiplied by 15 cm, or 30π cm.

The answer would be D. 35x² + 29x +6.

What is the Solution of an Equation?

The value of a variable in an equation is the answer that, when inserted into the equation, makes the equation true. It is discovered by relegating the variable to one side of the equation, with the value on the other side being the solution.

To multiply two polynomials, we use the distributive property.

Starting with the first term, we multiply 5x and 7x, then add 2 and 7x, and then add 2 and 3. The result is:

= (5x + 2)(7x + 3)

= 35x² + 33x + 14x + 6

= 35x² + 29x + 6

Therefore, The answer would be D. 35x² + 29x +6.

To know more about Solution of an Equation visit,

https://brainly.com/question/29594485

#SPJ1

Answer:

$1522.5

Step-by-step explanation:

(7.25 x 15)14

(108.75)14

= 1522.5

Answer:

ray ts

Step-by-step explanation: