v = s/t
44 m/s = 3.5 m/t
t = 3.5 m : 44 m/s
t = 0.08 s
a = v/t
a = 44 m/s/0.08 s
a = 550 m/s²
a : g = 550 m/s² : 10 m/s²
a : g = 55 : 1
#LearnWithEXO
We can only tell the earth is rotating almost 960 miles an hour if we
a
look at other people around us as a reference point.
b
look at mountains far away from us as a reference point.
c
use a reference that is not on the earth, like the sun or stars.
Answer:
C
It is C i have to type this because i need 20 characters.
a bean is placed evenly on a pivot point (fulcrum) on one side of 10N weight is placed 2m from the pivot and a 40N weight a further 4m from the pivot point. How far from the pivot point must the centre of gravity of an 80N weight placed to perfectly balance the beam horizontally?
Answer:
hope you will understand
Explanation:
2. Starting from rest, a racecar has a displacement of 201 m south while accelerating at
16 m/s?. Calculate the time it takes the car to travel the 201 m.
Help solve please!
Answer:
Explanation:
Assuming you mean a = 16 m/s²
s = ½at²
t = √(2s/a)
t = √(2(201)/16)
t = 5.012484...
t = 5.0 s
the atmosphere of mercury and mars are very thin.what effects does the thin atmosphere on the temperature on the surface of this planet?
Answer:
The effects of the thin atmosphere are that the surface of the planet is going to be much hotter and not only that but also more radioactive than a planet with a thicker atmosphere. The thick atmosphere on other planets prevents a lot of radiation from going straight to the surface of the planet.
Explanation:
During hypnosis, people:
A. can accurately recall memories of early childhood and infancy.
B. lose all awareness of their surroundings.
C. temporarily suspend their sense of initiative.
D. are in a deep trance, which is similar to stage 3 NREM sleep.
During hypnosis, people temporarily suspend their sense of initiative. Hence, option (C) is correct.
What is hypnosis?
According to one definition, hypnosis is "a waking state of awareness, (or consciousness), in which a person's attention is diverted from his or her immediate surroundings and is consumed by interior experiences such as feelings, cognition, and images." In order to induce hypnosis, the subject must concentrate and become sufficiently absorbed in their imagination. A hypnotic world is created by the physician and patient through the use of suggestions and their acceptance.
Our everyday 'trance' states include things like becoming lost in a good book, driving down a familiar route without being aware of it, being in prayer or meditation, or engaging in a mindless or creative task. Our conscious awareness of our surrounds and an inner awareness exist on a continuum, thus even though one's emphasis is mostly internal in these states, one does not necessarily lose all awareness of the outside world.
Learn more about hypnosis here:
https://brainly.com/question/5116320
#SPJ2
Imagine that you are immersed under a beautiful cosmic meteor shower. Which
instrument would BEST help you view the largest portion of the sky?
refracting telescope
binoculars
sextant
compound telescope
Answer:
binoculars
Explanation: I am taking astronomy
Answer: B) binoculars just took the test
Explanation:
In an electrostatic field, path 1 between points A and B is twice as long as path 2. The electrostatic work done on a negatively charged particle that moves from A to B along path 1 is W1.
How much work is done on this particle if it later goes from A to B along path 2? Express your answer in terms of W1.
W2=??
Answer:
W2 = W1
Explanation:
work is independent of the path taken between the points.
What is the reason for the widespread use of fins on surfaces? Group of answer choices Decreasing the rate of heat transfer from a surface by increasing the heat transfer surface area Decreasing the rate of heat transfer from a surface by decreasing the heat transfer surface area Increasing the rate of heat transfer from a surface by decreasing the heat transfer surface area Increasing the rate of heat transfer from a surface by increasing the heat transfer surface area
Answer:
ask your member
Explanation:
kayo lang din makakasagot nyan
what is the best name for binary compound of nitrogen and oxygen
A . Nitrogen oxide
B. Nitrogen oxnie
C.oxide nitrogen
D.Nitride oxygen
Kinetic and Potential energy
The main difference between potential and kinetic energy is that one is the energy of what can be and one is the energy of what is. In other words, potential energy is stationary, with stored energy to be released; kinetic energy is energy in motion, actively using energy for movement.
Potential energy is due to_blank_?
Answer:
To summarize, potential energy is the energy that is stored in an object due to its position relative to some zero position. An object possesses gravitational potential energy if it is positioned at a height above (or below) the zero height.
Explanation:
if it helped plz mark brainiest
A school bus moves at speed of 35 mi/hr for 20 miles. How long will it take the bus to get to school
Answer:
Explanation:
Assuming school is at the end of the 20 mile route, then
20 mi / 35 mi/hr = 0.57142...hr
which is about 34 minutes 17 seconds
Please help with this diagram as soon as possible.
Which of the following is a true statement about computational models?
1. Computational models are more objective than humans, so computational models can be used to minimize bias.
2. Computers carry out the exact instructions you give them, whether they are the correct instructions or not.
3. Computational models, especially ones on computers with strong computational power, can fix errors in inputted equations.
4. Most computers have limits to computational power, with the exception of supercomputers.
The true statement about computational models is: 2. Computers carry out the exact instructions you give them, whether they are the correct instructions or not.
A computational model can be defined as the systematic use of computers to simulate real-complex systems, as well as studying them through the algorithmic or mechanistic use of various fields in science such as:
Mathematics.Computer science.Physics.A computer refers to an electronic device that is designed and developed to receive data (instructions) in raw form as an input, and then processes these data into an information (output) that is usable by an end user.
Generally, computers are designed to carry out the exact instructions an end user gives to them, whether those instructions are correct (right) or not (wrong).
Read more: https://brainly.com/question/17402566
In two paragraph of lines each, describe how you
would simplify, for your
grade 10 learners the
following topics
1.1 Electricity and magnetism.
The question above wants to assess your ability to simplify complex matters. In that case, I can't answer this question for you, but I'll show you how to answer it.
First, you should research electricity and magnetism. This research will make you understand the subject and all its elements. You can do this research in textbooks and digital platforms aimed at children and teenagers since these media usually present subjects in a more simplified way.
After doing this research, you will be able to write a text about electricity and magnetism as follows:
Present the main focus of this subject.Present the elements that make up this subject.Present how this subject applies in the real world.Present the importance of this subject in human life and society.Remember that you must use simple language, without the use of technical terms, but with common terms.
More information:
https://brainly.com/question/14870576?referrer=searchResults
A skateboarder rolls off a horizontal ledge that is 1.32 m high and lands 1.88 m from the base of the ledge what was his initial velocity
the weight on each foot of an elephant 500n. what will be the contact force
Answer:
The weight of an object is the force it exerts due to gravity. Pressure is force per unit area, or force divided by area over which the pressure is exerted.
Explanation:
1. For Jo:
1. For Jo:force = 500 N
1. For Jo:force = 500 Narea = 0.0001 m^2
1. For Jo:force = 500 Narea = 0.0001 m^2pressure = F/A = 500N/0.0001m^2 = 5,000,000 N/m^2
can someone help with this plss
Answer:
push,weight,friction
Explanation:
Bcs it has 3
What does democratized knowledge mean?
A. People decide together what information the public needs to
know
B. Everyone has a right to own a computer with Internet access.
C. Everyone can vote to determine what knowledge should be
shared.
D. Everyone has equal access to knowledge that they can also
contribute to
Answer:
d
Explanation:
The democratization of knowledge is the acquisition and spread of knowledge amongst a wider part of the population, not just privileged elites such as clergy and academics.
Which statement describes how nuclear power generation systems work?
O A.
The heat for the electricity generation process comes from nuclear fusion.
ов.
Electricity is generated directly when two atoms split into smaller ones.
O C.
The heat for the electricity generation process comes from nuclear fission.
OD.
Electricity is generated directly when two atoms join together.
Answer:
c- heat for electricity generation process comes from nuclear fission
Explanation:
nuclear fission is splitting of atoms to release energy held at nucleus of atoms
Energy can be transformed from one form to another. The diagram shows one such process.
Which energy transformation is represented in the diagram?
nuclear to thermal and radiant
nuclear to electrical and chemical
chemical to nuclear and radiant
chemical to electrical and nuclear
Answer:
b
Explanation:
Answer
nuclear to electrical and chemical
Explanation:
Energy can be transformed from one form to another. The diagram shows one such process.
Which energy transformation is represented in the diagram?
nuclear to thermal and radiant
nuclear to electrical and chemical
chemical to nuclear and radiant
chemical to electrical and nuclear and it is ovisly b
FIGURE 1 shows a 10 kg uniform metal rod with 2.0 m long pivoted at its centre C. A 20 N force is exerted on the rod, 0.5 m from point C. If the rod is in equilibrium, determine the
a) force, F needed.
b) magnitude and the direction of the force exerted at point C.
Answer:
Explanation:
Assuming we are looking parallel to a horizontal pivot pin with positive UP to the top of the picture, and the 20 N force acts perpendicular to the rod.
Sum moments about C to zero assume CW is the positive moment.
The rod mass causes no moment because there is no moment arm about C.
Fsin50[1.0} - 20[0.5] = 0
F = 10/sin50
F = 13 N
Summing vertical forces to zero With R being the pin reaction at C
Ry - F - 20sin50 - mg = 0
Ry = 13 + 20sin50 + 10(9.8)
Ry = 126.32 N
Summing horizontal forces to zero assuming a right directed force is positive.
Rx + 20cos50 = 0
Rx = -12.855...
R = √(-12.855² + 126.32²) = 126.972
R = 127 N
θ =arctan(126.32/-12.855) = 95.8107... = 5.8° CCW from UP
How does the current in a resistor change if the voltage across the resistor is
increased by a factor of 2?
If the voltage across a resistor is increased by a factor of two, the current in the resistor doubles.
What is ohm’s law?When all physical parameters and temperature are constant, Ohm's law claims that the voltage across a conductor is directly proportional to the current flowing through it.
This current-voltage connection may be expressed mathematically as,
The Equation of Ohm's Law;
V∝I
V'∝I'
Hence, if the voltage across a resistor is increased by a factor of two, the current in the resistor doubles.
To learn more the ohm's law refer to the link;
https://brainly.com/question/796939
#SPJ1
A ball of mass 2 kg is being pulled sideways by a force 3 N to the right, and a force of 8N to the left - these are the only forces acting on it..
1.) What is the net force in the horizontal (x) direction?
2.) what is the acceleration in the horizontal (x) direction?
Answer:
Explanation:
1.) What is the net force in the horizontal (x) direction?
Fnet = 8 - 3 = 5 N left
2.) what is the acceleration in the horizontal (x) direction?
a = Fnet/m = 5/2 = 2.5 m/s² left
Michael stands upright and allows his right arm to swing back and forth, naturally and without forcing, like a pendulum. He measures the time for 21 oscillations (complete cycles) to be 28.1 s. Assume his arm (length L) behaves as a simple pendulum, with an effective length of 2/3 L. Find the length of his arm, L.
Answer:
ytdgnrjjksmzjj3hfgbdhehkj jfjbcjbwbjrhrhb jdhbbjhhrhrhhjrjjr jfjnekrj
The length of his arm, L = 0.67 m.
What is time period?
A basic pendulum consists of a point mass hung by a tightly supported, weightless, and inextensible string.
T = 2π√ L/g, where L is the pendulum's length and g is the acceleration brought on by gravity, is the formula for a pendulum's period.
Given in the question the time for 21 oscillations (complete cycles) to be 28.1 s. Assume his arm (length L) behaves as a simple pendulum, with an effective length of 2/3 L.
T = 2π√ L/g
T = 2π√2l/3g
T = 28.1/21
T = 1.33
2π√2l/3g = 1.33
l = .67 m
The length of his arm, L = 0.67 m.
To learn more about time refer to the link:
brainly.com/question/13764813
#SPJ5
Suppose that John lives on a square block that is 180 yards per side, and in the evenings, he walks with his dog around the block for a little exercise.
A) If John walks once around the block, what distance does he travel?
B) If John walks once around the block, what is his final displacement?
Answer:
It's A
Explanation:
Although I'm not sure about the second one, I'm sure the first one is A
PLEASE HELP ME RIGHT AWAY, ITS DUE NOW PLEASE HELP ME!!!!!!!
Answer:
B
Explanation:
0= no movement
Answer:
Explanation:A
How to find force if mass time and distance is given?
Answer:
For example, speed is a length divided by time. Force is mass times acceleration, and is therefore a mass times a distance divided by the square of a time. We therefore say that [Force] = MLT−2.
a dishwasher has a wattage of 1,500 watt. It takes the dishwasher 100 minutes to complete one wash cycle. How much energy does the dishwasher use to complete one wash cycle
Answer:
ima be honest i don't know the answer im just doing this so brainly can leave me alone sorry lol
Explanation:
blah blah blah blah blah blah blah yada yada yada i answerd this question i guess
An example of the law of gravity being applied is
Basketball dropping
Bike going off a jump
A diver pushing off a diving board
A flying disc being passed between two people
