percentage of zinc= 5.985/20 X 100= 29.5%
let x represents zinc and y be magnesium so
Zinc(s) + 2HCl(aq) -----> ZnCl2(aq) + H2(g)
Mg(s) + 2HCl(aq) -----> MgCl2(aq) + H2(g)
1.152 g of hydrogen gas=( x/65.3 + y/24.305) 20
= 3.08 x10^-2 + 0.8295-8.30
=x=5.985
y= 4.015
percentage of zinc= 5.985/20 X 100= 29.5%
The hydrogen gas escapes, so the two products of Zinc Chloride and Magnesium Chloride will then react with Silver Nitrate. Again, I combine both of the reactions
To learn more about zinc:
https://brainly.com/question/13890062
#SPJ4
Transmembrane proteins move ions or molecules across a membrane against their concentration gradient. True or false?.
The above statement is True.
Transmembrane proteins are the integral proteins, which helps ions and molecules to cross the membrane against the concentration gradient.
The transmembrane protein consist of both hydrophobic and hydrophilic amino acid side chains in his structure.
A membrane protein Is a protein molecule that is joined to or connected to an organelle’s or cell’s membrane. Depending on how the protein is connected to the membrane, membrane proteins can be divided into two categories, integral and peripheral membrane proteins.
The plasma membrane contains integral membrane proteins that are permanently ensconced there. They perform a variety of crucial functions like moving molecules through ion channels or transferring them across membranes.
To learn more about transmembrane protein, refer this link.
https://brainly.com/question/3167745
#SPJ4
What is the most-correct statement about the polypeptide with the primary sequence atavistic?
The most appropriate answer among the option is a polypeptide with a primary sequence it contains four nonpolar neutral residues.
What is polypeptide?
A longer, unbroken, continuous peptide chain is known as a polypeptide. Peptides therefore belong to the wide chemical families of biological polymers and oligomers, along with nucleic acids, oligosaccharides, polysaccharides, and others.
A polypeptide with typically more than 50 amino acids is referred to as a protein. One or more polypeptides with a physiologically functional structure make up a protein. Proteins commonly interact with other proteins, other macromolecules like DNA or RNA, or intricate macromolecular complexes.
Amino acids that have been incorporated into peptides are called residues. A water molecule is released as a result of every amide connection.
To learn more about polypeptide visit here :
https://brainly.com/question/1542336
#SPJ4
1. We have new knowledge of how charge can be transferred from one object to another
(water + balloon; balloon + wall; tape). How might that information help us explain the
differences we noticed when we tested the conductivity of deionized water, salt water, and
sugar water?
Charge can be transferred from one object to another in three way conduction, polarization, and friction
Whenever electrons are transferred between objects, neutral matter becomes charged and three ways this can occur are referred to as conduction, polarization, and friction conduction means when there is direct contact between materials that differ in their ability to give up or accept electrons when two different materials are rubbed together, there is a transfer of electrons from one material to the other material and this causes one object to become positively charged (the electron loser) and the other object to become negatively charged (the electron gainer)
Here given object is water + balloon; balloon + wall; tape then you rub a balloon against your clothes and it sticks to the wall, you are adding a surplus of electrons (negative charges) to the surface of the balloon the wall is now more positively charged than the balloon and we tested the conductivity of deionized water positively charged
Know more about charge transferred one object to another
https://brainly.com/question/28661233
#SPJ1
What molecules are found in all or almost all organic compounds?
a. Carbon and oxygen
b. Hydrogen and oxygen
C.
Carbon and nitrogen
d. Carbon and hydrogen
Please select the best answer from the choices provided
Ο Α
OB
O C
OD
Sodium benzoate is a widely used food preservative. what type of cells can utilize sodium benzoate as a carbon and energy source?
Sodium benzoate is a widely used food preservative. The type of cell that can utilize sodium benzoate as a carbon and energy source is pseudomonas cell.
What are pseudomonas cells?Psuedomonas cells are simple cell. They are gram-negative or gram-positive bacteria. These cells infect humans, animals, and plants.
They grew on fruits and vegetables. They also infect or contaminate food. So they are very harmful to all living organisms.
Thus, a common food preservative is sodium benzoate. Pseudomonas cells are the only kind of cell that can use sodium benzoate as both a carbon and an energy source.
To learn more about pseudomonas cells, refer to the link:
https://brainly.com/question/15014933
#SPJ4
The atomic orbital of the quantum mechanical model is very similar to the orbit described by the bohr model. True or false
The given statement is false.
In physics, a quantum (plural quanta) is the minimum amount of any bodily entity (physical property) concerned in an interaction. The vital thinking that a bodily property can be "quantized" is referred to as "the speculation of quantization".[1] This capability that the magnitude of the bodily property can take on only discrete values consisting of integer multiples of one quantum.
Learn more about quantum here:
https://brainly.com/question/16977590
#SPJ4
Engineers in russia invented a new way to create colorful art with a ____laser______.
Engineers in Russia invented a new way to create colorful art with constructive laser art.
What is constructive laser art?Modern industrial life and urban space were intended to be reflected in constructivist art. It produces art using industrial manufacturing techniques and inexpensive materials.
The idea behind constructivism was to replace conventional art by emphasizing engineering rather than painting. Russia started a colorful way to create new art.
Thus, Russian engineers developed a fresh method for producing vivid artwork using constructive laser art.
To learn more about constructive laser art, refer to the link:
https://brainly.com/question/26672637
#SPJ4
5 examples of ionic bonding
Answer:
NaCl: sodium chloride.
NaBr: sodium bromide.
NaF: sodium fluoride.
NaI: sodium iodide.
KF: potassium fluoride.
Explanation:
Hope this helps!
What does it mean for matter to change physically?
Answer:
Its when it transforms into a diffrent product like water to ice.
Explanation:
What is the nucleotide sequence of an mrna strand that has been transcribed from the dna sequence ggtagc?
CCAUCG is the nucleotide sequence of an mrna strand that has been transcribed from the DNA sequence ggtagc.
What is a nucleotide sequence?Transfer RNAs interact with the ribosome system to translate a nucleic acid sequence, known as a messenger RNA or mRNA, into the protein it encodes. Transfer RNAs partition the nucleic acid sequence into triplet codons, each of which specifies one amino acid, by binding to three nucleotides at once. The sequence does not contain punctuation signals to indicate which reading frame should be used, hence the nucleic acid can be read in three different phases or reading frames depending on the point at which division into codons begins. An addition or deletion in the nucleic acid sequence that changes the translation process from one reading frame to another is known as a frameshift mutation.To know more about the nucleotide sequence, refer:
https://brainly.com/question/13540269
#SPJ4
If you have 9 moles of cacl2 and all the na3po4 i needed, how many moles of nacl could you produce?
If you have 9 moles of CaCl₂ and all the Na₃PO₄i needed 18 moles of NaCl
In the chemical reaction here
CaCl₂ + Na₃PO₄ → Ca₃(PO₄)₂ + NaCl if we balance this chemical reaction then
3CaCl₂ + 2Na₃PO₄ → Ca₃(PO₄)₂ + 6NaCl then Ca=1×3=3
,Cl=2×3=6,
Na=3,PO₄=1,
all this are in reactant Ca=3, Cl=1, Na=1, PO₄=2 all this are in product so NaCl produce 18 moles.
Know more about CaCl₂ and Na₃PO₄ moles .
https://brainly.com/question/28499515
#SPJ4
Calculate the moles of ammonia present in a 3.939 g sample of ammonia, which has a molar mass of 17.030 g/mol.
The moles of ammonia present in a 3.939 g sample having molar mass of 17.030 g/mol is 0.23 mole.
The mass of one mole of a substance, whether be an element or a compound is known as the molar mass.
If the molar mass of ammonia is 17.030 g/mol, then
In 1 mole of ammonia there are 17.030 g.
So, by definition of molar mass, there are-
17.030 g in 1 mole of ammonia,
In 3.939 g of ammonia, number of moles are -
number of moles = Given mass
Molar mass
moles = 3.939 g = 0.23 mol
17.030 g/mol
The moles of ammonia present in a 3.939 g sample are 0.23 mol.
To learn more about moles,
brainly.com/question/15432006
#SPJ4
What type of ring strain is predominantly responsible for causing cyclooctane to be higher in energy than linear octane?
a. torsional strain
b. transannular strain
c. angle strain
d. isomer strain
Transannular strain predominantly responsible for causing cyclooctane to be higher in energy than linear octane.
Linear octane is a chain like structure in which 8 carbon atom are present and cyclooctane is a cycle like structure in which 8 carbon atom are present. cycloalkanes tend to give off a very high and non-favorable energy, and the spatial orientation of the atoms is called the ring strain in that linear octane there is no ring strain because this is like a chain and in cyclooctane transannular strain is seen because it is cycle like structure the unfavorable interactions of ring substituents on non-adjacent carbons called transannular strain in cyclooctane transannular strain is more that's why energy is higher than linear octane.
Know more about ring strain
https://brainly.com/question/28494146
#SPJ4
Which could represent the reaction mixture after the complete combustion of acetaldehyde, ch3cho?
The term that represents the reaction mixture after the complete combustion of acetaldehyde, ch3cho is H-O-H, O-C-O. The correct option is b.
What is complete combustion?Complete combustion is the process of consuming all oxygen in the reaction. In the process of combustion, oxygen is needed for the process. In incomplete combustion, oxygen is not present in the reaction.
In incomplete combustion, less energy is produced because of less oxygen in the reaction.
The inorganic substance that is showing the complete combustion process is H-O-H, O-C-O.
Thus, the correct option is b. H-O-H, O-C-O.
To learn more about combustion, refer to the link:
https://brainly.com/question/12783824
#SPJ4
The question is incomplete. Your most probably complete question is given below:
a. C-O; O-H, O-C
b. H-O-H, O-C-O
c. H-C-C-C-H
d. C-O, O-C, H-H
e. O-C-H, H-H-H
Calculate the energy (a) in ev and (b) in joules of the third energy level (n= 3) ofa hydrogen atom.
The energy (a) in EV and (b) in joules of the third energy level (n= 3) of the hydrogen atom.
-1.51 eV
-2.42 x 10^-19 J
In physics, energy is a quantitative property that is transferred to a body or physical system and can be perceived in the performance of work or in the form of heat and light. Energy is Conserved - The law of conservation of energy states that energy can be transformed into form, but cannot be created or destroyed.
The energy price cap, introduced in 2019 by market regulator Ofgem, sets the maximum amount (known as the “unit price”) that utilities can charge per kWh of gas and electricity. There is no right or wrong answer to choosing between a fixed power plan and a variable power plan. Which energy rate is best for your home depends on your assessment of future energy prices and your willingness to take risks. Compare energy suppliers to find the perfect match.
Learn more about energy here
https://brainly.com/question/13881533
#SPJ4
Which are nutrition components that must appear on the nutrition facts food label?
Total calories (kcal), calories from fat, saturated fat, trans fat, cholesterol, sodium, total carbs, fiber, sugars, protein, vitamin A, vitamin C, calcium & iron are nutrition components that must appear on the nutrition facts food label.
Nutrition is an important factor in health and development. Better nutrition is associated with improved infant, child, and maternal health, stronger immune systems, safer pregnancies and births, reduced risk of non-communicable diseases (such as diabetes and cardiovascular disease), and longer lifespans. doing. Healthy children learn better. Well-nourished people are more productive and can create opportunities to gradually break the cycle of poverty and hunger.
Malnutrition in all its forms poses a significant threat to human health. I'm facing Malnutrition has several forms and including undernutrition (wasting or underdevelopment), inadequate vitamins or minerals, overweight, obesity, and consequent diet-related noncommunicable diseases.
Learn more about nutrition here
https://brainly.in/question/16577844
#SPJ4
What is the hydrogen deficiency index (hdi) for a compound with the molecular formula c9h10o?
Hydrogen deficiency index (HDI) for a compound with the molecular formula C9H10O.
What is Hydrogen Deficiency Index(HDI)?
A "deficit" of H atoms would exist if any of the bonds were replaced with double or triple bonds or if rings were involved. We may determine whether and how many multiple bonds and rings are present from the molecular formula by computing the index of hydrogen deficit (IHD). IHD is also known as Unsaturation Degree.
The compound C9H10O has five pi bonds, which is a count of deficiency.
Thus, HDI for C9H10O is five.
To learn more about Hydrogen Deficiency Index(HDI) from the given link below,
https://brainly.com/question/13652394
#SPJ4
In normal decimal form and scientific notation
Which name is inconsistent with iupac nomenclature rules? 2-ethyl-4-methylhexane 2,3-dimethyl-4-propyldecane 4,5-dimethyloctane 3,3,5-triethyl-3-methylheptane 3,4-dimethyl-4-propyloctane
The correct answer is 4-ethyl-2-propylhexane.
Nomenclature is a device for giving names to matters within a specific career or field. For instance, you may additionally have heard of binomial nomenclature in biology class. It refers to the way of referring to living matters via two names, like calling people Homo sapiens.
Learn more about Nomenclature here:
https://brainly.com/question/15324006
#SPJ4
Substituting the residue at position 54 of bvga with which amino acid will least likely prevent the expression of the ptx operon?
a. glycine
b. asparagine
c. glutamate
d. alanine
Glutamate is an amino acid that is put together in the body and also take place commonly in many foods.
Glutamate acts as a neurotransmitter.
Neurotransmitter act as a messenger.
A chemical messenger.
According to question,
C- one and only that is negative charge
As glutamate and aspartate both shore up a negative charge at corporal pH,a interchange of glutamate for an aspartate is the most reactionary and unlikely to act on the BvgA upholder binding and the C- only one that is negative charged of the pTx operon
Glycine, Asparagine and Alanine have no charged.
To know more about Glutamate here :
https://brainly.com/question/24146533?referrer=searchResults
#SPJ4
What multiplicities are observed for the signals in the off-resonance decoupled 13c nmr spectrum of 1-chloropropadiene?
13c nmr spectrum of 1-chloropropadiene is two singlet and 1 doublet.
Nuclear Magnetic Resonance NMR spectroscopy is the use of NMR phenomena to study the physical, chemical, and biological properties of matter Carbon-13 is used in NMR because it has an odd mass number. this means that it has a property called spin and behaves a bit like a bar magnet when placed in an external magnetic field. because of this, carbon-13 atoms show up in NMR spectra.1-chloropropadiene structure
1-chloropropadiene structure are Cl-C=C=C two singlet and 1 doublet signals are seen.
Know more about 13c nmr spectrum
https://brainly.com/question/28500110
#SPJ4
In which group do all the elements have the same number of valence electrons?
a. p, s, cl
b. ag, cd, ar
c. na, ca, ba
d. p, as, se
e. none of these
The correct option is (e) none of these ,Valency is the ability of an element to combine.
What is Valency?Valency is the ability of an element to combine. Elements in the same group of the periodic table have the same valency. An element's valency is determined by how many electrons make up its outer shell.
A property of an element called "valency" defines how effectively it can meld with other elements. It is a way to count how many electrons are in an atom's outermost shell.
An atom's stability is determined by its valence electrons. Additionally, valence electrons are in charge of an atom's stability. The Octet Rule states that atoms often gain or lose electrons to reach the octet state, which is defined as having eight electrons in their valence shell. They stabilise at this stage.
To learn more about valency go to -
https://brainly.com/question/13552988
#SPJ4
A lone pair must reside in which orbital type(s) to participate in resonance/conjugation/delocalization?
If a lone pair is participating in resonance, this capability the atom is both Sp2 or Sp hybridized. Looking at the Sp2 case, that ability there are 3 Sp2 orbitals and one P orbital. Assuming there is no formal cost on the atom, the three hybrid orbitals are used for bonding and the lone P-orbital holds the lone pair. Sp3 orbitals are no longer involved with resonance so the lone pair worried in resonance should never be in an Sp3 orbital.
A mathematically described area round a nucleus in an atom or molecule that may also include zero, one, or two electrons Electrons organize themselves in cloudlike areas round the nucleus referred to as orbitals.
Learn more about orbitals here:
https://brainly.com/question/18914648
#SPJ4
3. Rutherford's gold foil experiment showed several new things abOut the structure of the atom. Which results support the claim that the atomn has a dense, positively charged core? Choose the two statements that apply. A. Some positive particles deflected at sharp angles. B. Some negative particles defiected at sharp angles. C. Most of the positive particles passed straight through the foil. D. Some positive particles bounced back in the direction they came from.
Answer:
D. Some positive particles bounced back in the direction they came from
The formulas for ethane, ethene, and ethyne are c2h6 , c2h4 , and c2h2 , respectively. Rank these compounds by the length of the carbonâ€"carbon bond.
The descending order of carbon-carbon bond length in C₂H₆, C₂H₄, and C₂H₂ is:-
C₂H₆, C₂H₄, C₂H₂
Hydrocarbons are compounds that consist of only hydrogen and carbon.
On the basis of the presence or absence of double bonds/triple bonds, they are of three types- alkanes, alkenes, and alkynes.
Alkanes do not contain any double bonds.Alkenes contain one or more double bond(s) between the carbon atoms.Alkenes contain one or more triple bond(s) between carbon atoms.The comparison between alkanes, alkenes, and alkynes is given in the adjoining image.
We can see that the bond length in alkanes like C₂H₆ is 1.53 A which is greater than alkenes(C₂H₄) , 1.33 A which is still greater than alkynes(C₂H₂) with a value of 1.18 A.
Thus, The descending order of carbon-carbon bond length in C₂H₆, C₂H₄, and C₂H₂ is:
C₂H₆, C₂H₄, C₂H₂
To know more about "hydrocarbons", refer to the link given below:
brainly.com/question/16858042?referrer=searchResults
#SPJ4
Why is it necessary to keep the temperature constant, but not the concentration of the reactants when determining the rate law expression through the initial rate method?
It is necessary to keep the temperature constant, but not the concentration of the reactants when determining the rate law expression.
What is the rate law expression?
A chemical reaction's rate and the concentrations of the reactants involved are correlated by an expression known as the rate law, commonly referred to as the rate equation or rate law equation.
A frequent way for determining rate laws is the concept of beginning rates. The method includes determining the starting rate of a reaction, as the name initial rate method would imply. To observe how the reaction rate varies, the measurement is repeated for several sets of beginning concentration conditions.
When establishing the rate law expression using the initial rate technique, it is required to maintain a constant temperature but not the reactant concentration because the rate constant fluctuates with temperature. k=Ae^-Ea/RT.
To learn more about rate law expression from the given link below,
https://brainly.com/question/20309887
#SPJ4
Copper can have improved wear resistance if alloyed with ceramic alumina, Al2O3. If a copper alloy has 9.3 wt % Al2O3, what is its composition in mol %?
Composition in mole % is 0.091%
Given:
Copper alloy has 9.3 wt % Al2O3 = 9.3 wt/wt%
So the mol % of Al2O3 can be find by
Mole% = w/w% / Mwt
Mwt og Al2o3 = 101.968
Mole% = w/w% / Mwt
= 9.3 / 101.96
Mole% = 0.091%
The term "mole percent" (mol%) refers to the mole fraction in a different format. By multiplying the mole fraction by 100, the mole percent of the specified component can be calculated. Mole fraction multiplied by 100 equals Mole percent.
To learn more about mole percent click the given link
https://brainly.com/question/14783710
#SPJ4
In the mass spectrum of pentane, the presence of a peak with an m/z = 57 most likely is due to the loss of what radical from the molecule?
In the mass spectrum of pentane, the presence of a peak with an m/z = 57 most likely is due to the loss of methyl radical.
The electromagnetic spectrum is the gamut of electromagnetic radiation's frequencies, together with the corresponding wavelengths and photon energies. Electromagnetic waves having frequencies between 1 hertz and 1025 hertz are included in the electromagnetic spectrum. This translates to wavelengths that range from several hundreds of kilometers to only a small portion of an atomic nucleus in size.
Each of the bands that make up this frequency range has a unique name for the electromagnetic spectrum that it contains. The electromagnetic spectrum is made up of radio waves, microwaves, infrared, visible light, ultraviolet, X-rays, and gamma rays, starting at the low frequency (long wavelength) end and ending at the high frequency (short wavelength) end.
To learn more about electromagnetic spectrum from given link
https://brainly.com/question/13803241
#SPJ4
Propane, c3h8, is a common fuel used for cooking and home heating. what mass of o2 is consumed in the combustion of 1.00 g of propane?
3.63g of O2 is consumed in the combustion of 1.00 g of propane.
Propane, c3h8, is a common fuel used for cooking and home heating.
C3H8 + 502---> 3CO2 + 4H20.
The combustion equation must first be balanced as illustrated above. The law of constant proportions can then be used to deduce that for every 1 mol of C3H8, there will be 5 mol of O2.
Using significant figures,
1 mol C3H8 -------> 44 g
1 mol O2 ------> 32g x 5 = 160
= 160/ 44g
160g/44g= 40/11 = 3.63g.
= 3.63g of O2 is consumed in the combustion of 1.00 g of propane.
Learn more about Propane here:
https://brainly.com/question/11697104
#SPJ4
find the number of h atoms present in NH2 CONH2
Answer:
Prolly 4
NH2 CONH2
Explanation:
